Zoeller 405-0009, Model G405, Waste-Mate 400 Series, Sewage Pump, 3 HP, 460 Volts, 3 Phase, 6.1 Amps, Single Seal, 4" Flanged Discharge, 361 GPM Max, 38 ft Max Head, 20 ft Cord, Manual

SKU #: 405-0009
Brand: Zoeller
In Stock! (Ships Today !) This item is In Stock at our warehouse distribution center. Stock orders placed Monday through Friday by 1:00 pm EST. will be shipped the same day. Orders placed Friday after 1:00 pm through Sunday will be shipped on Monday.
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
$1,960.87
Call Sales Counter !
Order By Phone
Calculate Shipping Ship Weight (136.00 lbs)
seal
0 reviews for this product

FEATURES

Zoeller "Waste-Mate" Sewage & Dewatering Pump

This submersible pump is designed for use in residential or commercial dewatering and wastewater applications and can be used to transfer large volumes of water from parking lots, flooded areas and unscreened raw sewage. The innovative vortex impeller design reduces the risk of clogging and allows each pump to pass 3" spherical solids. Constructed of non-corrodible hardware, these durable cast iron pumps include a powder coated epoxy finish to prevent corrosion. Every pump is designed to provide heat dissipation from the motor for longer life and lower life cycle cost. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance. 

Features:

  • Corrosion-resistant, powder-coated epoxy finish
  • Cast iron base, cap, motor and pump housing
  • Oil filled, hermetically sealed, automatic reset thermal overload protected motor
  • Non clogging cast iron vortex impeller
  • Upper sleeve bearing and lower ball bearing running in bath of oil
  • Mechanical shaft seal - carbon and ceramic rotary face seal, with stainless steel wetted parts
  • Stainless steel screws, bolts, washers and lifting bracket
  • Stainless steel handle for easy installation and removal
  • Neoprene square ring & gasket
  • 4” horizontal ANSI flanged discharge
  • Passes 3” spherical solids
  • Maximum temperature: 130° F 
  • 20 ft UL listed, 4-wire neoprene cord
  • Hermetically sealed to be watertight and dust-tight
  • For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump
Control Panel Options
 
Below are the control panels that can be used with this pump:
 

Note:  Image is illustrative and may not reflect details of actual product.

BrandZoeller
Mfg. Number405-0009
ModelG405
SeriesWaste-Mate 400
Product TypeSewage pump
ApplicationSewage/Dewatering pump
OperationManual
Horsepower3 HP
Voltage460 Volts
Phase3
Frequency60 Hz
Discharge Connection4" flange horizontal
Pump Housing MaterialCast iron
Speed1725 RPM
Impeller MaterialCast iron
Seal TypeSingle
Impeller TypeNon-clogging vortex
Maximum Flow355 GPM
Maximum Head38 ft
Maximum Solids Handling3"
Cord Length20 ft
Maximum Fluid Temperature130°F

Pump Products is now distributing the Zoeller 400 series "Waste-Mate" sewage pumps. These submersible sewage pumps are built for wastewater applications in residential or commercial settings. These Waste-Mate pumps can also transport groundwater as well as effluent. Typical uses for such pumps include removing water from parking lots, flooded areas and in areas full of unscreened raw sewage.

Each pump is constructed of rugged, corrosion resistant cast iron with a cast iron non clog vortex impeller which allows the pumps to pass water and 3" spherical solids. The volute also features a powder-coated epoxy finish. These pumps are hermetically sealed to be water and dust tight. The closed coupled motor is also hermetically sealed, oil filled, and is thermally protected with an automatic reset.

All pumps listed below have a 4" horizontal ANSI flanged discharge and include a 20 ft. power cord (except the 405-00010 which includes a 25 ft. cord).

Zoeller 400 Series Sewage Pumps

Model Comparison Chart

Model Discharge HP Volts Phase GPM Head Type Float Seal
404-0004 4" Flange 2 230 1 300 33' Manual N/A Single
404-0010 4" Flange 2 230 1 300 33' Auto Variable Single
404-0006 4" Flange 2 460 3 300 33' Manual N/A Single
4404-0004 4" Flange 2 230 1 300 33' Manual N/A Double
4404-0010 4" Flange 2 230 1 300 33' Auto Variable Double
405-0004 4" Flange 3 230 1 361 38' Manual N/A Single
4404-0017 4" Flange 2 460 3 300 33' Manual N/A Double
405-0023 4" Flange 3 230 1 361 38' Auto Variable Single
405-0010 4" Flange 3 200-208 1 361 38' Manual N/A Single
405-0009 4" Flange 3 460 3 361 38' Manual N/A Single
4405-0004 4" Flange 3 230 1 355 38' Manual N/A Double
4405-0023 4" Flange 3 230 1 361 38' Manual N/A Double
4405-0024 4" Flange 3 230 1 361 38' Auto Variable Double
Performance Curve

TECHNICAL BROCHURES
Zoeller 400 Series Brochure
 
 
MANUALS
Zoeller 400 Series Instruction Manual
 
 
PARTS LISTS
Zoeller 400 Series Repair Parts List
 
 
SPECIFICATIONS
N/A
 
 

Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800.

Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order

Inspector Pumphead & Our Customer Service Representatives Are Available

Mon-Fri 7:30 am to 5:00 pm EST

Call Toll Free: 800-429-0800

"Ask Inspector PumpHead"

*Note: Picture is illustrative and may not reflect the actual product.*