Zoeller 4282-0004, Model E4282, Waste-Mate 280 Series, Sewage Pump, 1/2 Hp, 230 Volts, 1 Phase, 2" Flanged Discharge, 125 GPM Max, 25 ft Max Head, 15 ft Cord, Manual, Double Seal
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Zoeller Model E4282 Submersible Pump
The "Waste-Mate" series of submersible pumps is designed for use in residential or light commercial dewatering and wastewater applications and can be used to transfer groundwater and effluent or unscreened raw sewage. The innovative vortex impeller design reduces the risk of clogging and allows each pump to pass a 50 mm (2") spherical solid. These durable cast iron pumps include a powder coated epoxy finish to prevent corrosion, and are designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance.
Features
- Durable cast iron constructed switch case, motor and pump housing, base and impeller
- No sheet metal parts to rust or corrode
- All cast iron class 25-30 25000# tensile strength
- Stainless steel screws, bolts, float rod, handle, guard and arm and seal assembly
- Shaft seal - Carbon and ceramic rotary face seal, with stainless steel wetted parts
- Upper sleeve bearing and lower ball bearing running in bath of oil
- Maximum temperature for sewage or dewatering 130°F (54°C)
- Oil-filled, hermetically sealed, automatic reset thermal overload protected motor (1 Ph and Auto 3 Ph)
- Cast iron non-clogging vortex impeller
- 2" flanged vertical discharge (3" optional)
- All models pass 2" spherical solids
- Automatic units available with float operated, submersible (NEMA 6) mechanical switch (1 and 3 phase units)
- Corrosion resistant powder coated epoxy finish
- On point: 15-1/4"
- Off point: 5-1/4"
- Reserve powered design. For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.
Double Seal Features:
- Protects motor from leaks
- Improved bearing lubrication
- Helps eliminate seal and bearing damage from dry runs
Parts List, Model 284 (H, I, J, F, G, BA) 60 Hz.pdf
Parts List, Model 282 (H, I, J, F, G, BA) 60 Hz.pdf
Installation Instructions, One-Year Warranty 60 Hz.pdf
Technical Data, 280 Series 60 Hz.pdf
Part List, Model 282 (CF) 60 Hz.pdf
Parts List, Model 284 (D, E) 60 Hz.pdf
Parts List, Model 284 (CF) 60 Hz.pdf
Brand | Zoeller |
Mfg. Number | 4282-0004 |
Model | E4282 |
Series | Waste-Mate 280 |
Product Type | Sewage Pump |
Application | Sewage/Dewatering |
Operation | Manual |
Horsepower | 1/2 Hp |
Voltage | 230 Volts |
Phase | 1 |
Frequency | 60 Hz |
Speed | 1750 RPM |
Impeller Type | Non-clogging vortex |
Pump Housing Material | Cast iron |
Discharge Connection | 2" flanged vertical |
Impeller Material | Cast iron |
Seal Type | Double |
Maximum Flow | 125 GPM |
Maximum Head | 25 ft |
Maximum Solids Handling | 2" |
Cord Length | 15 ft |
Maximum Fluid Temperature | 130°F |
Pump Products is now carrying the Zoeller 280 and the Zoeller 4280 series submersible sewage pumps. These Zoeller 280 series pumps feature a single seal, while the Zoeller 4280 pumps contain a double seal.
Both pump series are designed to move wastewater (unscreened raw sewage) in residential or commercial applications and can also be used for dewatering and effluent transport applications. Each pump volute, motor housing, switch case and impeller is made of rugged cast iron, with no sheet metal parts susceptible to rust. The volute has an epoxy coated powder finish. The impeller is fashioned in a vortex design to prevent clogging. Screws bolts, handle and seal assembly are all stainless steel. The shaft seal is made of rotary carbon and ceramic seal faces. All pumps can pass 2" solids.
Note: All models listed below have a 2" flanged discharge, with the exception of the 382-0002 model which has a 3" flanged discharge.
Zoeller 280/4280 Series "Waste-Mate" Sewage Pumps |
Model Comparison Chart
Model | HP | Volts | Phase | GPM | Head | Seal | Cord | Operation | Float |
382-0002 | 1/2 | 115 | 1 | 125 | 25' | Single | 15' | Manual | N/A |
282-0002 | 1/2 | 115 | 1 | 127 | 26' | Single | 15' | Manual | N/A |
282-0034 | 1/2 | 115 | 1 | 125 | 25' | Single | 10' | Auto | Variable |
282-0004 | 1/2 | 230 | 1 | 127 | 26' | Single | 15' | Manual | N/A |
282-0001 | 1/2 | 115 | 1 | 125 | 25' | Single | 10' | Auto | Mechanical |
282-0025 | 1/2 | 208 | 1 | 127 | 25' | Single | 15' | Manual | N/A |
282-0035 | 1/2 | 230 | 1 | 125 | 25' | Single | 15' | Auto | Variable Level |
4282-0002 | 1/2 | 115 | 1 | 125 | 25' | Double | 15' | Manual | N/A |
282-0003 | 1/2 | 230 | 1 | 125 | 25' | Single | 10' | Auto | Mechanical |
282-0013 | 1/2 | 230 | 3 | 127 | 26' | Single | 15' | Manual | N/A |
282-0006 | 1/2 | 200 | 3 | 127 | 26' | Single | 15' | Manual | N/A |
282-0024 | 1/2 | 460 | 3 | 127 | 26' | Single | 15' | Manual | N/A |
284-0004 | 1 | 230 | 1 | 179 | 35' | Single | 15' | Manual | N/A |
284-0037 | 1 | 230 | 1 | 179 | 35' | Single | 10' | Auto | Variable Level |
284-0010 | 1 | 208 | 1 | 179 | 35' | Single | 15' | Manual | N/A |
4282-0004 | 1/2 | 230 | 1 | 125 | 25' | Double | 15' | Manual | N/A |
284-0003 | 1 | 230 | 1 | 175 | 35' | Single | 10' | Auto | Mechanical |
284-0006 | 1/2 | 460 | 3 | 179 | 35' | Single | 15' | Manual | N/A |
284-0011 | 1 | 230 | 3 | 179 | 35' | Single | 15' | Manual | N/A |
284-0015 | 1 | 200 | 3 | 179 | 35' | Single | 15' | Manual | N/A |
4284-0004 | 1 | 230 | 1 | 179 | 35' | Double | 15' | Manual | N/A |
282-0056 | 1/2 | 230 | 3 | 125 | 25' | Single | 10' | Auto | Mechanical |
284-0059 | 1 | 230 | 3 | 175 | 35' | Single | 10' | Auto | Mechanical |
Performance Curve |
TECHNICAL BROCHURES |
Zoeller 280/4280 Series "Waste-Mate" Sewage Pump Brochure |
INSTRUCTIONS |
Zoeller 280/4280 Series "Waste-Mate" Sewage Pump Installation Instructions |
PARTS LISTS |
Zoeller 280/4280 Series "Waste-Mate" Sewage Pump Repair Parts List |
SPECIFICATIONS |
Zoeller 280/4280 Series "Waste-Mate" Sewage Pump Repair Parts List |
IMAGES |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*