Zoeller 4293-0004, Model E4293, Waste-Mate 290 Series, High Head Sewage Pump, 1 HP, 230 Volts, 1 Phase, 2" NPT Flanged Discharge, 118 GPM Max, 50 ft Max Head, 20 ft Cord, Manual, Double Seal
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Zoeller 290 Series Sewage & Dewatering Pump
Zoeller 290 Series High head waste-mate submersible sewage or dewatering pump. This pump has 2 in. NPT discharge which passes 2 in. spherical solids.
Note: Model 293 should not be subjected to less than 15 feet TDH.
Features
- Durable cast iron constructed switch case, base, motor and pump housing
- No sheet metal parts to rust or corrode
- All cast iron class 25-30 25000# tensile strength
- Stainless steel screws, bolts, float rod, handle, guard, arm and seal assembly
- Oil-filled, hermetically sealed, automatic reset thermal overload protected (1 Ph only) motor
- Bronze class 84-8-0-4, non-clogging vortex impeller
- Maximum temperature for sewage or dewatering 130°F (54°C), 120°F (49°C) for WD295
- If over 130°F (54°C), consult factory
- Shaft seal - stainless steel carbon & ceramic rotary
- Corrosion resistant powder coated epoxy finish
- Upper sleeve bearing and lower ball bearing running in bath of oil
- Neoprene square ring & gasket
- All models pass 2" spherical solids
- Automatic units available with float operated, submersible (NEMA 6)2-pole mechanical switch
- On point: 14-3/4"
- Off point: 5"
- 2" NPT female flanged vertical discharge (3" Optional)
- 100% computerized tested
- Reserve powered design. For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.
Brand | Zoeller |
Mfg. Number | 4293-0004 |
Model | E4293 |
Series | Waste-Mate 290 |
Product Type | Sewage pump |
Application | Sewage/Dewatering pump |
Operation | Manual |
Horsepower | 1 Hp |
Voltage | 230 Volts |
Phase | 1 |
Frequency | 60 Hz |
Speed | 3450 RPM |
Impeller Type | Non-clogging vortex |
Pump Housing Material | Cast iron |
Discharge Connection | 2" NPT flanged vertical |
Impeller Material | Cast iron |
Seal Type | Double |
Maximum Flow | 118 GPM |
Maximum Head | 50 ft |
Maximum Solids Handling | 3" |
Cord Length | 20 ft |
Maximum Fluid Temperature | 130°F |
Pump Products is now carrying the Zoeller 290 series "Waste-Mate" sewage pumps. The Zoeller 290 series is similar to other pumps in the "Waste-Mate" family but are specifically designed for high head wastewater applications. These pumps can perform well in residential or light commercial settings and can also transfer groundwater and effluent.
Like all Zoeller pumps, the Zoeller 290 series pumps are constructed for durability and long lasting trouble-free performance. Each pump features a cast iron volute, base, motor and switch case with a corrosion resistant powder coated epoxy finish. Sheet metal parts, which are susceptible to rust, are not included in the construction. Impellers are bronze and of a non clog vortex design. The shaft seal is made of an stainless steel carbon with a ceramic rotary. The motor is oil-filled, hermetically sealed and thermally protected with an automatic reset. The Zoeller 290 pumps can withstand a maximum temperature of 130° F when submerged.
Automatic and manual models are available. Automatic models can include either a mechanical pole or a variable level float switch; manual models must be run with a control panel. Check model specific listings for compatible panels.
Zoeller 290 Series Sewage Pumps |
Model Comparison Chart
Model | HP | Volts | Phase | GPM | Head | Type | Float | Cord | Seal |
292-0002 | 1/2 | 115 | 1 | 135 | 40' | Manual | N/A | 20' | Single |
292-0014 | 1/2 | 115 | 1 | 140 | 42' | Auto | Mechanical | 20' | Single |
292-0004 | 1/2 | 230 | 1 | 135 | 40' | Manual | N/A | 20' | Single |
292-0001 | 1/2 | 115 | 1 | 140 | 42' | Auto | Mechanical | 20' | Single |
293-0004 | 1 | 230 | 1 | 122 | 51' | Manual | N/A | 20' | Single |
393-0004 | 1 | 230 | 1 | 122 | 51' | Manual | N/A | 20' | Single |
293-0029 | 1 | 230 | 1 | 118 | 50' | Auto | Variable | 20' | Single |
293-0009 | 1 | 200 | 1 | 122 | 51' | Manual | N/A | 20' | Single |
292-0003 | 1/2 | 230 | 1 | 140 | 42' | Auto | Mechanical | 20' | Single |
292-0043 | 1/2 | 200-208 | 3 | 135 | 40' | Manual | N/A | 20' | Single |
292-0044 | 1/2 | 230 | 3 | 135 | 40' | Manual | N/A | 20' | Single |
392-0016 | 1/2 | 200-208 | 3 | 135 | 40' | Manual | N/A | 20' | Single |
4292-0002 | 1/2 | 115 | 1 | 140 | 42' | Manual | N/A | 20' | Double |
293-0003 | 1/2 | 230 | 1 | 118 | 50' | Auto | Mechanical | 20' | Single |
293-0006 | 1 | 200 | 3 | 122 | 51' | Manual | N/A | 20' | Single |
293-0014 | 1 | 460 | 3 | 122 | 51' | Manual | N/A | 20' | Single |
293-0011 | 1/2 | 230 | 3 | 118 | 50' | Manual | N/A | 20' | Single |
4292-0004 | 1 | 230 | 1 | 140 | 42' | Manual | N/A | 20' | Double |
294-0004 | 1.5 | 230 | 1 | 196 | 62' | Manual | N/A | 20' | Single |
394-0004 | 1.5 | 230 | 1 | 196 | 62' | Manual | N/A | 20' | Single |
4293-0004 | 1 | 230 | 1 | 118 | 59' | Manual | N/A | 20' | Double |
295-0004 | 2 | 230 | 1 | 214 | 75' | Manual | N/A | 20' | Single |
294-0026 | 1.5 | 200-208 | 1 | 196 | 62' | Manual | N/A | 25' | Single |
4292-0014 | 1/2 | 460 | 3 | 140 | 42' | Manual | N/A | 20' | Double |
4292-0013 | 1/2 | 230 | 3 | 140 | 42' | Manual | N/A | 20' | Double |
4292-0012 | 1/2 | 200-208 | 3 | 140 | 42' | Manual | N/A | 20' | Double |
294-0003 | 1.5 | 230 | 1 | 195 | 62' | Auto | Mechanical | 20' | Single |
295-0018 | 2 | 200-208 | 1 | 214 | 75' | Manual | N/A | 25' | Single |
294-0021 | 1.5 | 230 | 1 | 195 | 62' | Auto | Mechanical | 20' | Single |
294-0006 | 1.5 | 230 | 3 | 196 | 62' | Manual | N/A | 20' | Single |
294-0005 | 1.5 | 460 | 3 | 195 | 62' | Manual | N/A | 20' | Single |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An OrderInspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST Call Toll Free: 800-429-0800
"Ask Inspector PumpHead"
*Note: Picture is illustrative and may not reflect the actual product.* |