Zoeller 4404-0004, Model E4404, Waste-Mate 400 Series, Sewage Pump, 2 HP, 230 Volts, 1 Phase, 4" Flanged Discharge, 300 GPM Max, 33 ft Max Head, 20 ft Cord, Manual, Double Seal
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
- Cast iron casting, class 25-30 25000# tensile strength
- Oil filled, hermetically sealed, automatic reset thermal overload protected (1 Ph only) motor
- Upper and lower ball bearing running in bath of oil
- Mechanical shaft seal - carbon and ceramic rotary face seal, with stainless steel wetted parts
- Stainless steel screws, bolts, washers and lifting bracket
- Neoprene square ring & gasket
- Maximum temperature: 130°F (54°C) standard
- Variable level controls available
- 4” horizontal flanged discharge, standard ANSI flange
- Passes 3” (76mm) spherical solids
- Corrosion-resistant, powder-coated epoxy finish
- Non-automatic available
Brand | Zoeller |
Mfg. Number | 4404-0004 |
Model | E4404 |
Series | Waste-Mate 400 |
Product Type | Sewage pump |
Application | Sewage/Dewatering pump |
Operation | Manual |
Horsepower | 2 HP |
Voltage | 230 Volts |
Phase | 1 |
Frequency | 60 Hz |
Speed | 1725 RPM |
Impeller Type | Non-clogging vortex |
Pump Housing Material | Cast iron |
Discharge Connection | 4" flange horizontal |
Impeller Material | Cast iron |
Seal Type | Double |
Maximum Flow | 300 GPM |
Maximum Head | 33 ft |
Maximum Solids Handling | 3" |
Cord Length | 20 ft |
Maximum Fluid Temperature | 130°F |
Pump Products is now distributing the Zoeller 400 series "Waste-Mate" sewage pumps. These submersible sewage pumps are built for wastewater applications in residential or commercial settings. These Waste-Mate pumps can also transport groundwater as well as effluent. Typical uses for such pumps include removing water from parking lots, flooded areas and in areas full of unscreened raw sewage.
Each pump is constructed of rugged, corrosion resistant cast iron with a cast iron non clog vortex impeller which allows the pumps to pass water and 3" spherical solids. The volute also features a powder-coated epoxy finish. These pumps are hermetically sealed to be water and dust tight. The closed coupled motor is also hermetically sealed, oil filled, and is thermally protected with an automatic reset.
All pumps listed below have a 4" horizontal ANSI flanged discharge and include a 20 ft. power cord (except the 405-00010 which includes a 25 ft. cord).
Zoeller 400 Series Sewage Pumps |
Model Comparison Chart
Model | Discharge | HP | Volts | Phase | GPM | Head | Type | Float | Seal |
404-0004 | 4" Flange | 2 | 230 | 1 | 300 | 33' | Manual | N/A | Single |
404-0010 | 4" Flange | 2 | 230 | 1 | 300 | 33' | Auto | Variable | Single |
404-0006 | 4" Flange | 2 | 460 | 3 | 300 | 33' | Manual | N/A | Single |
4404-0004 | 4" Flange | 2 | 230 | 1 | 300 | 33' | Manual | N/A | Double |
4404-0010 | 4" Flange | 2 | 230 | 1 | 300 | 33' | Auto | Variable | Double |
405-0004 | 4" Flange | 3 | 230 | 1 | 361 | 38' | Manual | N/A | Single |
4404-0017 | 4" Flange | 2 | 460 | 3 | 300 | 33' | Manual | N/A | Double |
405-0023 | 4" Flange | 3 | 230 | 1 | 361 | 38' | Auto | Variable | Single |
405-0010 | 4" Flange | 3 | 200-208 | 1 | 361 | 38' | Manual | N/A | Single |
405-0009 | 4" Flange | 3 | 460 | 3 | 361 | 38' | Manual | N/A | Single |
4405-0004 | 4" Flange | 3 | 230 | 1 | 355 | 38' | Manual | N/A | Double |
4405-0023 | 4" Flange | 3 | 230 | 1 | 361 | 38' | Manual | N/A | Double |
4405-0024 | 4" Flange | 3 | 230 | 1 | 361 | 38' | Auto | Variable | Double |
Performance Curve |
TECHNICAL BROCHURES |
Zoeller 400 Series Brochure |
MANUALS |
Zoeller 400 Series Instruction Manual |
PARTS LISTS |
Zoeller 400 Series Repair Parts List |
SPECIFICATIONS |
N/A |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*