Zoeller GX404 Explosion Proof Sewage Pump | PumpProducts.com
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Zoeller G4404 Series Sewage & Dewatering Pump
This high capacity, double seal, "Waste-Mate" submersible pump is designed for high capacity water removal, parking lots, low-flood areas, and water transfer.
Features
- Cast iron casting, class 25-30 25000# tensile strength
- Upper and lower ball bearing running in bath of oil
- Impeller: non-clogging vortex
- Mechanical shaft seal - carbon and ceramic rotary face seal, with stainless steel wetted parts
- Stainless steel screws, bolts, washers, lifting bracket
- Neoprene square ring and gasket
- Temperature to 130°F (54°C)
- Variable level controls available
- 4" horizontal flanged discharge - standard ANSI flange
- Passes 3" spherical solids
- Corrosion-resistant powder coated epoxy finish
- Double seal protects motor from seal leaks, improved seal lubrication, helps eliminate seal and bearing damage from dry runs
- Major width 16-1/8"
- Major height 27-1/2"
Brand | Zoeller |
Mfg. Number | 4404-0017 |
Model | G4404 |
Series | Waste-Mate 400 |
Product Type | Sewage pump |
Application | Sewage/Dewatering pump |
Operation | Manual |
Horsepower | 2 HP |
Voltage | 460 Volts |
Phase | 3 |
Frequency | 60 Hz |
Speed | 1725 RPM |
Impeller Type | Non-clogging vortex |
Pump Housing Material | Cast iron |
Discharge Connection | 4" flange horizontal |
Impeller Material | Cast iron |
Seal Type | Double |
Maximum Flow | 300 GPM |
Maximum Head | 33 ft |
Maximum Solids Handling | 3" |
Cord Length | 35 ft |
Maximum Fluid Temperature | 130°F |
Pump Products is now distributing the Zoeller 400 series "Waste-Mate" sewage pumps. These submersible sewage pumps are built for wastewater applications in residential or commercial settings. These Waste-Mate pumps can also transport groundwater as well as effluent. Typical uses for such pumps include removing water from parking lots, flooded areas and in areas full of unscreened raw sewage.
Each pump is constructed of rugged, corrosion resistant cast iron with a cast iron non clog vortex impeller which allows the pumps to pass water and 3" spherical solids. The volute also features a powder-coated epoxy finish. These pumps are hermetically sealed to be water and dust tight. The closed coupled motor is also hermetically sealed, oil filled, and is thermally protected with an automatic reset.
All pumps listed below have a 4" horizontal ANSI flanged discharge and include a 20 ft. power cord (except the 405-00010 which includes a 25 ft. cord).
Zoeller 400 Series Sewage Pumps |
Model Comparison Chart
Model | Discharge | HP | Volts | Phase | GPM | Head | Type | Float | Seal |
404-0004 | 4" Flange | 2 | 230 | 1 | 300 | 33' | Manual | N/A | Single |
404-0010 | 4" Flange | 2 | 230 | 1 | 300 | 33' | Auto | Variable | Single |
404-0006 | 4" Flange | 2 | 460 | 3 | 300 | 33' | Manual | N/A | Single |
4404-0004 | 4" Flange | 2 | 230 | 1 | 300 | 33' | Manual | N/A | Double |
4404-0010 | 4" Flange | 2 | 230 | 1 | 300 | 33' | Auto | Variable | Double |
405-0004 | 4" Flange | 3 | 230 | 1 | 361 | 38' | Manual | N/A | Single |
4404-0017 | 4" Flange | 2 | 460 | 3 | 300 | 33' | Manual | N/A | Double |
405-0023 | 4" Flange | 3 | 230 | 1 | 361 | 38' | Auto | Variable | Single |
405-0010 | 4" Flange | 3 | 200-208 | 1 | 361 | 38' | Manual | N/A | Single |
405-0009 | 4" Flange | 3 | 460 | 3 | 361 | 38' | Manual | N/A | Single |
4405-0004 | 4" Flange | 3 | 230 | 1 | 355 | 38' | Manual | N/A | Double |
4405-0023 | 4" Flange | 3 | 230 | 1 | 361 | 38' | Manual | N/A | Double |
4405-0024 | 4" Flange | 3 | 230 | 1 | 361 | 38' | Auto | Variable | Double |
Performance Curve |
TECHNICAL BROCHURES |
Zoeller 400 Series Brochure |
MANUALS |
Zoeller 400 Series Instruction Manual |
PARTS LISTS |
Zoeller 400 Series Repair Parts List |
SPECIFICATIONS |
N/A |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*