Zoeller 4405-0024, Model WD4405, Waste-Mate 400 Series, Sewage Pump with Variable Level Float Switch, 3 HP, 230 Volts, 1 Phase, 4" Flanged Discharge, 361 GPM Max, 38 ft Max Head, 20 ft Cord, Automatic, Double Seal
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Zoeller 400 Series Sewage & Dewatering Pump
This "Waste-Mate" double seal pump is designed for high capacity water removal, parking lots, low-flood areas, and water transfer.
- Cast iron casting
- Stainless steel motor shaft
- Oil filled, hermetically sealed, automatic reset thermal overload protected (1 Ph only) motor
- Upper and lower ball bearing running in bath of oil
- Protects motor from seal leaks, improves seal lubrication and helps eliminate seal and bearing damage from dry runs
- Mechanical shaft seal - carbon and ceramic rotary face seal, with stainless steel wetted parts
- Stainless steel screws, bolts, washers and lifting bracket
- Neoprene square ring & gasket
- Maximum temperature: 130°F
- 4" horizontal flanged discharge, standard ANSI flange
- Passes 3" spherical solids
- Corrosion-resistant, powder-coated epoxy finish
- For unusual conditions, a reserve safety factor is engineered into the design of every Zoeller pump
- Picture represents series and may not be exact
Applications
- Retrofit on existing sewage installations
- New installations
Notes:
The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles.
Pump Products is now distributing the Zoeller 400 series "Waste-Mate" sewage pumps. These submersible sewage pumps are built for wastewater applications in residential or commercial settings. These Waste-Mate pumps can also transport groundwater as well as effluent. Typical uses for such pumps include removing water from parking lots, flooded areas and in areas full of unscreened raw sewage.
Each pump is constructed of rugged, corrosion resistant cast iron with a cast iron non clog vortex impeller which allows the pumps to pass water and 3" spherical solids. The volute also features a powder-coated epoxy finish. These pumps are hermetically sealed to be water and dust tight. The closed coupled motor is also hermetically sealed, oil filled, and is thermally protected with an automatic reset.
All pumps listed below have a 4" horizontal ANSI flanged discharge and include a 20 ft. power cord (except the 405-00010 which includes a 25 ft. cord).
Zoeller 400 Series Sewage Pumps |
Model Comparison Chart
Model | Discharge | HP | Volts | Phase | GPM | Head | Type | Float | Seal |
404-0004 | 4" Flange | 2 | 230 | 1 | 300 | 33' | Manual | N/A | Single |
404-0010 | 4" Flange | 2 | 230 | 1 | 300 | 33' | Auto | Variable | Single |
404-0006 | 4" Flange | 2 | 460 | 3 | 300 | 33' | Manual | N/A | Single |
4404-0004 | 4" Flange | 2 | 230 | 1 | 300 | 33' | Manual | N/A | Double |
4404-0010 | 4" Flange | 2 | 230 | 1 | 300 | 33' | Auto | Variable | Double |
405-0004 | 4" Flange | 3 | 230 | 1 | 361 | 38' | Manual | N/A | Single |
4404-0017 | 4" Flange | 2 | 460 | 3 | 300 | 33' | Manual | N/A | Double |
405-0023 | 4" Flange | 3 | 230 | 1 | 361 | 38' | Auto | Variable | Single |
405-0010 | 4" Flange | 3 | 200-208 | 1 | 361 | 38' | Manual | N/A | Single |
405-0009 | 4" Flange | 3 | 460 | 3 | 361 | 38' | Manual | N/A | Single |
4405-0004 | 4" Flange | 3 | 230 | 1 | 355 | 38' | Manual | N/A | Double |
4405-0023 | 4" Flange | 3 | 230 | 1 | 361 | 38' | Manual | N/A | Double |
4405-0024 | 4" Flange | 3 | 230 | 1 | 361 | 38' | Auto | Variable | Double |
Performance Curve |
TECHNICAL BROCHURES |
Zoeller 400 Series Brochure |
MANUALS |
Zoeller 400 Series Instruction Manual |
PARTS LISTS |
Zoeller 400 Series Repair Parts List |
SPECIFICATIONS |
N/A |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*