Zoeller 55-0002, Model N55 Mighty-Mate Bronze Effluent Pump .3 HP, 115 Volts, 1 Phase, 9.7 Amps, 1-1/2" NPT Discharge, 43 GPM Max, 19.25 Max Head, 15 ft Cord, Manual
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Zoeller N55 "Mighty Mate" Dewatering and Effluent Pump
This submersible pump is designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance.
Features
- Bronze switch case, motor & pump housing
- Oil-filled, hermetically-sealed, automatic reset thermal overload protected motor
- Upper and lower sleeve bearings running in bath of oil
- Engineered thermoplastic base
- Engineered, glass-filled, plastic impeller with metal insert
- Watertight, neoprene square ring between motor and pump housing
- Permanently oiled bearing
- No screens to clog
- Stainless steel guard & handle
- Bearing - lower & upper oil fed bronze
- Carbon and ceramic shaft seal
- On point: 7-1/4”
- Off point: 3”
- Passes 1/2" spherical solids
- 1-1/2" NPT discharge
- Maximum temperature for effluent or dewatering: 130 °
- 15 ft, UL listed, 3-wire cord and plug
- Entire unit pressure-tested after assembly
- Watertight, dust-tight as well as submersible
Control Panel Options
Below are the control panels that can be used with this pump:
Note: Image is illustrative and may not reflect details of actual product.
Pump Products is now distributing the Zoeller 50 series "Mighty-Mate" submersible effluent or sump pumps. These pumps are built for a wide variety of residential or light commercial effluent applications and can also be used to transport groundwater and general dewatering applications.
The Zoeller 53 and Zoeller 57 series pumps are cast iron while Zoeller 55, Zoeller 57 and Zoeller 59 series pumps are bronze. Every pump in the Mighty-Mate family is designed for corrosion resistance and can pass ½ “ solids. A non-clog vortex impeller is included in every pump.
All models listed below are single phase; manual and automatic options available.
Zoeller 50 Series Mighty-Mate Effluent Pumps |
Model Comparison Chart
Model | Discharge | HP | Voltage | GPM | Max. Head | Type | Cord | Amps |
53-0002 | 1.5" NPT | 1/3 | 115 | 43 | 19.25' | Manual | 15' | 9.7 |
53-0001 | 1.5" NPT | 1/3 | 115 | 43 | 19.25' | Auto | 9' | 9.7 |
57-0002 | 1.5" NPT | 1/3 | 115 | 43 | 19.25' | Manual | 15' | 9.7 |
53-0032 | 1.5" NPT | 1/3 | 115 | 43 | 19.25' | Auto | 9' | 9.7 |
53-0029 | 1.5" NPT | 1/3 | 115 | 43 | 19.25' | Auto | 15' | 9.7 |
53-0016 | 1.5" NPT | 1/3 | 115 | 43 | 19.25' | Auto | 25' | 9.7 |
57-0033 | 1.5" NPT | 1/3 | 115 | 43 | 19.25' | Auto | 9' | 9.7 |
53-0004 | 1.5" NPT | 1/3 | 230 | 43 | 19.25' | Manual | 15' | 4.8 |
53-0003 | 1.5" NPT | 1/3 | 230 | 43 | 19.25' | Auto | 9' | 4.8 |
57-0004 | 1.5" NPT | 1/3 | 230 | 43 | 19.25' | Manual | 15' | 4.8 |
57-0001 | 1.5" NPT | 1/3 | 115 | 43 | 19.25' | Auto | 9' | 9.7 |
57-0003 | 1.5" NPT | 1/3 | 230 | 43 | 19.25' | Auto | 9' | 4.8 |
57-0045 | 1.5" NPT | 1/3 | 230 | 43 | 19.25' | Auto | 15' | 4.8 |
55-0002 | 1.5" NPT | 1/3 | 115 | 43 | 19.25' | Manual | 15' | 9.7 |
59-0002 | 1.5" NPT | 1/3 | 115 | 43 | 19.25' | Manual | 15' | 9.7 |
59-0001 | 1.5" NPT | 1/3 | 115 | 43 | 19.25' | Auto | 9' | 9.7 |
59-0004 | 1.5" NPT | 1/3 | 230 | 43 | 19.25' | Manual | 15' | 4.8 |
59-0003 | 1.5" NPT | 1/3 | 230 | 43 | 19.25' | Auto | 9' | 4.8 |
Performance Curve |
Dimensions |
TECHNICAL BROCHURES |
Zoeller 50 Series Brochure |
MANUALS |
N/A |
PARTS LISTS |
Zoeller 53 Series Parts List |
Zoeller 55 Series Parts List |
Zoeller 57 Series Parts List |
Zoeller 59 Series Parts List |
SPECIFICATIONS |
Zoeller 50 Series Specifications Sheet |
IMAGES |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*