Zoeller 611-0007, Model J611, Sewage Waste 600 Series, Sewage Pump, 1 HP, 200 Volts, 3 Phase, 4.8 Amps, 4" Flanged Discharge, 250 GPM Max, 22 ft Max Head, 25 ft Cord, Manual, Double Seal
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Zoeller J611 Sewage Pump
The "Sewage-Waste" series of submersible pumps is designed for use in commercial dewatering and wastewater applications and can be used to transfer wastewater or unscreened raw sewage. The semi-open reversing impeller design reduces the risk of clogging and allows each pump to pass 2-1/2 inch spherical solids. This durable cast iron pump includes a powder coated
epoxy finish to prevent corrosion, and is designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance!
Features
- Class 30 cast iron construction
- Double seal for extra motor protection
- Corrosion-resistant, powder coated epoxy finish
- Stainless steel screws, washers, tag and seal assembly
- 1 phase – capacitor start, capacitor run
- Oil-filled, hermetically-sealed motor with heavy-duty, finned motor housing for added heat dissipation
- Continuous duty operation in submerged conditions
- Maximum temperature for sewage or dewatering: 104 °F (40 °C) with 1.2 service factor
- 416 stainless steel motor shaft
- Stainless steel fitted tandem shaft seals, carbon/ceramic seal faces
- Over-sized upper and lower ball bearings running in an oil bath
- Buna N square rings and seals used throughout
- 2-1/2" (63 mm) spherical solids handling
- 4" horizontal flanged discharge
- 100% computerized tested
- Major width: 17-9/16" (44.6 cm)
- Major height: 29-1/4" (74.3 cm)
- Non-automatic for variable level control systems
- Patent No. 6,364,620
Control Panel Options
Below are the control panels that can be used with this pump:
Pump Products is now carrying the Zoeller 600 series submersible sewage pumps, also known as the the "Sewage-Waste" series. These Zoeller pumps are heavy duty high capacity pumps designed for use in commercial wastewater application settings. Each pump is built to handle wastewater, unscreened raw sewage or general dewatering applications. In this Zoeller 600 series, there are pump models with either a horizontal or vertical discharge for configuration convenience. All models can pass 2 ½” solids.
These pumps are impressively constructed with with a class 30 epoxy-coated cast iron casing for durability and corrosion resistance. The impeller is an dual vane semi-open ductile iron to reduce clogging. Various parts such as the screws, washers, tag, seal assembly and steel shaft are stainless steel. Each pump is double seal protected.
The motor is hermetically sealed and oil-filled and has a finned housing for superior heat dissipation. These pumps are built for continuous duty and even has a submerged operation in up to 104° F water.
All models listed below are manually operated and include a 25 ft. power cord.
Zoeller 600 Series "Sewage Waste" Sewage Pumps |
Model Comparison Chart
Model | Discharge | HP | Voltage | Phase | GPM | Max. Head | Amps |
611-0007 | 4" Fl. Horiz. | 1 | 200 | 3 | 250 | 22' | 4.8 |
611-0009 | 4" Fl. Horiz. | 1 | 230 | 3 | 250 | 22' | 4.2 |
611-0008 | 3" Vert. | 1 | 230 | 3 | 250 | 22' | 4.2 |
621-0009 | 4" Fl. Horiz. | 1.5 | 230 | 3 | 320 | 29' | 5.1 |
621-0008 | 3" Vert. | 1.5 | 230 | 3 | 320 | 29' | 5.1 |
631-0008 | 3" Vert. | 2 | 230 | 3 | 390 | 34' | 6.8 |
631-0009 | 4" Horiz. | 2 | 230 | 3 | 390 | 34' | 6.8 |
641-0008 | 3" Vert. | 3 | 230 | 3 | 460 | 44' | 9.6 |
641-0009 | 4" Horiz. | 3 | 230 | 3 | 460 | 44' | 9.6 |
651-0009 | 4" Horiz. | 5 | 230 | 3 | 533 | 54' | 15.2 |
651-0008 | 3" Vert. | 5 | 230 | 3 | 533 | 54' | 15.2 |
651-0006 | 3" Vert. | 5 | 200 | 3 | 533 | 54' | 15.2 |
661-0009 | 4" Horiz. | 7.5 | 230 | 3 | 600 | 65' | 22.0 |
661-0006 | 3" Vert. | 7.5 | 200 | 3 | 600 | 65' | 22.0 |
661-0008 | 3" Vert. | 7.5 | 230 | 3 | 600 | 65' | 22.0 |
Performance Curve |
Diagram |
TECHNICAL BROCHURES |
Zoeller 600 Series Brochure |
MANUALS |
Zoeller 600 Series Owner's Manual |
PARTS LISTS |
Zoeller 600 Series Repair Parts List |
SPECIFICATIONS |
Zoeller 600 Series Specifications Sheet |
Zoeller 600 Series Guide Specifications |
TECHNICAL DATA |
Zoeller 600 Series Technical Data Sheet |
IMAGES |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*