Zoeller 915-0005, Simplex Grinder Basin Package, with Shark Model 803 Grinder Pump, (18" x 30") Poly Molded Basin, Piggyback Switch, Alarm, 1/2 HP, 115 Volts, 1 Phase, 1-1/4" Discharge, 32 GPM Max, 26 ft Max Head, 15 ft Cord, Automatic

SKU #: 915-0005
Brand: Zoeller
Available For Order! ((Usually Ships 3-5 Days))This product  is direct shipped from the manufacturer. The estimated shipping time may vary depending on the manufacturers stock, backlog or delay. If you would like to confirm the manufacturers lead time for this item, call our Pump Products sales team at 800-429-0800 between the hours of 7:30 A.M. - 4:30 P.M. E.S.T.
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
$2,122.39
Call Sales Counter !
Order By Phone
Calculate Shipping Ship Weight (60.00 lbs)

FEATURES

Zoeller 915 Preassembled Simplex Sewage Package

This complete and job ready grinder package is for indoor use in residential wastewater applications or 2" sewage ejector retrofits. 

Package includes

  • Automatic grinder pump model BN800
  • 18" x 30" poly molded basin
  • Steel cover with 2" vent, 1-1/4" discharge and stainless steel bolt kit
  • 1-1/4" check valve with unions
  • All internal PVC piping factory installed
  • Preset float switch and alarm model 10-1494

Package Features

  • Automatic, 1/2 HP Shark grinder pump
  • 18" x 30" polyethylene molded basin with simplex steel cover
  • On: 13-3/8" , Off: 6-1/2"
  • 4" predrilled inlet
  • IBAD - Integral Baffling and Deflection System allows solids up to 4" to enter the basin without becoming lodged; minimizes potential float obstruction
  • Basin Scouring System automatically agitates standing liquid to prevent grease and sludge build up. Engineered for the life of the system; no moving parts to wear out

Pump BN800 Features

  • Automatic, 1/2 HP, 115 Volts, 60 Hz
  • Tri-Slice cutter technology - three independent cutting channels provide over 250,000 cuts/minute
  • Grinds flushable wipes, sanitary napkins, disposable and cloth diapers
  • Stainless steel cutter and plate
  • 15 ft power cord
  • 26 ft shut-off head
  • Stainless braided lift handle standard
  • 1-1/4" NPT discharge can be adapted to existing 2" piping systems
  • Automatic thermal overload
  • Maximum operating temperature 130°F
  • Cast iron motor housing and pump housing provides heat dissipation for extended life cycle and durability
  • Small footprint and practical pumping cycle eliminates concerns about short cycling and premature pump failure
  • Internal start components so no control panel needed
  • Upper and lower bearings provide smooth operation and durability in the harshest environments
  • Single piggyback switch

Note:  For 2" sewage ejector retrofit, simply remove and discard basin. Cover and suspended grinder pump will drop into existing basin. Cover may require field alignment to support reduced debris build up.

Please see the manuals for specifications on this item

This complete and job ready grinder package is for indoor use in residential wastewater applications or 2" sewage ejector retrofits.

The 915 is the industry’s only 115 volt, 1/2 HP grinder pump that stands up to the toughest applications where traditional sewage pumps fail. This job-ready system uses Zoeller's innovative, stainless steel cutter, which requires little or no maintenance. The built-in scouring system and baffle keep debris from obstructing float operation. Small yet powerful, this efficient 7 amp pump handles most debris including: socks, denim, sanitary napkins, diapers, etc. The system is 100% preassembled for ease of installation.

  • 1/2 HP Shark grinder pump
  • All stainless steel hardware
  • UL listed, 15' (5 m) cord assembly
  • Stainless steel cutter and disc assembly
  • Cool run design with cast iron motor housing
  • 1-1/4" discharge
  • Steel 10' (3 m) stack test cover available with 2" or 3" vent and 1-1/4" discharge (10' [3 m] stack test cover available)
  • 1-1/4" check valve with unions included
  • All internal PVC piping factory installed
  • Preset float switch and alarm
  • 18" x 30" (45.7 x 76.2 cm) poly molded or fiberglass basin (On: 13-3/8" [34 cm], Off: 6-1/2" [16.5 cm])
  • 24" x 24" (61 x 61 cm) poly molded basin (On: 11" [27.9 cm], Off: 5-1/4" [38.7 cm])
  • IBAD - Integral Baffling and Deflection System® allows solids up to 4" (102 mm) to enter the basin without becoming lodged; minimizes potential float obstruction.
  • Basin Scouring System® automatically agitates standing liquid to prevent grease and sludge buildup. Engineered for the life of the system with no moving parts to wear out.
  • Remove basin for sewage ejector retrofits

Basin Specifications:

  • Poly molded basin with simplex steel cover, available in 18" x 30" or 24" x 24" (45.7 x 76.2 cm or 61 x 61 cm)
  • Fiberglass basin with simplex steel 10' (3 m) stack rated cover available in 18" x 30" (45.7 x 76.2 cm)
  • 4" (102 mm) pre-drilled inlet (18" x 30" [45.7 x 76.2 cm] includes inlet seal)
  • All covers supplied with 2" or 3" vent, 1-1/4" discharge and stainless steel bolt kit
  • Retrofits most simplex 18" x 30" and 24" x 24" (45.7 x 76.2 cm and 61 x 61 cm) ejector basins including: Topp, Jackel and Liberty 370/380
ZOELLER 915 GRINDER PUMP PACKAGE SYSTEM

Model Comparison Chart

Model Discharge (NPT) HP Voltage Power Cord GPM Max. Head
915-0010 1-1/4" 1/2 115 15' 32 26'
915-0005 1-1/4" 1/2 115 15' 32 26'
915-0008 1-1/4" 1/2 115 15' 32 26'
915-0006 1-1/4" 1/2 115 15' 32 26'
915-0009 1-1/4" 1/2 115 15' 32 26'
915-0007 1-1/4" 1/2 115 15' 32 26'
PERFORMANCE CURVES

DIMENSIONS

PARTS BREAKDOWN

SPECIFICATIONS

TDH FLOW PER MINUTE

BROCHURE
Zoeller 915 Grinder Pump Package System Brochure
INSTALLATION INSTRUCTIONS
Zoeller 915 Grinder Pump Package System Installation Instructions
CATALOGUE
Zoeller 915 Grinder Pump Package System Catalogue
SPECIFICATIONS
Zoeller 915 Grinder Pump Package System Specifications
TECHNICAL DATA
Zoeller 915 Grinder Pump Package System Technical Data

Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order

Inspector Pumphead & Our Customer Service Representatives Are Available

Mon-Fri 7:30 am to 5:00 pm EST

Call Toll Free: 800-429-0800

"Ask Inspector PumpHead"

*Note: Picture is illustrative and may not reflect the actual product.*