Zoeller 95-0001, Model M95, Flow-Mate Premium Series Sump Pump, 1/2 HP, 115 Volts, 1 Phase, 10.5 Amps, 1-1/2" NPT Discharge, 80 GPM Max, 26 ft Max Head, 15 ft Cord, Automatic
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
Call Toll Free: 800-429-0800
FEATURES
Zoeller M95 Premium Series Sump Pump
This "Flow-Mate" model submersible pump is designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent. This durable cast iron pump includes a powder coated epoxy finish to prevent corrosion and is designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance.
Features
- Corrosion-resistant, powder coated epoxy finish
- Durable, cast iron switch case, motor, pump housing and base
- Viton outer switch boot
- Float-operated, submersible, 2-pole mechanical switch integrating advanced switch technology
- Permanent split capacitor motor, oil-filled and hermetically-sealed, automatic reset thermal overload protection
- Watertight, neoprene square ring between motor and pump housing
- Bearings – upper and lower oil-fed cast iron
- Carbon and ceramic shaft seal
- No sheet metal parts to rust or corrode
- Includes a stainless steel handle for easy installation and removal
- Stainless steel screws, guard, handle, arm and seal assembly
- Maximum temperature for effluent or dewatering: 130° F
- Passes 1/2” spherical solids
- No screens to clog
- 1-1/2” NPT discharge
- On point: 9-1/2”
- Off point: 3”
- 5-year warranty
- Entire unit pressure-tested after assembly
Welcome back to Inspector Pumphead Recommends! In this feature, I will be recommending a specific pump model and highlighting the features, specifications, and benefits of this pump. It could be a new product, a best seller, a seasonally appropriate pump or one that is strongly recommended by the application engineers.
Let's dive in!
Zoeller 95-0001
Zoeller 95 Flow Mate Sump Pump
Today I am highlighting the Zoeller 95 Flow Mate sump pump. The Zoeller 95 is a submersible sump pump, designed to handle groundwater or effluent water in residential or light commercial application settings.
The Zoeller 95 is a high capacity pump that can move water with up to ½” spherical solids and is completely submersible in waters up to 130°F.
Construction
Most Zoeller 95's are made with a durable cast iron, including the switch case, volute and base. A powder coated epoxy finish is applied to the exterior for extra corrosion resistance. The finish also allows for greater heat dissipation from the motor, ensuring a long service life. There are no sheet metal parts that are susceptible to corrosion within the body of the pump and no screens to clog.
The close coupled motor is a permanent split capacitor type with a oil filled hermetically sealed Class B insulation. It operates at 60 Hz and 3450 RPM with 10.5 amps. The motor housing is also cast iron. The shaft seal is carbon and ceramic and there is a watertight neoprene square ring sealing the motor from the volute. The upper bearing is a sleeve type while the lower bearing is a ball type.
The standout feature of the Zoeller 95 pump is the 5-year warranty, a signal of how highly Zoeller thinks of the pump's quality.
Specs
| Model | Discharge | HP | Voltage | Phase | GPM | Max. Head | Cord | Mode |
| 95-0001 | 1.5" NPT | 1/2 | 115 | 1 | 80 | 26' | 15' | Auto |
Curve 
Dimensions
| LITERATURE |
| Zoeller 95 Brochure |
| Zoeller 95 Installation Instructions |
| Zoeller 95 Repair Parts List |
| Zoeller 95 Technical Data |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*
