Barnes 104876, Model SE51HT, High Temperature Sewage Pump, 1/2 HP, 120 Volts, 1 Phase, 2" NPT Flanged Discharge, 158 GPM Maximum, 25 ft Maximum Head, Manual, 15 ft Cord
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Barnes SE-HT High Temperature Sewage Pump
This is a submersible, non-clog sewage pump designed for high temperature raw sewage applications. This pump has a single seal and can handle spherical solids up to 2 inches in diameter. It has a torque curved, oil filled, squirrel cage induction motor.
Features
- 2" NPT, female, vertical, bolt-on flanged discharge
- Volute, motor housing, impeller and seal plate are cast iron
- Impeller has a 2 vane open design with pump out vanes on back side
- 416 stainless steel shaft
- Buna-N square rings
- 300 series stainless steel hardware
- Single mechanical seal design made of Carbon/Ceramic/Buna-N
- Single row, oil lubricated upper and lower ball bearings
- Upper bearing with radial load and lower bearing with radial and thrust load
Brand | Barnes |
Mfg. Number | 104876 |
Model | SE51HT |
Series | SE-HT |
Product Type | Sewage pump |
Application | High temperature raw sewage |
Horsepower | 1/2 HP |
Voltage | 120 volts |
Phase | 1 |
Frequency | 60 Hz |
Speed | 1750 RPM |
Operation | Manual |
Discharge Connection | 2" NPT, female, vertical, bolt-on flange |
Maximum Flow | 158 GPM |
Maximum Head | 25 ft |
Paint | Air dry enamel |
Motor Housing | Cast iron ASTM A-48 |
Motor Design | NEMA L |
Overload Protection | Yes |
Motor Insulation | Class F |
Shaft Material | 416 stainless steel |
Impeller Design | 2 vane open |
Impeller Material | Cast iron ASTM A-48 |
Volute Material | Cast iron ASTM A-48 |
Seal Plate | Cast iron ASTM A-48 |
NEMA Start Code | R |
Full Load Current | 17 Amps |
Locked Rotor Current | 63.8 Amps |
Cord Size | 14/3 |
Cord Type | SOW |
Liquid Temperature | 200°F |
Cord Length | 15 ft |
The Barnes SE-HT series of high temperature submersible, non-clog sewage pumps is designed to pump effluent or wastewater, nonexplosive and noncorrosive liquids. It has a solids handling capability of up 2 inches. Features
- 2" NPT, female, vertical
- Volute, motor housing, impeller and seal plate are cast iron
- Impeller has a 2 vane open design with pump out vanes on back side
- 416 stainless steel shaft
- Buna-N square rings
- 300 series stainless steel hardware
- Single mechanical seal design made of Carbon/Ceramic/Buna-N
- Single row, oil lubricated upper and lower ball bearings
BARNES SE-HT SERIES HIGH TEMPERATURE PUMPS |
Barnes SE-HT Series High Temp Pumps
Model Comparison Chart
Model | Discharge (NPT) | HP | Voltage | Phase | GPM | Max. Head |
SE411HT | 2" | 4/10 | 115 | 1 | 95 | 20' |
SE411HTA | 2" | 4/10 | 115 | 1 | 95 | 20' |
SE421HT | 2" | 4/10 | 230 | 1 | 95 | 20' |
SE51HT | 2" | 1/2 | 120 | 1 | 158 | 25' |
SE51HTA | 2" | 1/2 | 120 | 1 | 158 | 25' |
SE52HT | 2" | 1/2 | 240 | 1 | 158 | 25' |
SE51HTAU | 2" | 1/2 | 120 | 1 | 158 | 25' |
SE52HTAU | 2" | 1/2 | 240 | 1 | 158 | 25' |
PERFORMANCE |
DIMENSIONS |
SPECIFICATIONS |
REPAIR PARTS |
TROUBLESHOOTING |
SPECIFICATIONS |
Barnes SE-HT Series High Temperature Pump Specifications |
INSTALLATION MANUAL |
Barnes SE-HT Series High Temperature Pump Installation Manual |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*