Barnes 105030, Model 4SE1444DS, 4SE-DS Series, Sewage Pump, 1.4 HP, 480 Volts, 3 Phase, 4" Flanged Horizontal Discharge, 165 GPM Max, 30 ft Max Head, 30 ft Cord, Manual, Double Seal
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
Call Toll Free: 800-429-0800
FEATURES
Barnes 4SE-DS Submersible Non-Clog Sewage Pump
This is a submersible, non-clog sewage pump designed for typical raw sewage applications. This pump has a double seal and can handle spherical solids up to 2 inch in diameter. It has a torque curved, oil filled, squirrel cage induction motor.
Features
-
3" & 4", 125 lb, flange horizontal discharge
-
Volute, motor housing, and seal plate are made of cast iron ASTM A-48, Class 30
-
Impeller has a 2 vane open design with pump out vanes on back side
-
416 stainless steel shaft
-
300 series stainless steel hardware
-
Single row, ball, oil lubricated upper and lower bearings
-
Tandem mechanical seal design, made of Carbon/Ceramic/Buna-N with an oil filled reservoir
| Brand | Barnes |
| Mfg. Number | 105030 |
| Model | 4SE1444DS |
| Series | 4SE-DS |
| Product Type | Sewage pump |
| Application | Raw sewage |
| Operation | Manual |
| Horsepower | 1.4 HP |
| Voltage | 480 Volts |
| Phase | 3 |
| Frequency | 60 Hz |
| Speed | 1750 RPM |
| Max. Solid Size | 2" |
| Motor Insulation | Class F |
| Impeller Type | 2 vane, open |
| Pump Housing Material | Cast iron |
| Discharge Connection | 4" flange 12 bolt horizontal |
| Impeller Material | Cast iron |
| Seal Type | Dual |
| Maximum Flow | 165 GPM |
| Maximum Head | 30 ft |
| Paint | Air dry enamel |
| Thermal Protection | Control panel required |
| Power Cord Length | 30 ft |
| Motor Casing Material | Cast iron |
| Motor Shaft Material | 416 stainless steel |
| Shaft Seal | Carbon/Ceramic/Buna-N |
| Motor Design | NEMA B |
| Service Factor | N/A |
| Full Load Current | 2.2 Amps |
| Locked Rotor Current | 7.7 Amps |
| Max. Temperature (Continuous) | 104°F |
| Power Cord Size | 14/4 |
| Cord Type | SOW |
The Barnes 4SE-DS series of submersible, non-clog sewage pumps are designed for typical raw sewage applications. These pumps have a double seal and can handle spherical solids up to 2 inch in diameter. It has a torque curved, oil filled, squirrel cage induction motor. Barnes solids handling pumps are constructed of durable cast iron with oil-filled motors to provide a pump tough enough to meet almost any application need. Features
-
3" & 4", 125 lb, flange horizontal discharge
-
Volute, motor housing, and seal plate are made of cast iron ASTM A-48, Class 30
-
Impeller has a 2 vane open design with pump out vanes on back side
-
416 stainless steel shaft
-
300 series stainless steel hardware
-
Single row, ball, oil lubricated upper and lower bearings
-
Tandem mechanical seal design, made of Carbon/Ceramic/Buna-N with an oil filled reservoir
| BARNES 4SE-DS SERIES SEWAGE PUMPS |
Barnes 4SE-DS Series Sewage Pumps
Model Comparison Chart
| Model | Discharge (Flanged Horizontal) | HP | Voltage | Phase | GPM | Max. Head |
| 4SE914DS | 4" | 0.9 | 120 | 1 | 164 | 25' |
| 4SE924DS | 4" | 0.9 | 240 | 1 | 164 | 25' |
| 4SE1474DS | 4" | 1.4 | 200/240 | 1 | 165 | 30' |
| 4SE944DS | 4" | 0.9 | 480 | 3 | 164 | 25' |
| 4SE954DS | 4" | 0.9 | 600 | 3 | 164 | 25' |
| 4SE994DS | 4" | 0.9 | 200/240 | 3 | 164 | 25' |
| 4SE1454DS | 4" | 1.4 | 600 | 3 | 165 | 30' |
| 4SE1494DS | 4" | 1.4 | 200/240 | 3 | 165 | 30' |
| 4SE1444DS | 4" | 1.4 | 480 | 3 | 165 | 30' |
| 4SE1974DS | 4" | 1.9 | 200/240 | 1 | 220 | 38' |
| 4SE1994DS | 4" | 1.9 | 200/240 | 3 | 220 | 38' |
| 4SE1944DS | 4" | 1.9 | 480 | 3 | 220 | 38' |
| 4SE1954DS | 4" | 1.9 | 600 | 3 | 220 | 38' |
| PERFORMANCE CURVES |
| DIMENSIONS |
| SPECIFICATIONS |
| REPAIR PARTS |
| TROUBLESHOOTING |
| SPECIFICATIONS |
| Barnes 4SE-DS Series Sewage Pump Specifications |
| INSTALLATION MANUAL |
| Barnes 4SE-DS Series Sewage Pump Installation Manual |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*
