Barnes 110614, Model SGVF2002L, SGVF Series, Grinder Pump High Flow, 2 HP, 200 Volts, 1 Phase, 1-1/4" NPT Vertical, 56 GPM Max, 102 ft Max Head, 30 ft Cord, Manual
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Barnes SGVF High-Flow Submersible Grinder Pump
This grinder pump is designed to reduce domestic, commercial, institutional and light industrial sewage to a finely ground slurry. This model comes with a cast iron vortex impeller capable of handling sewage slurry with no possibility of clogging.
Features
- Recessed vortex impeller design virtually eliminates pump damage from cavitation
- Unique and robust 3-bearing shaft support design significantly extends mechanical seal life by minimizing shaft deflection
- Cast iron impeller will not corrode
- Exclusive Slicerator grinder eliminates jams
- Quick-connect power cord eliminates wiring mistakes
- Double mechanical seal provides clean environment for long life
- 1-1/4" NPT, vertical, bolt-on flange
- Cast iron volute, motor housing and seal plate
- 300 series stainless impeller spacers and hardware
- Single row, ball and oil lubricated upper and intermediate bearings with sleeve oil lubricated lower bearings
- Oil filled, Class B insulated, squirrel cage induced motor
Note: This pump requires either a control panel or capacitor pack (P/N 073306A) in order to operate.
Brand | Barnes |
Mfg. Number | 110614 |
Model | SGVF2002L |
Product Type | Grinder pump - high flow |
Series | SGVF |
Application | Domestic/Commercial/Institutional |
Horsepower | 2 HP |
Voltage | 200 Volts |
Operation | Manual |
Phase | 1 |
Full Load Amps | 17 |
Frequency | 60 Hz |
Speed | 3450 RPM |
Discharge Connection | 1-1/4" NPT vertical |
Insulation Class | Class B |
Motor Housing | Cast Iron ASTM A-48, Class 30 |
Impeller Design | 12 vane vortex |
Locked Rotor Amps | 53 |
Impeller Material | Cast iron |
Volute Material | Cast Iron ASTM A-48, Class 30 |
Maximum Total Head | 102 ft |
Maximum Flow | 56 GPM |
Power Cord Length | 30 ft |
Overload Protection | Yes |
Maximum Fluid Temperature | 160°F (Intermittent) |
The Barnes SGVH series of grinder pumps is designed to reduce domestic, commercial, institutional and light industrial sewage to a finely ground slurry. This series comes with a cast iron vortex impeller capable of handling sewage slurry with no possibility of clogging.
Features
- Recessed vortex impeller design virtually eliminates pump damage from cavitation
- Unique and robust 3-bearing shaft support design significantly extends mechanical seal life by minimizing shaft deflection
- Cast iron impeller will not corrode
- Exclusive Slicerator grinder eliminates jams
- Quick-connect power cord eliminates wiring mistakes
- Double mechanical seal provides clean environment for long life
- 1-1/4" NPT, vertical, bolt-on flange
- Cast iron volute, motor housing and seal plate
- 300 series stainless impeller spacers and hardware
- Single row, ball and oil lubricated upper and intermediate bearings with sleeve oil lubricated lower bearings
- Oil filled, Class B insulated, squirrel cage induced motor
- CSA/UL approved 12/4 Type SOW
BARNES SGVH SERIES GRINDER PUMPS |
Barnes SGVH Series Grinder Pumps
Model Comparison Chart
Model | Discharge (NPT Vertical) | HP | Voltage | Phase | GPM | Max. Head |
SGVF2022L | 1-1/4" | 2 | 240 | 1 | 56 | 102' |
SGVH2022L | 1-1/4" | 2 | 240 | 1 | 28 | 122' |
SGVH2002L | 1-1/4" | 2 | 200 | 1 | 28 | 122' |
SGVF2002L | 1-1/4" | 2 | 200 | 1 | 56 | 102' |
SGVF2052L | 1-1/4" | 2 | 600 | 3 | 56 | 102' |
SGVH2052L | 1-1/4" | 2 | 600 | 3 | 28 | 122' |
SGVF2032L | 1-1/4" | 2 | 240 | 3 | 56 | 102' |
SGVH2032L | 1-1/4" | 2 | 240 | 3 | 28 | 122' |
SGVF2042L | 1-1/4" | 2 | 480 | 3 | 56 | 102' |
SGVH2042L | 1-1/4" | 2 | 480 | 3 | 28 | 122' |
SGVF2062L | 1-1/4" | 2 | 200 | 3 | 56 | 102' |
SGVH2062L | 1-1/4" | 2 | 200 | 3 | 28 | 122' |
PERFORMANCE CURVES |
DIMENSIONS |
SPECIFICATIONS |
DIAGRAM |
REPAIR PARTS |
BROCHURE |
Barnes SGVH Series Grinder Pump Brochure |
SPECIFICATIONS |
Barnes SGVH Series Grinder Pump Specifications |
INSTALLATION MANUAL |
Barnes SGVH Series Grinder Pump Installation Manual |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*