Deming DEM318210526010, 2X1X9-1/2, TEFC, Vertical In-Line Industrial Process Pump, 1.5 HP, 230/460V, 3PH
SKU #: DEM318210526010
Brand: Deming
Available For Order! (Ships Direct From Manufacturer)This product is direct shipped from the manufacturer. The estimated shipping time may vary depending on the manufacturers stock, backlog or delay. If you would like to confirm the manufacturers lead time for this item, call our Pump Products sales team at 800-429-0800 between the hours of 7:30 A.M. - 4:30 P.M. E.S.T.
FEATURES
Deming 2x1x9-1/2 Vertical In-Line Industrial Process Pump
Deming Industrial Process Pumps offer you a broad line of pumps with a proven, cost saving in-line design. These versatile pumps efficiently handle a wide range of corrosive and non-corrosive liquids from water to hydrocarbons.
Deming 2x1x9-1/2 Vertical In-Line Industrial Process Pump Applications
- Chemical
- Petrochemical, Petroleum, Coal
- Fiber
- Pulp and Paper
- Food and Beverage
- Pharmaceutical Fats and Oils
- Soap
- Paint
- Automotive
- Primary Metal
- Rubber
- Metal
- Fabrication
- Utility
Deming 2x1x9-1/2 Vertical In-Line Industrial Process Pump Features
- Top Pull-Out Simplifies Maintenance: Complete Rotating Assembly Easily Removed for Inspection without Disturbing Piping. Full Circle Register Protected by CONFINED GASKET Assures Permanent Alignment.
- Dual Purpose Jack Screws: Built-In Jack Screws Simplify Removal and Protect Mechanical Seal During Disassembly. Packing Box Cover is Held Securely in Place on Adaptor After Pull-Out.
- Protected Shaft: One-Piece Shaft Assures Sustained Positive Alignment of Complete Pump-Motor Rotating Element, Eliminates Couplings and Minimizes Shaft Deflection. The Shaft Sleeve is a Non-Hooked Style and is Free to expand with Temperature Variation. It Extends Through the Gland, is Keyed to the Shaft and is Isolated from Contact with Liquid by Sleeve and Teflon O-Ring and Flat Gaskets.
Deming Vertical In-Line Industrial Process Pump Assembly.pdf
Deming Vertical In-Line Industrial Process Pump Brochure.pdf
Deming Vertical In-Line Industrial Process Pump Corrosion Allowance.pdf
Deming Vertical In-Line Industrial Process Pump Piping Connection.pdf
Deming Vertical In-Line Industrial Process Pump Pressure Temperature Ratings.pdf
Deming Vertical In-Line Industrial Process Pump Specifications.pdf
Deming Vertical In-Line Pump 1750 RPM Selection Curve.pdf
Deming Vertical In-Line Pump Performance Curve.pdf
Deming Vertical In-Line Industrial Process Pump Brochure.pdf
Deming Vertical In-Line Industrial Process Pump Corrosion Allowance.pdf
Deming Vertical In-Line Industrial Process Pump Piping Connection.pdf
Deming Vertical In-Line Industrial Process Pump Pressure Temperature Ratings.pdf
Deming Vertical In-Line Industrial Process Pump Specifications.pdf
Deming Vertical In-Line Pump 1750 RPM Selection Curve.pdf
Deming Vertical In-Line Pump Performance Curve.pdf
Brand | Deming |
HORSEPOWER | 1.5 HP |
PHASE | 3 Ph |
HERTZ | 60 Hz |
RPM | 1750 RPM |
DISCHARGE PIPE SIZE | 1.0" Discharge |
SUCTION SIZE | 2" |
STANDARD IMPELLER DIAMETER | 9-1/2" |
MOTOR ENCLOSURE | Totally Enclosed Motor (TEFC) |
PUMP SIZE | VA05-E |
MAX HEAD | 89' |
MAX FLOW RATE | 114 GPM |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
"Ask Inspector PumpHead"
*Note: Picture is illustrative and may not reflect the actual product.*