Baldor EM7045T-I, Explosion Proof Drill Rig Duty, 1.15 SF Motor, 5/7.5 HP, 190/380/230/460 Volts, 15.4/19.4/18.0/7.7/9.0 Amps, 3 Phase, 50/60 Hz, 3520/2930 RPM, 213T Frame, Standard, 3728M Motor Type, Steel Frame
Call Toll Free: 800-429-0800
FEATURES
Baldor Drill Rig Duty, 1.15 SF Motor
Baldor-Reliance Drill Rig, Division 1, Explosion Proof motor is designed to provide exceptional performance and long life in On and off shore drill rig service, bulk fuel terminals, and transfer stations where hydrogen sulfide is present. Division 1 enclosure will contain an explosion inside and not propagate it into the surrounding atmosphere. Designed for use in high humidity applications driving pumps, compressors, blowers, fans, and many other loads that require a 1.15 service factor. UL & CSA listed for Class I (Gas), Group C & D with a T3C temperature code. Motors are suitalble for fixed speed, sine wave only operation.
Features
- UL & CSA listed for Class I (Gas), Group C & D with a T3C temperature code
- Totally enclosed cast iron construction
- UL listed explosion proof breather drain
- Corrosion resistant epoxy finish. Class F Insulation and 1.15 service factor
- 60Hz & 50Hz data included on the nameplate. Suitable for 55 Degrees C at 1.0 service factor
- Super-E® explosion proof motors have NEMA Premium® efficiency and 3 year warranty
- Fixed speed sine wave operation only
Application
- Compressors
- Pumps
- Fans
- Conveyors
- Gear Reducers
Note: Picture is illustrative and may not reflect the actual product
| Brand | Baldor |
| Mfg. Number | EM7045T-I |
| Product Type | Explosion Proof Drill Rig Duty, 1.15 SF Motor |
| Horsepower | 5 / 7-1/2 HP |
| Voltage | 190/380/230/460 Volts |
| Phase | 3 |
| Frequency | 50/60 Hz |
| Synchronous Speed | 3600 RPM |
| Speed | 3520/2930 RPM |
| Speed Code | Single Speed |
| High Voltage Full Load Amps | 15.4/19.4/18.0/7.7/9.0 Amps |
| Frame Size | 213T |
| Motor Type | 3728M |
| Motor Standards | NEMA |
| Number of Poles | 2 |
| Pulley Face Code | Standard |
| Frame Material | Steel |
| Motor Lead Quantity/Wire Size | 9 @ 14 AWG |
| Overall Length | 19.57 in |
| Service Factor | 1.15 |
| Efficiency @ 100% Load | 89.50% |
| Duty Rating | CONT |
| Inverter Code | Not inverter |
| Auxillary Box | No Auxillary Box |
| Base Indicator | Rigid |
| Bearing Grease Type | POLYREX EM (-20F +300F) |
| Current | 15.4 A @ 190 V, 19.4 A @ 208 V, 18.0 A @ 230 V, 7.7 A @ 380 V, 9.0 A @ 460 V |
| Design Code | A |
| Drip Cover | No Drip Cover |
| Heater Indicator | No heater |
| KVA Code | J |
| Motor Lead Exit | KO Box |
| Motor Lead Termination | Flying Leads |
| Rodent Screen | None |
| Shaft Diameter | 1.375 in |
| Insulation Class | F |
| Power Factor | 84 |
| Pulley End Bearing Type | Sealed Bearing |
| Shaft Rotation | Reversible |
| Starting Method | Direct on line |
| Vibration Sensor Indicator | No Vibration Sensor |
| Thermal Device - Bearing | No |
| Thermal Device - Winding | No |
| Ambient Temperature | 40 °C |
| Agency Approvals | CSA, UL |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*
