Baldor CFSWDM3711T-E, Food Safe Stainless Steel Motor, 10 HP, 230/460 Volts, 10.6 Amps, 3 Phase, 60 Hz, 3500 RPM, TEFC Enclosure, 215TC Frame, C-Face, 3744M Motor Type, Stainless Steel Frame
SKU #: CFSWDM3711T-E
Brand: Baldor
Available For Order! (Ships in 1-2 Days)This product is direct shipped from the manufacturer. The estimated shipping time may vary depending on the manufacturers stock, backlog or delay. If you would like to confirm the manufacturers lead time for this item, call our Pump Products sales team at 800-429-0800 between the hours of 7:30 A.M. - 4:30 P.M. E.S.T.
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Baldor Food Safe Stainless Steel Motors
This Washdown Duty motor offers better performance & reliability are the inspirations behind Baldor’s new and improved Washdown Duty motors. We accomplished this by adding features like an improved paint system, Baldor’s Inverter Spike Resistant insulation system, Class F insulation with Class B (or lower) temperature rise, Mobil Polyrex EM grease, customer-friendly drain plugs, and shaft seals.
Note: Picture is illustrative and may not reflect the actual product
Brand | Baldor |
Mfg. Number | CFSWDM3711T-E |
Product Type | Food Safe Stainless Steel Motor |
Horsepower | 10 HP |
Voltage | 230/460 Volts |
Phase | 3 |
Frequency | 60 Hz |
Synchronous Speed | 3600 RPM |
Speed | 3500 RPM |
Speed Code | Single Speed |
High Voltage Full Load Amps | 10.6 Amps |
Enclosure | TEFC |
Frame Size | 215TC |
Motor Type | 3744M |
Motor Standards | NEMA |
Number of Poles | 2 |
Pulley Face Code | C-Face |
Frame Material | Stainless Steel |
Motor Lead Quantity/Wire Size | 9 @ 14 AWG |
Overall Length | 20.68 in |
Service Factor | 1.15 |
Efficiency @ 100% Load | 91.70% |
Duty Rating | CONT |
Inverter Code | Inverter ready |
Auxillary Box | No Auxillary Box |
Base Indicator | Rigid |
Bearing Grease Type | POLYREX EM (-20F +300F) |
Current | 23.0 A @ 208 V 21.2 A @ 230 V 10.6 A @ 460 V |
Design Code | A |
Drip Cover | No Drip Cover |
Heater Indicator | No heater |
KVA Code | L |
Motor Lead Exit | KO Box |
Motor Lead Termination | Flying Leads |
Rodent Screen | None |
Shaft Diameter | 1.375 in |
Insulation Class | H |
Power Factor | 94 |
Pulley End Bearing Type | Sealed Bearing |
Shaft Extension Location | Pulley End |
Shaft Rotation | Reversible |
Shaft Slinger Indicator | No Slinger |
Starting Method | Direct on line |
Vibration Sensor Indicator | No Vibration Sensor |
Thermal Device - Bearing | No |
Thermal Device - Winding | No |
Ambient Temperature | 40 °C |
Agency Approvals | CSA, CSA, EEV, UR |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
"Ask Inspector PumpHead"
*Note: Picture is illustrative and may not reflect the actual product.*