Goulds 15SH06D01D4E2, Centrifugal Pump, e-SH S-Group Series, 1 HP, 208-230/460 Volts, 3 Phase, 1750 RPM, 1-1/2" Discharge, 2-1/2" Suction, 5.62" Impeller, DPPE Enclosure, 96 GPM Max, 30 ft Max Head
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Goulds e-SH Close-Coupled Centrifugal Pump
The e-SH is a high performance stainless steel centrifugal end-suction pump suitable for handling water as well as non-aggressive or moderately aggressive fluids. The pump is equipped with interchangeable John Crane Type 21 mechanical seal, NEMA motor, and have a back pull-out design which means that impeller, bracket and motor can be extracted without disconnecting the pump body from the piping.
Features
- Compact design that saves space and simplifies maintenance
- Suction and discharge flanges mate with ANSI class 150 flanges
- Enclosed impeller and replaceable wear ring for high efficiency and maximum wear life
Applications
The e-SH is suitable for a wide range of non-aggressive to mildly aggressive fluids in commercial building, industrial & diverse OEM applications.
- Water intake
- Water transfer and circulation
- Pressure boosting
- Process cooling and heating
- Fluid transfer and transport
- Produced water transfer and boosting
- Boiler feed booster
Pumped Fluids
- Groundwater
- Potable water
- Process water
- Gray/used water
- Heat transfer fluids
- Produced water
Brand | Goulds |
Mfg. Number | 15SH06D01D4E2 |
Series | e-SH Group S |
Product Type | Centrifugal pump |
Application | Water transfer and circulation |
Horsepower | 1 HP |
Voltage | 208-230/460 volts |
Phase | 3 |
Frequency | 60 Hz |
Speed | 1750 rpm |
Dicharge Size | 1-1/2" |
Suction Size | 2-1/2" |
Impeller Diameter | 5.62" |
Pump Size | 1-1/2" x 2-1/2" x 6" |
Coupling Type | Close coupled |
Enclosure | DPPE |
Casing Material | Stainless steel 316L |
ImpellerMaterial | Stainless steel 316L |
Shaft Seal | Carbon/SiC/FKM |
Maximum Flow | 96 gpm |
Maximum Head | 30 ft |
Max. Temperature | 250°F |
Max. Working Pressure | 230 psi |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*