Goulds 2ED51F2AA, Submersible Effluent Pump, 2ED Series, 1-1/2 HP, 200 Volts, 3 Phase, 2" NPT Discharge, 131 GPM Maximum, 89 ft. Maximum Head, Cast Iron, 20 ft. Cord, Manual
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Goulds 2ED Series Submersible Effluent Pump Dual Seal with Sensor Probe
This is a submersible effluent pump designed for most effluent systems. This pump has a maximum spherical solids handling capability of up to 3/4 of an inch and is designed for continuous use.
Features
- Dual mechanical seals
- Lower: SILICON CARBIDE VS. SILICON CARBIDE sealing faces. Stainless steel metal parts, BUNA-N elastomers
- Upper: CARBON VS. CERAMIC sealing faces. Stainless steel metal parts, BUNA-N elastomers
- Seal sensor probe is located in oil-filled chamber. If pump should begin to leak past lower seal it indicates to pump control panel a fault has occurred. Requires optional Seal Fail Circuit in the control panel
- Corrosion resistant, stainless steel shaft. Threaded design. Locknut on all models to guard against component damage on accidental reverse rotation
- 300 series stainless steel fasteners
- Fully submerged in high-grade turbine oil for lubrication and efficient heat transfer
- Class F insulation motor
- Pump ratings are within the motor manufacturer's recommended working limits, can be operated continuously without damage when fully submerged
- Upper and lower heavy duty ball bearing construction
- Power and control cable are severe duty rated, oil and water resistant. 20 feet standard with optional lengths available
- O-ring assures positive sealing against contaminants and oil leakage
Applications
- Farms
- Trailer courts
- Effluent systems
- Motels
- Schools
- Hospitals
- Industry
Sump, Effluent and Sewage Pump Repair Parts.pdf
2ED Submersible Effluent Pumps Specifications.pdf
Wastewater Pumps Dewatering, Effluent and Sewage Installation-Operation Manual.pdf
2ED Effluent Pump Curve.pdf
High_Water_Alarm_Sales_Sheet_Brochure_40.pdf
SDS-GSP_Sink_Drain_System_Technical_Brochure_40.pdf
Brand | Goulds |
Mfg. Number | 2ED51F2AA |
Series | 2ED |
Product Type | Submersible effluent pump |
Application | Effluent systems |
Horsepower | 1-1/2 HP |
Voltage | 200 volts |
Phase | 3 |
Frequency | 60 Hz |
Speed | 3450 RPM |
Discharge Connection | 2" NPT |
Maximum Capacity | 131 GPM |
Maximum Head | 89 ft. |
Max. Solid Size | 3/4" |
Design | Submersible/Dual seal |
Overload Protection | Must be provided in starter unit. |
Impeller Diameter | 4.56" |
Impeller Material | Cast Iron |
Pump Casing Material | Cast Iron |
Shaft Seal Lower | Silicon Carbide/BUNA/300 SS |
Shaft Seal Upper | Carbon/Ceramic/BUNA/300 SS |
Cord Length | 20 ft. |
Max. Working Pressure | 55 PSI |
Max. Temperature | 104°F |
Code | A |
Maximum Current | 10.6 Amps |
Locked Rotor Current | 40.6 Amps |
KVA Code | K |
Full Load Motor Efficiency | 79% |
Resistance Start | NA |
Line-Line Resistance | 1.9 Ohms |
Power Cable Size | 14/4 |
Minimum Submergence | 6" below top of motor |
Maximum Submergence | 50 ft. |
Goulds 2ED series effluent pumps are submersible effluent pumps that can be used in a wide variety of effluent systems, commonly found in farms, trailer courts, motels, schools, hospitals and various industrial settings. 2ED series pumps can handle spherical solids up to 3/4". One of the main features of the 2ED series is the dual mechanical seal with sensor probe. The lower seal is comprised of silicon carbide vs. silicon carbide faces, while the upper seal is comprised of carbon vs. ceramic faces. Both seals include rugged stainless steel metal parts and are encased in BUNA-N elastomers. The seal sensor probe is located in an oil-filled chamber and can detect if leakage penetrates the lower seal. The sensor will send a signal to a Seal Fail Circuit in the control panel. An o-ring also assures positive sealing against contaminants and oil leakage. The pump body itself is rugged cast iron while the motor shaft is corrosion resistant stainless steel of a threaded design. A locknut guards against component damage on accidental reverse rotation. The fasteners are 300 series stainless steel as well, while the pump has upper and lower heavy duty ball bearings. The motor includes Class F insulation and is fully submerged in high grade turbine oil for lubrication and efficient heat transfer. The pump is rated for continuous use when submerged but can also be run dry without damage to the components. The power cable is severe duty rated, as well as oil and water resistant. Please see the application data below to determine if this wonderful series meets your needs.
GOULDS 2ED SERIES EFFLUENT PUMPS |
Model Comparison Chart
Model | Discharge | HP | Voltage | Phase | GPM | Max. Head | Cord |
2ED52B0FA | 2" NPT | 1/3 | 115 | 1 | 70 | 29' | 20' |
2ED52B0EA | 2" NPT | 1/3 | 115 | 1 | 70 | 29' | 20' |
2ED52B1EA | 2" NPT | 1/3 | 230 | 1 | 70 | 29' | 20' |
2ED52B1FA | 2" NPT | 1/3 | 230 | 1 | 70 | 29' | 20' |
2ED52B8FA | 2" NPT | 1/3 | 208 | 1 | 70 | 29' | 20' |
2ED52B8EA | 2" NPT | 1/3 | 208 | 1 | 70 | 29' | 20' |
2ED51C0DA | 2" NPT | 1/2 | 115 | 1 | 80 | 46' | 20' |
2ED51C0HA | 2" NPT | 1/2 | 115 | 1 | 60 | 61' | 20' |
2ED51C1DA | 2" NPT | 1/2 | 230 | 1 | 80 | 46' | 20' |
2ED51C1HA | 2" NPT | 1/2 | 230 | 1 | 60 | 61' | 20' |
2ED51C8HA | 2" NPT | 1/2 | 208 | 1 | 60 | 61' | 20' |
2ED51C8DA | 2" NPT | 1/2 | 208 | 1 | 80 | 46' | 20' |
2ED51C3DA | 2" NPT | 1/2 | 230 | 3 | 80 | 46' | 20' |
2ED51C4DA | 2" NPT | 1/2 | 460 | 3 | 80 | 46' | 20' |
2ED51C3HA | 2" NPT | 1/2 | 230 | 3 | 60 | 61' | 20' |
2ED51C4HA | 2" NPT | 1/2 | 460 | 3 | 60 | 61' | 20' |
2ED51C2DA | 2" NPT | 1/2 | 200 | 3 | 80 | 46' | 20' |
2ED51C2HA | 2" NPT | 1/2 | 200 | 3 | 60 | 61' | 20' |
2ED51D3CA | 2" NPT | 3/4 | 230 | 3 | 94 | 66' | 20' |
2ED51D1CA | 2" NPT | 3/4 | 230 | 1 | 94 | 66' | 20' |
2ED51D4CA | 2" NPT | 3/4 | 460 | 3 | 94 | 66' | 20' |
2ED51F8GA | 2" NPT | 1-1/2 | 208 | 1 | 95 | 128' | 20' |
2ED51D8CA | 2" NPT | 3/4 | 208 | 1 | 94 | 66' | 20' |
2ED51D2CA | 2" NPT | 3/4 | 200 | 3 | 94 | 66' | 20' |
2ED51E3BA | 2" NPT | 1 | 230 | 3 | 105 | 78' | 20' |
2ED51E1BA | 2" NPT | 1 | 230 | 1 | 105 | 78' | 20' |
2ED51E4BA | 2" NPT | 1 | 460 | 3 | 105 | 78' | 20' |
2ED51E8BA | 2" NPT | 1 | 208 | 1 | 105 | 78' | 20' |
2ED51E2BA | 2" NPT | 1 | 200 | 3 | 105 | 78' | 20' |
2ED51F4AA | 2" NPT | 1-1/2 | 460 | 3 | 131 | 89' | 20' |
2ED51F3GA | 2" NPT | 1-1/2 | 230 | 3 | 95 | 128' | 20' |
2ED51F8AA | 2" NPT | 1-1/2 | 208 | 1 | 131 | 89' | 20' |
2ED51F1GA | 2" NPT | 1-1/2 | 230 | 1 | 95 | 128' | 20' |
2ED51F3AA | 2" NPT | 1-1/2 | 230 | 3 | 131 | 89' | 20' |
2ED51F4GA | 2" NPT | 1-1/2 | 460 | 3 | 95 | 128' | 20' |
2ED51F1AA | 2" NPT | 1-1/2 | 230 | 1 | 131 | 89' | 20' |
2ED51F2AA | 2" NPT | 1-1/2 | 200 | 3 | 131 | 89' | 20' |
2ED51F2GA | 2" NPT | 1-1/2 | 200 | 3 | 95 | 128' | 20' |
PERFORMANCE CURVE |
REPAIR PARTS |
TYPICAL INSTALLATIONS |
OPERATION RECOMMENDATION |
CONSTRUCTION MATERIAL |
DIMENSIONS |
NOMENCLATURE GUIDE |