Goulds 2GA31K3DDX, Submersible Explosion Proof Grinder Pump, 2GAX Series, 11 HP, 230 Volts, 3 Phase, 2" Discharge, 195 GPM Max., 130 ft. Max. Head, Cast Iron Body, Manual, 30 ft. Cord
SKU #: 2GA31K3DDX
Brand: Goulds
Available For Order! ((Usually Ships 3-5 Days))This product is direct shipped from the manufacturer. The estimated shipping time may vary depending on the manufacturers stock, backlog or delay. If you would like to confirm the manufacturers lead time for this item, call our Pump Products sales team at 800-429-0800 between the hours of 7:30 A.M. - 4:30 P.M. E.S.T.
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
LIST PRICE 12,886.30
Disclaimer: "See final price in cart"
Call Sales Counter !
Calculate Shipping
Ship Weight (310.00 lbs)
FEATURES
Gould 2GAX Series Submersible Dual Seal Grinder Pump
This submersible, dual seal, grinder pmp is capable of grinding municipal, commercial and industrial sewage.
Features
-
Cutter system is designed to reduce sewage to a fine slurry
-
Cast iron, semi-open, non-overloading multi-vane design impeller with pump-out vanes for mechanical seal protection
-
Cast iron, volute type for high efficiency. Adaptable for slide rail system
-
Two coat paint system for superior surface protection
-
Float Leakage Sensor (FLS): a small internal float switch is used to detect the presence of water in the stator chamber. Standard on all models
-
Leakage Sensor Detector Circuit: The FLS, when activated, will cause the patented 24 volt MiniCAS monitoring relay to signal an alarm and, if desired, stop the pump. The MiniCAS 24 volt relay can be ordered separately for installation in a control panel by a UL or CSA certified panel shop or as a built-in option in our control panel
-
Maximum temperature rating: 104º F (40º C) continuous duty
-
Tandem mechanical seals
-
Fasteners are 300 series stainless steel
-
Rotating cutter is chrome alloyed cast iron
-
Cutter ring is hardened 316L stainless steel
-
Cast iron parts are ASTM A-48, Class 35B
-
Air-filled, NEMA type B squirrel cage induction motor
-
NEMA type B
-
Class F, 311º F (155º C) insulated stator winding
-
60 Hertz
-
Motor shaft is 431 series stainless steel, taper collet design
-
Oversized, pre-greased upper and lower ball bearings
-
Power cord is 30 feet standard, single jacket, 6 conductor combination power and control cable. Optional 100 foot lead is available
-
Designed for a maximum of 15 evenly spaced starts per hour
-
Built-in thermal sensors provide an over temperature signal to the Mini CAS (Control and Status) monitoring relay mounted in the control panel. The Mini CAS can be ordered separately or ordered as an option in our control panel
-
Common pump motor shaft and compact seal design permit short overhang minimizing shaft deflection
-
Motor casings have integral cooling ribs for maximum heat dissipation
-
Shaft mounting is a robust maintenance free design featuring pre-greased ball bearings
-
The junction chamber is completely sealed off from the surrounding liquid and incorporates a separate gland assembly with a strain relief clamp
-
Also available in optional Explosion Proof construction. Explosion Proof motor listed Class 1, Division 1, Groups C and D. These units are FM approved
Note: Three phase units can use standard panel selections with option added for minicas device (i.e. options O, simplex and P, duplex).
Applications
-
High head and pressure sewage systems for:
-
Municipal
-
Commercial
-
Industrial
-
Brand | Goulds |
Mfg. Number | 2GA31K3DDX |
Series | 2GAX |
Product Type | Grinder pump |
Application | Pressure sewage systems |
Horsepower | 11 HP |
Voltage | 230 volts |
Phase | 3 |
Frequency | 60 Hz. |
Speed | 3475 RPM |
Max. Amps | 26 amps |
Start Amps | 229 amps |
Locked Rotor Amps | 164 amps |
Design | Submersible/Explosion proof/Dual seal |
Discharge Connection | 2" |
Maximum Capacity | 195 GPM |
Maximum Head | 130 ft. |
Operation | Manual |
Min. Submergence (Continuous) | Top of motor dome |
Max. Submergence | 65 ft. |
Impeller Code | D |
Impeller Material | Cast iron |
Pump Casing Material | Cast Iron |
Motor Shaft Material | 431 Stainless steel |
Rotating Cutter Material | Chrome alloyed cast iron |
Cutter Ring Material | 316L Stainless steel |
Shaft Seal | tungsten carbide/tungsten carbide lower, carbon/ceramic upper |
Overload Protection | No, required in control panel |
Motor Insulation | Class F |
Max. Working Pressure | 80 PSI |
Max. Temperature | 104°F |
Power Cord Size | 8/4 & 10/3 |
Cord Length | 30 ft. |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
"Ask Inspector PumpHead"
*Note: Picture is illustrative and may not reflect the actual product.*