Goulds 4XD12K4MC, 4XD Series, Explosion Proof Sewage Pump, 7-1/2 HP, 460 Volts, 3 Phase, 4" ANSI Flanged Discharge, 910 GPM Max, 56 ft Max Head, 25 ft Cord
SKU #: 4XD12K4MC
Brand: Goulds
Available For Order! ((Usually Ships 3-5 Days))This product is direct shipped from the manufacturer. The estimated shipping time may vary depending on the manufacturers stock, backlog or delay. If you would like to confirm the manufacturers lead time for this item, call our Pump Products sales team at 800-429-0800 between the hours of 7:30 A.M. - 4:30 P.M. E.S.T.
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
LIST PRICE 14,099.40
Disclaimer: "See final price in cart"
Call Sales Counter !
Calculate Shipping
Ship Weight (495.00 lbs)
FEATURES
Goulds 4XD Non-Clog, Explosion Proof, Submersible Sewage Pump
This is a non-clog, explosion proof, submersible sewage pump used in hazardous locations. This pump is designed for continuous duty use submerged in water that is 104º F or below. Maximum runtime with pump unsubmerged is 15 minutes. Motor is suitable for 10 starts per hour. This pump can handle a maximum solid size of 3 inches.
Features
-
Cast iron, two vane closed design impeller for high efficiency and maximum wear life
-
Replaceable bronze wear ring to renew the running clearances and efficiencies to original conditions
-
Heavy duty cast iron casing, volute type for maximum efficiency. 4" 125# ANSI cast iron flanged. Adaptable to guide rail mounting system
-
Two independently mounted mechanical face type seals are separated by an oil filled chamber. The oil chamber acts as a barrier to trap moisture and provide time for a planned shutdown and maintenance. The oil provides lubrication to the internal (upper) seal
-
Carbon rotating and ceramic stationary faces are standard on both internal (upper) and external (lower) seals. Optional materials are available for the lower seals. These are recommended for applications containing fine solids or abrasives as found in parking lot/garage drainage and construction dewatering jobs
-
Two-wire, dual moisture sensing probes are located in the oil filled chamber between the inner and outer seals. When connected to a control panel with an optional moisture detection system and an alarm it will detect the presence of moisture should the outer seal fail. It will also detect moisture in the motor chamber and provide a warning prior to water levels reaching the bearing or stator
-
Single-row, angular contact, Conrad type bearings with a class 3 internal fit conforming to AFBMA standard 20 are used. The bearings are greased for life with a premium moisture resistant polyurea thickened grease containing rust inhibitors and suitable for operation over a range of – 13º F to + 248º F
-
Impeller mounting screw is 300 series stainless steel with anti-rotational locking patch
Applications
Heavy duty design features for a wide range of commercial and industrial applications such as:
- Sewage systems
- Flood and pollution control
- Industrial dewatering
- Wastewater treatment plants
- Municipal and subdivision lift stations
Note: Class 10 quick trip overload protection must be provided in control panel.
Five-Year Limited Warranty & Terms.pdf
AC Submersible Pump Motors Installation-Operation Manual.pdf
4XD Submersible 4 Inch Non-Clog Explosion Proof Sewage Pump Engineering Data.pdf
4XD Explosion Proof Submersible Sewage Pump Specifications.pdf
4XD_Submersible_4_Inch_Non-Clog_Explosion_Proof_Sewage_Pump_Brochure.pdf
Explosion_Proof_Wastewater_Pumps_Listed_Class_1_Groups_C_and_D_Hazardous_Locations_Installation-Operation_Manual.pdf
Sump_Effluent_and_Sewage_Pump_Repair_Parts_8.pdf
AC Submersible Pump Motors Installation-Operation Manual.pdf
4XD Submersible 4 Inch Non-Clog Explosion Proof Sewage Pump Engineering Data.pdf
4XD Explosion Proof Submersible Sewage Pump Specifications.pdf
4XD_Submersible_4_Inch_Non-Clog_Explosion_Proof_Sewage_Pump_Brochure.pdf
Explosion_Proof_Wastewater_Pumps_Listed_Class_1_Groups_C_and_D_Hazardous_Locations_Installation-Operation_Manual.pdf
Sump_Effluent_and_Sewage_Pump_Repair_Parts_8.pdf
Brand | Goulds |
Mfg. Number | 4XD12K4MC |
Series | 4XD |
Product Type | Explosion proof sewage pump/Continuous duty |
Application | Sewage/Dewatering |
Horsepower | 7-1/2 HP |
Voltage | 460 Volts |
Phase | 3 |
Frequency | 60 Hz |
Speed | 1750 RPM |
Service Factor Current | 11.7 Amps |
Full Load Current | 10.5 Amps |
Locked Rotor Amps | 80.0 Amps |
Discharge Connection | 4" #125 ANSI flanged |
Maximum Flow Capacity | 910 GPM |
Total Dynamic Head | 56 ft |
Impeller Design | Two vane, closed |
Impeller Code | M |
Impeller Diameter | 7.50" |
Impeller Material | Cast iron |
Maximum Solids Size | 3" |
Pump Housing Material | Cast iron |
Motor Casing Material | Cast iron |
Motor Shaft Material | 416 stainless steel |
Motor Insulation | Class F |
Maximum Submergence | 200 ft |
Shaft Seal | Carbon-rotary/ceramic-stationary/BUNA/304SS |
Overload Protection | Control panel required |
Maximum Working Pressure | 100 PSI |
Maximum Temperature | 104°F |
Power Cord | 8/4 |
Cord Length | 25 ft |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
"Ask Inspector PumpHead"
*Note: Picture is illustrative and may not reflect the actual product.*