Goulds WEHT0311M, High Temperature Sump Pump, Model 3885HT, Series WEHT, 1/3 HP, 115 Volts, 1 Phase, 2" NPT Discharge, 70 GPM Maximum, Manual, 20 ft. Cord
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Goulds 3885HT High Temperature Sump Pump
3885HT sump pump is designed for extreme operating conditions and is instrumental where liquids are too hot for conventionally built submersible pumps. This would include moving wastewater coming from high temperature processes like boiler blow down or hot water rinses in the commercial plumbing market and applications requiring handling liquids up to 200ºF.
This high temp sump pump is built to pump corrosive or non-corrosive, clear or solid laden liquids and offers the only silicon carbide mechanical seal faces and all cast iron construction in the market. Designed for extended life under extreme operating conditions, the 3885HT pump is able to handle the hottest of jobs with the greatest of ease.
The ability to work in extreme conditions is enhanced by the single-phase 1/3 HP pump motor. The motor has class B insulation and is rated for continuous operation when fully submerged. The motor uses high-grade turbine oil for lubrication and efficient heat transfer.
Features
- Cast iron, semi-open, non-clog impeller with pump-out vanes for mechanical seal protection
- Cast iron volute type for maximum efficiency
- Corrosion-resistant, stainless steel shaft with threaded design. Locknut on all models to guard against component damage on accidental reverse rotation
- 300 series stainless steel fasteners
- Capable of running dry without damage to components
- Capacitor start motor for maximum starting torque
- Built-in overload with automatic reset
- SJOOW severe duty oil and water resistant power cord, rated for high temperature
- NEMA three prong grounding plugs
Applications
Specifically designed for the following uses:
- Boiler blow down
- High temperature condensate
Brand | Goulds |
Mfg. Number | WEHT0311M |
Model Number | 3885HT |
Series | WEHT |
Product Type | High temp sump pump |
Application | High temperature wastewater |
Horsepower | 1/3 HP |
Voltage | 115 Volts |
Phase | 1 |
Frequency | 60 Hz |
Speed | 1750 rpm |
Operation | Manual |
Pump Casing | Cast iron |
Impeller Material | Cast iron |
Impeller Type | Semi-open with pump-out vanes |
Impeller Diameter | 5.38" |
Discharge Size | 2" NPT |
Maximum Flow | 70 gpm |
Maximum Head | 27 ft |
Maximum Solids Handling | 3/4" |
Motor Insulation | Class B |
Thermal Protection | Yes |
Maximum Current | 12 Amps |
Locked Rotor Current | 31.1 Amps |
KVA Code | J |
Full Load Motor Efficiency | 55% |
Resistance Start / Line-Line | 9.3 / 1.4 |
Maximum Temperature (Continuos) | 200°F |
The Goulds WEHT high temperature sump pumps series is designed for extreme operating conditions and is instrumental where liquids are too hot for conventionally built submersible pumps. Common applications include moving wastewater coming from high temperature processes like boiler blow down or hot water rinses in the commercial plumbing market, as well as applications requiring handling liquids up to 200ºF. These high temperature sump pumps are built to pump corrosive or non-corrosive, clear or solid laden liquids and offers the only silicon carbide mechanical seal faces and all cast iron construction in the market. Designed for extended life under extreme operating conditions, the Goulds WEHT pumps handle the hottest of jobs with the greatest of ease. The ability to work in extreme conditions is enhanced by the single-phase 1/3 HP pump motor. The motor has class B insulation and is rated for continuous operation when fully submerged. The motor uses high-grade turbine oil for lubrication and efficient heat transfer. Features include:
- Cast iron, semi-open, non-clog impeller with pump-out vanes for mechanical seal protection
- Cast iron volute type for maximum efficiency
- Corrosion-resistant, stainless steel shaft with threaded design. Locknut on all models to guard against component damage on accidental reverse rotation
- 300 series stainless steel fasteners
- Capable of running dry without damage to components
- Capacitor start motor for maximum starting torque
- Built-in overload with automatic reset
- SJOOW severe duty oil and water resistant power cord, rated for high temperature
- NEMA three prong grounding plugs
GOULDS WEHT SERIES HIGH TEMPERATURE SUMP PUMPS |
Model Comparison Chart
Model | Discharge | HP | Voltage | Phase | GPM | Max. Head | Operation | Cord |
WEHT0311M | 2" NPT | 1/3 | 115 | 1 | 70 | 29' | Manual | 20' |
WEHT0312M | 2" NPT | 1/3 | 230 | 1 | 70 | 29' | Manual | 20' |
WEHT0318M | 2" NPT | 1/3 | 208 | 1 | 70 | 29' | Manual | 20' |
WEHT0311MP1 | 2" NPT | 1/3 | 115 | 1 | 70 | 29' | Auto w/Ultra High-Temp. Float | 20' |
WEHT0312MP1 | 2" NPT | 1/3 | 230 | 1 | 70 | 29' | Auto w/Ultra High-Temp. Float | 20' |
WEHT0311MP115 | 1-1/2" NPT | 1/3 | 115 | 1 | 70 | 29' | Auto w/Ultra High-Temp. Float | 20' |
WEHT0312MP115 | 1-1/2" NPT | 1/3 | 230 | 1 | 70 | 29' | Auto w/Ultra High-Temp. Float | 20' |
WEHT0318MP1 | 2" NPT | 1/3 | 208 | 1 | 70 | 29' | Auto w/Ultra High-Temp. Float | 20' |
PERFORMANCE CURVE |
DIMENSIONS AND COMPONENTS |
TYPICAL INSTALLATIONS |
DATA |
NOMENCLATURE |
BROCHURE |
Goulds WEHT Series Sump Pump Brochure |
INSTRUCTIONS |
Goulds WEHT Series Sump Pump Instructions |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*