Grundfos 96083234, CR 3 Series, Model CR 3-25, Multistage Centrifugal Pump, 5 HP, 25 Stages, 208-230/460 Volts, 3 Phase, 3540 RPM, 60 Hz, 1-1/4" NPT Suction, 1-1/4" NPT Discharge, 23.81 GPM Max., 751.31 ft Max. Head, Cast Iron, HQQE Shaft Seal, ANSI Flang
SKU #: 96083234
Brand: Grundfos
Available For Order! (Ships Direct From Manufacturer)This product is direct shipped from the manufacturer. The estimated shipping time may vary depending on the manufacturers stock, backlog or delay. If you would like to confirm the manufacturers lead time for this item, call our Pump Products sales team at 800-429-0800 between the hours of 7:30 A.M. - 4:30 P.M. E.S.T.
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Grundfos CR 3 Complete Units with ANSI Flanged
This Complete Unit Multistage Centrifugal Pump is an assembly of CR pump, motor and integrated variable frequency drive. It is a system which is able to solve application problems and save energy by reducing installation and wiring costs.
Features:
- The CR pump, motor and VFD is an engineered product
- The CRE pump is supplied by one supplier
- The functionalities are designed for specific pump applications
- The CRE pump with sensor is a plug and pump product
- Grundfos quality and reliability
- A compact system
- The pump, motor and VFD are tested as a complete unit in the factory
Applications:
- Industrial Processing systems
- Washing and cleaning systems
- Pumping of acids and alkalis
- Filtration systems
- Water pressure boosting
- Water treatment
- HVAC
- Irrigation
Note: Picture is illustrative and may not reflect the actual product.
553379_1_Grundfos CR 3 Complete Units with ANSI Flanged_Product Flyer.pdf
553379_2_Grundfos CR 3 Complete Units with ANSI Flanged_Installation Sheet.pdf
553379_3_Grundfos CR 3 Complete Units with ANSI Flanged_Service Manual.pdf
553379_4_Grundfos CR 3 Complete Units with ANSI Flanged_Piping Connection.pdf
553379_5_Grundfos CR 3 Complete Units with ANSI Flanged_High Pressure Pump.pdf
553379_6_Grundfos CR 3 Complete Units with ANSI Flanged_Pulley-Head.pdf
553379_2_Grundfos CR 3 Complete Units with ANSI Flanged_Installation Sheet.pdf
553379_3_Grundfos CR 3 Complete Units with ANSI Flanged_Service Manual.pdf
553379_4_Grundfos CR 3 Complete Units with ANSI Flanged_Piping Connection.pdf
553379_5_Grundfos CR 3 Complete Units with ANSI Flanged_High Pressure Pump.pdf
553379_6_Grundfos CR 3 Complete Units with ANSI Flanged_Pulley-Head.pdf
Oil Capacity qt (L) | 60 Hz |
Oil Filter | 3540 RPM |
Low Oil Shutdown Method | Grundfos |
Battery Included | HQQE |
Battery Type | Cast Iron |
Battery Dimensions | 304 Stainless Steel |
Battery Charger Input Jack | 112CA |
Neutral Bonded to Ground | 96083234 |
Floating Neutral | 250°F |
Start Switch Type | CR 3-25 |
Switch Location | CR 3 |
Fuel Gauge | Multistage Centrifugal Pump |
Fuel Tank Capacity Gal (Ltrs) | Water treatment, irrigation |
Fuel Filter | 1-1/4" NPT |
Run Time at 50% (Hours) | 5 HP |
Run Time at 25% of Rated Load (Hours) | 1-1/4" NPT |
Included | 751.31 ft |
Handle Style | 23.81 GPM |
Length in (mm) | 182TC |
Width in (mm) | 208-230/460 Volts |
Height in (mm) | 3 |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
"Ask Inspector PumpHead"
*Note: Picture is illustrative and may not reflect the actual product.*