Grundfos 96523007, CR 10 Series, Model CR 10-3, Multistage Centrifugal Pump, 3 HP, 3 Stages, 208-230/460 Volts, 3 Phase, 3530 RPM, 60 Hz, 2" NPT Suction, 2" NPT Discharge, 69.16 GPM Max., 144.94 ft Max. Head, Cast Iron, HQQE Shaft Seal, ANSI Flanged, Wit
SKU #: 96523007
Brand: Grundfos
Available For Order! (Ships Direct From Manufacturer)This product is direct shipped from the manufacturer. The estimated shipping time may vary depending on the manufacturers stock, backlog or delay. If you would like to confirm the manufacturers lead time for this item, call our Pump Products sales team at 800-429-0800 between the hours of 7:30 A.M. - 4:30 P.M. E.S.T.
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Grundfos CR 10 Complete Units with ANSI Flanged
This Complete Unit Multistage Centrifugal Pump is a vertical multistage centrifugal pump. The in-line design enables the pump to be installed in a horizontal one-pipe system where the suction and discharge ports are in the same horizontal plane and have the same pipe dimensions. This design provides a more compact pump design and pipe work.
Features:
- The CR pump consists of two main components, the motor and the pump unit
- The motor on the CR pump is a heavy-duty 2 pole, NEMA C-face Grundfos specified motor
- This pump unit consists of optimized hydraulics, various types of connections, an outer sleeve, a top and various other parts.
- The functionalities are designed for specific pump applications
- A compact system with a basic CR pump range which can be applied in almost any industrial solutions
- The pump, motor and VFD are tested as a complete unit in the factory
Applications:
- Industrial processing systems
- Washing and cleaning systems
- Pumping of acids and alkalis
- Filtration systems
- Water pressure boosting
- Water treatment
- HVAC
- Irrigation
Note: Picture is illustrative and may not reflect the actual product.
553585_1_Grundfos CR 10 Complete Units ANSI Flanged_Brochure.pdf
553585_2_Grundfos CR 10 Complete Units ANSI Flanged_Installation sheet.pdf
553585_3_Grundfos CR 10 Complete Units ANSI Flanged_Instruction Sheet.pdf
553585_4_Grundfos CR 10 Complete Units ANSI Flanged_Service Manual.pdf
553585_5_Grundfos CR 10 Complete Units ANSI Flanged_Product Flyer.pdf
553585_6_Grundfos CR 10 Complete Units ANSI Flanged_Data Booklet.pdf
553585_2_Grundfos CR 10 Complete Units ANSI Flanged_Installation sheet.pdf
553585_3_Grundfos CR 10 Complete Units ANSI Flanged_Instruction Sheet.pdf
553585_4_Grundfos CR 10 Complete Units ANSI Flanged_Service Manual.pdf
553585_5_Grundfos CR 10 Complete Units ANSI Flanged_Product Flyer.pdf
553585_6_Grundfos CR 10 Complete Units ANSI Flanged_Data Booklet.pdf
Brand | 2" NPT |
Mfg. Number | 144.94 ft |
Product Type | 69.16 GPM |
Drip Cover | Grundfos |
Heater Indicator | 96523007 |
KVA Code | CR 10-3 |
Motor Lead Exit | CR 10 |
Motor Lead Termination | Multistage Centrifugal Pump |
Rodent Screen | Water treatment, irrigation |
Shaft Diameter | 3 HP |
Insulation Class | 182TC |
Power Factor | 208-230/460 Volts |
Pulley End Bearing Type | 3 |
Shaft Extension Location | 60 Hz |
Shaft Rotation | 3530 RPM |
Shaft Slinger Indicator | HQQE |
Starting Method | Cast Iron |
Vibration Sensor Indicator | 304 Stainless Steel |
Thermal Device - Bearing | 90FA |
Thermal Device - Winding | TEFC |
Ambient Temperature | 194°F |
Agency Approvals | 2" NPT |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
"Ask Inspector PumpHead"
*Note: Picture is illustrative and may not reflect the actual product.*