Grundfos 97743199, CR 32 Series, Model CR 32-1-1, Multistage Centrifugal Pump, 5 HP, 1 Stage, 208-230/460 Volts, 3 Phase, 3540 RPM, 60 Hz, 2-1/2" NPT Suction, 2-1/2" NPT Discharge, 211.45 GPM Max., 71.22 ft Max. Head, Cast Iron, HQQE Shaft Seal, ANSI Flan
SKU #: 97743199
Brand: Grundfos
Available For Order! (Ships Direct From Manufacturer)This product is direct shipped from the manufacturer. The estimated shipping time may vary depending on the manufacturers stock, backlog or delay. If you would like to confirm the manufacturers lead time for this item, call our Pump Products sales team at 800-429-0800 between the hours of 7:30 A.M. - 4:30 P.M. E.S.T.
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Grundfos CR 32 Complete Units with ANSI Flanged
This Complete Unit Multistage Centrifugal Pump is a vertical multistage centrifugal pump. The in-line design enables the pump to be installed in a horizontal one-pipe system where the suction and discharge ports are in the same horizontal plane and have the same pipe dimensions. This design provides a more compact pump design and pipe work.
Features:
- The CR pump consists of two main components, the motor and the pump unit
- The motor on the CR pump is a heavy-duty 2 pole, NEMA C-face Grundfos specified motor
- This pump unit consists of optimized hydraulics, various types of connections, an outer sleeve, a top and various other parts.
- The functionalities are designed for specific pump applications
- A compact system with a basic CR pump range which can be applied in almost any industrial solutions
- The pump, motor and VFD are tested as a complete unit in the factory
Applications:
- Industrial processing systems
- Washing and cleaning systems
- Pumping of acids and alkalis
- Filtration systems
- Water pressure boosting
- Water treatment
- HVAC
- Irrigation
Note: Picture is illustrative and may not reflect the actual product.
554003_1_Grundfos CR 32 Complete Units with ANSI Flanged_Brochure.pdf
554003_2_Grundfos CR 32 Complete Units with ANSI Flanged_Installation sheet.pdf
554003_3_Grundfos CR 32 Complete Units with ANSI Flanged_Instruction Sheet.pdf
554003_4_Grundfos CR 32 Complete Units with ANSI Flanged_Product Flyer.pdf
554003_5_Grundfos CR 32 Complete Units with ANSI Flanged_Data Booklet.pdf
554003_2_Grundfos CR 32 Complete Units with ANSI Flanged_Installation sheet.pdf
554003_3_Grundfos CR 32 Complete Units with ANSI Flanged_Instruction Sheet.pdf
554003_4_Grundfos CR 32 Complete Units with ANSI Flanged_Product Flyer.pdf
554003_5_Grundfos CR 32 Complete Units with ANSI Flanged_Data Booklet.pdf
Brand | 112CA |
Mfg. Number | TEFC |
Product Type | 250°F |
Horsepower | 2-1/2" NPT |
Voltage | 2-1/2" NPT |
Phase | 71.22 ft |
Output KW | 211.45 GPM |
Engine RPM | Grundfos |
Recommened Oil | 97743199 |
Lubricated Method | CR 32-1-1 |
Choke Location | CR 32 |
Fuel Shutt Off | Multistage Centrifugal Pump |
Starting Method | Water treatment, irrigation |
Low Oil Shutdown Method | 5 HP |
Neutral Bonded to Ground | 208-230/460 Volts |
Switch Location | 3 |
Fuel Tank Capacity Gal (Ltrs) | 60 Hz |
Run Time at 50% (Hours) | 3540 RPM |
Length in (mm) | HQQE |
Width in (mm) | Cast Iron |
Height in (mm) | 304 Stainless Steel |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
"Ask Inspector PumpHead"
*Note: Picture is illustrative and may not reflect the actual product.*