Myers MDC33M10, MDC Series, Sump Pump, 1/3 HP, 115 Volts, 1 Phase, 9.8 Amps, 1-1/2" NPT Discharge, 47 GPM Max, 24 ft Max Head, 10 ft Cord, Manual
SKU #: MDC33M10
Brand: Myers
Available For Order! (Ships Direct From Manufacturer)This product is direct shipped from the manufacturer. The estimated shipping time may vary depending on the manufacturers stock, backlog or delay. If you would like to confirm the manufacturers lead time for this item, call our Pump Products sales team at 800-429-0800 between the hours of 7:30 A.M. - 4:30 P.M. E.S.T.
LIST PRICE 313.60
Disclaimer: "See final price in cart"
Call Sales Counter !
Calculate Shipping
Ship Weight (24.00 lbs)
FEATURES
Myers MDC Sump/Light Effluent Pump
Designed for sump/light effluent dewatering applications.
A unique combination of corrosion-resistant materials makes this pump a great choice for extreme conditions. Pump intake screen, impeller, volute base, switch, and power cord are serviceable.
Features
- High-endurance, oil-cooled motor provides continuous bearing lubrication and maximizes heat dissipation
- Long-life carbon/ceramic seal protects motor against water leakage
- Heat sensor overload protection with automatic reset when motor cools to a safe operating temperature
Brand | Myers |
Mfg. Number | MDC33M10 |
Series | MDC |
Product Type | Sump light effluent pump |
Application | Basement sump / dewatering |
Operation | Manual |
Horsepower | 1/3 HP |
Voltage | 115 volts |
Phase | 1 |
Frequency | 60 Hz |
Current | 9.8 Amps |
Maximum Solids Size | 1/2" |
Discharge Connection | 1-1/2" NPT |
Minimum Sump Diameter | 10" |
Maximum Capacity | 47 gpm |
Shut-off head | 24 ft |
Liquids handling | Drainage effluent |
Lower Casing Volute | Engineered Polymer |
Shaft Seal | Carbon and ceramic |
Acceptable pH Range | 6 - 9 |
Thermal Protection | Yes |
Continuos Liquid Temp. | 130°F |
Cord Length | 10 ft |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
"Ask Inspector PumpHead"
*Note: Picture is illustrative and may not reflect the actual product.*