Baldor VESWDM3546, Paint Free Motor, 1 HP, 230/460 Volts, 1.5 Amps, 3 Phase, 1745 RPM, 60 Hz, TEFC Enclosure, 56C Frame, C-Face, 3524M Motor Type, Stainless Steel Frame
SKU #: VESWDM3546
Brand: Baldor
Available For Order! (Ships in 1-2 Days)This product is direct shipped from the manufacturer. The estimated shipping time may vary depending on the manufacturers stock, backlog or delay. If you would like to confirm the manufacturers lead time for this item, call our Pump Products sales team at 800-429-0800 between the hours of 7:30 A.M. - 4:30 P.M. E.S.T.
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Baldor Paint Free Motor
“Paint-Free” Washdown Duty motors are designed for applications where use of caustic cleaning solutions and regular high-pressure wash downs may compromise the surface of a painted motor.
Features
- Special processed cast endplates
- 300 Series stainless steel motor frame, base, shaft & hardware
- Labyrinth seal on the drive end
- 3 year warranty
- TEFC or TENV
Applications
- Conveyors
- Pumps
Note: Picture is illustrative and may not reflect the actual product
Brand | Baldor |
Mfg. Number | VESWDM3546 |
Product Type | Paint Free Motor |
Horsepower | 1 HP |
Voltage | 230/460 Volts |
Phase | 3 |
Frequency | 60 Hz |
Synchronous Speed | 1800 RPM |
Speed | 1745 RPM |
Current | 3.0 A @ 208 V, 2.9 A @ 230 V, 1.5 A @ 460 V |
Speed Code | Single Speed |
Enclosure | TENV |
High Voltage Full Load Amps | 1.5 Amps |
Frame Size | 56C |
Motor Type | 3524M |
Number of Poles | 4 |
Motor Standards | NEMA |
Frame Material | Stainless Steel |
Overall Length | 12.06 in |
Pulley Face Code | C-Face |
Service Factor | 1.15 |
Efficiency @ 100% Load | 85.50% |
Motor Lead Quantity/Wire Size | 9 @ 18 AWG |
Duty Rating | CONT |
Starting Method | Direct on line |
Design Code | B |
Inverter Code | Inverter ready |
Auxillary Box | No Auxillary Box |
KVA Code | M |
Base Indicator | No Mounting |
Bearing Grease Type | POLYREX EM (-20F +300F) |
Shaft Diameter | 0.625 in |
Insulation Class | F |
Drip Cover | No Drip Cover |
Heater Indicator | No heater |
Shaft Extension Location | Pulley End |
Shaft Rotation | Reversible |
Motor Lead Exit | KO Box |
Ambient Temperature | 40 °C |
Motor Lead Termination | Flying Leads |
Agency Approvals | CSA, CSA, EEV UR |
Rodent Screen | No |
Power Factor | 76 |
Pulley End Bearing Type | Sealed |
Shaft Slinger Indicator | No Slinger |
Vibration Sensor Indicator | No Vibration Sensor |
Thermal Device - Bearing | No |
Thermal Device - Winding | No |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
"Ask Inspector PumpHead"
*Note: Picture is illustrative and may not reflect the actual product.*