PHCC Pro-Series S3033-DFC1, Sump Pump With Dual Float Switch and Standard Controller, S3 Series, 1/3 HP, 115 Volts, 1-1/2" Discharge, 65 GPM Max, 30 ft Max Head, 10 ft Cord
SKU #: S3033-DFC1
Brand: PHCC Pro-Series
In Stock! (Ships Today !)
This item is In Stock at our warehouse distribution center. Stock orders placed Monday through Friday by 1:00 pm EST. will be shipped the same day. Orders placed Friday after 1:00 pm through Sunday will be shipped on Monday.
FEATURES
PHCC Pro Series S3033 Sump Pump
The S3033 sump pump is built to last and designed for energy efficiency. The S3033 pumps 6.2 gallons per watt hour (G/Wh) used, which is 180% more efficient than the competitive average of 1/3 HP sump pumps.
Package includes:
- Sump pump S3033
- Standard controller
- Dual float switch
Pump Features
- Cast iron/stainless steel construction
- Energy ecient permanent split capacitor (PSC) motor
- Continuous duty rated
- Thermally protected
- Water cooled
- Stainless steel shaft and fasteners
- Upper and lower sealed ball bearings
- Dual carbon/ceramic seals plus (1) Buna-N seal
- Equipped with stainless steel hose clamp
- 10 feet pump cord
- Pump dimensions - 7.9" width, 5.3" depth, 13" height
- 3 year warranty
- CSA listed
Controller Features
- Activates the pump when water raises either float
- Once the float drops to the original position the pump runs for an additional 10 seconds to completely empty the sump pit
Dual Float Switch Features
- Two micro reed activated floats for added reliability
- Protective cage prevents debris from interfering with floats
- Easy installation
- Solid top keeps out sand and dirt
- Vented, curved bottom prevents debris build-up under the float
- Mounts to discharge pipe with included stainless steel hose clamp
- Activation level is adjustable
- 10 feet float switch
Brand | PHCC Pro Series |
Mfg. Number | S3033-DFC1 |
Series | S3 |
Product Type | Sump pump |
Application | Basement draining/dewatering |
Horsepower | 1/3 HP |
Voltage | 115 Volts |
Frequency | 60 Hz |
Float Switch Style | Dual float switch |
Pump Construction | Cast iron/stainless steel |
Strainer Material | Polypropylene |
Discharge Connection | 1-1/2" |
Flow @ 10 ft Head | 50 GPM |
Maximum Flow | 65 GPM |
Maximum Head | 30 ft |
Motor Type | Permanent Split Capacitor |
Thermal Protection | Yes |
Amp. Draw @ 10 ft Head | 4 Amps |
Pump Dimensions | 7.9" Width, 5.3" Depth, 13" Height |
Cord Length | 10 ft |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
"Ask Inspector PumpHead"
*Note: Picture is illustrative and may not reflect the actual product.*