PHCC Pro-Series ST1033-DFC1.5, Sump Pump With Dual Float Switch and Enhanced Controller, ST Series, 1/3 HP, 115 Volts, 1-1/2" Discharge, 64 GPM Max, 29 ft Max Head, 10 ft Cord
SKU #: ST1033-DFC1.5
Brand: PHCC Pro-Series
In Stock! (Ships Today !)
This item is In Stock at our warehouse distribution center. Stock orders placed Monday through Friday by 1:00 pm EST. will be shipped the same day. Orders placed Friday after 1:00 pm through Sunday will be shipped on Monday.
FEATURES
PHCC Pro Series ST1033-DFC1.5 Sump Pump
The ST1033 sump pump is built to last and designed for energy efficiency. The ST1033 pumps 6.1 gallons per watt hour (G/Wh) used, which is 172% more efficient than the competitive average of 1/3 HP sump pumps.
Package includes:
- Sump pump ST1033
- Enhanced controller
- Dual float switch
Pump Features
- Cast iron/cast aluminum construction
- Energy efficient permanent split capacitor (PSC) motor
- Continuous duty rated
- Thermally protected
- Water cooled
- Stainless steel fasteners
- Upper and lower sealed ball bearings
- Dual carbon/ceramic seals plus (1) Buna-N seal
- Equipped with stainless steel hose clamp
- Flows 46.1 GPM @ 10 ft head
- 10 ft. power cord
- Pump dimensions - 7-1/2" width, 5" depth, 13-3/4" height
- 18 month warranty
Controller Features
- Adjustable run time from 5-45 seconds after the float drops
- Activates pump weekly to exercise, extending pump life
- System operating light
- Universal mounting tabs
- 2 ft. power cord
- Piggy-back plug
Dual Float Switch Features
- Two micro reed activated floats for added reliability
- Protective cage prevents debris from interfering with floats
- Float switch can be unplugged from controller for easy installation
- Solid top keeps out sand and dirt
- Vented, curved bottom prevents debris build-up under the float
- Mounts to discharge pipe with included stainless steel hose clamp
- Activation level is adjustable
- 10 ft float switch
Brand | PHCC Pro Series |
Mfg. Number | ST1033-DFC1.5 |
Series | ST |
Product Type | Sump pump |
Application | Basement draining/dewatering |
Horsepower | 1/3 HP |
Voltage | 115 Volts |
Frequency | 60 Hz |
Float Switch Style | Dual float switch |
Pump Construction | Cast iron/cast aluminum |
Strainer | Electroplated steel |
Discharge Connection | 1-1/2" |
Flow @ 10 ft Head | 46.1 GPM |
Maximum Flow | 64 GPM |
Maximum Head | 29 ft |
Motor Type | Permanent Split Capacitor |
Thermal Protection | Yes |
Amp. Draw @ 10 ft Head | 3.8 Amps |
Pump Dimensions | 7-1/2" Width, 5" Depth, 13-3/4" Height |
Cord Length | 10 ft |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
"Ask Inspector PumpHead"
*Note: Picture is illustrative and may not reflect the actual product.*