SJE-Rhombus 1012543, 15MMDCUWOP, MicroMaster AC/DC Series, Wide Angle Pump Switch without Plug, Normally Closed, 12 VDC or 125/250 VAC, Clamp Mounted, 15 ft Cord

FEATURES

SJE Rhombus MicroMaster AC/DC Pump Float Switch

This mechanically-activated switch is designed for direct control of pumps at 12 VDC, 125 VAC or  250 VAC. It is ideal for battery backup pumps and arcing loads. The SJE MicroMaster AC/DC pump switch is not sensitive to rotation or turbulence allowing it to be used in both calm and turbulent applications.

Applications

Normally closed to pump up or fill in:

• Non-potable water
• Sewage

Features

• For use with 12 VDC pumps within specified amp ratings below:
• 10 Amps maximum pump running current
• 100 Amps maximum pump starting current
• For use with 50/60 Hz, 125 VAC, single phase pumps within specified amp ratings below:
• 10 Amps maximum pump running current
• 60 Amps maximum pump starting current
• For use with 50/60 Hz, 250 VAC, single phase pumps within specified amp ratings below:
• 8 Amps maximum pump running current
• 60 Amps maximum pump starting current
• Mechanically-activated, snap action contacts
• Adjustable pumping range of 8 to 36 inches
• Maximum water depth is 33 feet or 13 psi
• High impact, corrosion resistant, polypropylene float housing for use in water up to 140°F
• Float dimensions (2.74" diameter x 4.83" length)
• Cable is flexible 18 gauge, 2 conductor (UL, CSA) SJOW, water-resistant (CPE)
• UL recognized for use in non-potable water and sewage
• CSA certified
• Five-year limited warranty

Notes

• This switch is NOT recommended for controlling:
• Electric loads less than 100 milliamps, 12 VAC
• Non-arcing electric loads
•  This switch must be used with pumps that provide integral thermal overload protection