SJE-Rhombus 1038943, Oil Spotter Auto Series, Simplex 120V Control and Alarm System with Oil Water Float Switch, 15 Amps Max, Indoor Use

FEATURES

SJE Rhombus Oil Spotter Auto Single Phase Control and Alarm System for water/oil environments

The SJE Oil Spotter Auto control and alarm system is designed to control one 120V single phase pump in indoor simplex pump applications. This system provides pump control, valve control, and alarm notification of potentially threatening water and oil levels in simplex pumping applications. The system features an innovative Oil Water switch that senses the difference between oil and water to remove water from the tank, while preventing oil from being pumped into the environment. The Oil Spotter Auto employs a terminal block for one 120 VAC pump, a 120 VAC oil containment valve and a 120 VAC water drain valve. Another terminal block is for wiring the Oil Spotter Auto probe, high water alarm float, and auxiliary alarm connection. The panel also includes a Auto/Hand pump switch and Water/Oil Drain selection switch (functions in HAND mode only).

In normal operation the pump will turn on and off as the water level activates the probes (5" pumping range). If the water level rises enough to activate the high water probe, a red indicator will illuminate and activate auxiliary contacts. If the oil level reaches the high oil float, a red indicator will illuminate and activate the auxiliary contacts, the pump energizes along with the valves to automatically remove contaminated water/oil into the appropriate holding vessel. In Hand operation (spring loaded) the operator can manually pump out the water/oil from the pit. The valve selection switch allows the operator to choose if the valves are activated or not.

Package includes:

• (1) Oil Spotter Auto control
• (1) Oil Water float switch

Features

• NEMA 1 rated for indoor use
• Water/Oil Drain switch (functions in Hand mode only)
• SJE Oil Spotter Auto Panel with LED indicators for:
• High Water Indicator (red)
• High Oil Indicator (red)
• Pump Run Indicator (green)
• Power Indicator (green)
• Oil Water switch includes:
• High Oil float
• High Water Probe
• Start Probe
• Stop Probe
• Reference Probe
• Auto/Hand switch (spring loaded to Auto)
• Pump Disconnect Breaker
• Control Fuse
• Entire system is UL and cUL Listed to meet and/or exceed industry safety standards
• Helps satisfy requirements of an ASME A17.1 compliant system
• Five-year limited warranty

Applications

• Elevator sump basins
• Transformer vaults
• Leachate well applications
• Garages