Baldor SUM70154SM, Submersible/Immersible Motors, 1-1/2 HP, 230/460 Volts, 2.3 Amps, 3 Phase, 60 Hz, 1735 RPM, TENV Enclosure, 180TY Frame, P-Base, M Motor Type, Cast Iron Frame
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Baldor Submersible/Immersible Motors
submersible motors for both wet & dry pit applications. Wet pit motors use the effluent for cooling and can run 15 minutes in air. Dry pit motors are designed to run continuously in air or submerged. All cast iron construction, 416 stainless steel shafts, dual carbon ceramic mechanical seals, two NC thermostats and 25 feet of cable are standard. Dual moisture sensing probes. 1.15 service factor. UL listed motors are Division 1, Class I, group C&D, T3C temp code. 5 year pro-rated warranty. Also inverter capable for 10:1 variable torque in Division 1, Class I, group C&D, with T2A temp code.
Features
- Municipal and industrial waste water
Applications
- Slurry pumps
- Aerators
- Mixers
Note: Picture is illustrative and may not reflect the actual product
Brand | Baldor |
Mfg. Number | SUM70154SM |
Product Type | Submersible/Immersible Motors |
Horsepower | 1-1/2 HP |
Voltage | 230/460 Volts |
Phase | 3 |
Frequency | 60 Hz |
Speed | 1735 RPM |
Speed Code | Single Speed |
High Voltage Full Load Amps | 2.3 Amps |
Enclosure | TENV |
Frame Size | 180TY |
Motor Type | M |
Motor Standards | NEMA |
Number of Poles | 4 |
Pulley Face Code | P-Base |
Frame Material | Cast Iron |
Overall Length | 28.00 in |
Service Factor | 1.15 |
Duty Rating | 15 MIN |
Inverter Code | Inverter ready |
Mounting Type | FOOT |
Base Indicator | No Mounting |
Bearing Grease Type | POLYREX EM (-20F +300F) |
Current | 4.6 A @ 230 V, 2.3 A @ 460 V |
Design Code | B |
Drip Cover | No Drip Cover |
Heater Indicator | No heater |
KVA Code | L |
Shaft Diameter | 0.875 in |
Insulation Class | F |
Pulley End Bearing Type | Ball |
Shaft Rotation | Reversible |
Shaft Slinger Indicator | No Slinger |
Starting Method | Direct on line |
Thermal Device - Winding | Normally Closed Thermostat |
Ambient Temperature | 40 °C |
Agency Approvals | CCSA, US, CSA, UL |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*