Zoeller 294-0035, Model IX294, X290 Series, Explosion Proof High Head Sewage Pump, 1-1/2 HP, 200-208 Volts, 1 Phase, 2" NPT Flange Vertical Discharge, 196 GPM Max, 62 ft Max Head, 20 ft Cord, Manual
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Zoeller IX294 Explosion Proof Sewage Pump
This Waste-Mate series submersible pump is designed for use in residential or commercial wastewater applications in Class I, Division 1, Group C and D locations. Each pump is FM/CSA approved and features innovative motor and electrical enclosures that are designed to reduce the risk of vapor ignition both inside and outside the pump. Should vapors inside the electrical enclosures become ignited, the enclosures are engineered to contain the event and prevent escalation. Each pump is constructed of hardware that will allow it to operate safely and efficiently in extreme conditions.
WARNING: Not for use in acidic, methanol, or ethyl acetate atmospheres.
Features
- Corrosion-resistant, powder coated epoxy finish
- Durable cast iron cover, motor adapter and pump housing
- Stainless steel bolts, handle, guard and float rod guide, switch arm and actuator assembly
- Stainless steel screws and handle
- Includes a stainless steel lifting bracket for easy installation and removal
- FM listed motor for Class I, Division 1, Group C & D environments
- Motor - 60 Hz, 3450 RPM, oil-filled, hermetically sealed, automatic reset thermal overload protected
- Moisture sensors prewired in motor housing (functionality requires indicator circuit in panel)
- Non-clogging bronze vortex impeller design
- Upper ball bearing and lower ball bearing running in bath of oil
- Neoprene square ring seals
- 20 ft UL listed 5-wire (1 phase)
- Sensor leads & power leads in one cord for easy installation
- Maximum temperature for sewage or dewatering is 104°F
- Surface temperature code T5 (1 phase)
- Passes 2" spherical solids
- Major width: 13-5/16"
- Height: 23-9/32"
- 100% computerized texting and 100% tested submerged in water
- This model is also available with 25, 35 and 50 ft cord lengths
- Control panel with intrinsically safe relays and moisture indicator is required
Control Panel Options
Below are Zoeller control panels that can be used with this pump.
This series of submersible pumps is designed for use in residential or commercial wastewater applications in Class I, Division 1, Group C and D locations. Each pump is FM/CSA approved and features innovative motor and electrical enclosures that are designed to reduce the risk of vapor ignition both inside and outside the pump. Should vapors inside the electrical enclosures become ignited, the enclosures are engineered to contain the event and prevent escalation. Each pump is constructed of hardware that will allow it to operate safely and efficiently in extreme conditions. As with every Zoeller pump, each one is 100% factory tested to ensure quality and reliability for years of trouble-free performance!
Features
- Automatic models are available with an optional seal failure panel (P/N 10- 1031).
- Nonautomatic units require a Zoeller control panel with intrinsically safe relays and a moisture indicator.
- Surface temperature code T5 (1 Ph) or T6 (3 Ph).
- Includes a stainless steel lifting bracket for easy installation and removal.
- All models are hermetically sealed to be watertight, dust-tight, and completely submersible.
ZOELLER X290 SERIES SEWAGE PUMPS |
Model Comparison Chart
Model | Discharge (NPT Flange Vertical) | HP | Voltage | Phase | GPM | Max. Head |
NX292 | 2" | 1/2 | 115 | 1 | 140 | 42' |
EX292 | 2" | 1/2 | 230 | 1 | 140 | 42' |
IX292 | 2" | 1/2 | 200-208 | 1 | 140 | 42' |
EX293 | 2" | 1 | 230 | 1 | 118 | 50' |
JX292 | 2" | 1/2 | 200-208 | 3 | 140 | 42' |
GX292 | 2" | 1/2 | 460 | 3 | 140 | 42' |
FX292 | 2" | 1/2 | 230 | 3 | 140 | 42' |
IX293 | 2" | 1 | 200-208 | 1 | 118 | 50' |
JX293 | 2" | 1 | 200-208 | 3 | 118 | 50' |
GX293 | 2" | 1 | 460 | 3 | 118 | 50' |
FX293 | 2" | 1 | 230 | 3 | 118 | 50' |
EX294 | 2" | 1-1/2 | 230 | 1 | 196 | 62' |
IX294 | 2" | 1-1/2 | 200-208 | 1 | 196 | 62' |
EX295 | 2" | 2 | 230 | 1 | 214 | 75' |
IX295 | 2" | 2 | 200-208 | 1 | 214 | 75' |
JX294 | 2" | 1-1/2 | 200-208 | 3 | 196 | 62' |
GX294 | 2" | 1-1/2 | 460 | 3 | 196 | 62' |
FX294 | 2" | 1-1/2 | 230 | 3 | 196 | 62' |
HX294 | 2" | 1-1/2 | 200-208 | 1 | 196 | 62' |
MX292 | 2" | 1/2 | 115 | 1 | 140 | 42' |
FX295 | 2" | 2 | 230 | 3 | 214 | 75' |
JX295 | 2" | 2 | 200-208 | 3 | 214 | 75' |
GX295 | 2" | 2 | 460 | 3 | 214 | 75' |
DX292 | 2" | 1/2 | 230 | 1 | 140 | 42' |
HX292 | 2" | 1/2 | 200-208 | 1 | 140 | 42' |
DX293 | 2" | 1 | 230 | 1 | 118 | 50' |
DX294 | 2" | 1-1/2 | 230 | 1 | 196 | 62' |
DX295 | 2" | 2 | 230 | 1 | 214 | 75' |
HX295 | 2" | 2 | 200-208 | 1 | 214 | 75' |
PERFORMANCE CURVES |
DIMENSIONS |
SERVICE CHECKLIST |
SPECIFICATIONS |
TDH FLOW PER MINUTE |
OWNER'S MANUAL |
Zoeller X290 Series Sewage Pumps Owners Manual |
SPECIFICATIONS |
Zoeller X290 Series Sewage Pumps Specifications |
TECHNICAL DATA |
Zoeller X290 Series Sewage Pumps Technical Data |
WIRING DIAGRAM |
Zoeller X290 Series Sewage Pumps Wiring Diagram |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*