Zoeller 4294-0004, Model E4294, Waste-Mate 290 Series, High Head Sewage Pump, 1-1/2 HP, 230 Volts, 1 Phase, 2" NPT Flanged Discharge, 195 GPM Max, 62 ft Max Head, 20 ft Cord, Manual, Double Seal

SKU #: 4294-0004
Brand: Zoeller
In Stock! (Ships Today !) This item is In Stock at our warehouse distribution center. Stock orders placed Monday through Friday by 1:00 pm EST. will be shipped the same day. Orders placed Friday after 1:00 pm through Sunday will be shipped on Monday.
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
$1,104.95
Call Sales Counter !
Order By Phone
Calculate Shipping Ship Weight (96.00 lbs)
0 reviews for this product

FEATURES

Zoeller's E4294 High Head Waste-Mate Non-Automatic Cast Iron Sewage Pump

Designed for use in residential or light commercial dewatering and wastewater applications and can be used to transfer groundwater and effluent or raw sewage. The innovative vortex impeller design reduces the risk of clogging and allows each pump to pass 2" (50 mm) spherical solids. These durable cast iron pumps include a powder coated epoxy finish to prevent corrosion, and are designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance.

Features

  •     Durable cast iron constructed switch case, base, motor and pump housing
  •     No sheet metal parts to rust or corrode
  •     All cast iron class 25-30 25000# tensile strength
  •     Stainless steel screws, bolts, float rod, handle, guard, arm and seal assembly
  •     Oil-filled, hermetically sealed, automatic reset thermal overload protected (1 Ph only) motor
  •     Bronze class 84-8-0-4, non-clogging vortex impeller
  •     Maximum temperature for sewage or dewatering 130°F (54°C), 120°F (49°C) for WD295
  •     If over 130°F (54°C), consult factory
  •     Shaft seal - stainless steel carbon & ceramic rotary
  •     Corrosion resistant powder coated epoxy finish
  •     Upper sleeve bearing and lower ball bearing running in bath of oil
  •     Neoprene square ring & gasket
  •     All models pass 2" spherical solids
  •     Automatic units available with float operated, submersible (NEMA 6)2-pole mechanical switch
  •     On point: 14-3/4"
  •     Off point: 5"
  •     2" NPT female flanged vertical discharge (3" Optional)
  •     100% computerized tested
  •     Reserve powered design. For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.

Double Seal Features

  •     Gives motor extra protection from seal leaks
  •     Improved bearing lubrication
  •     Helps eliminate seal and bearing damage from dry runs

Applications

Residential or light commercial dewatering and wastewater.

 

BrandZoeller
Mfg. Number4294-0004
Model E4294
SeriesWaste-Mate 290
Product TypeSewage pump
ApplicationSewage/Dewatering pump
OperationManual
Horsepower1.5 HP
Voltage230 Volts
Phase1
Frequency60 Hz
Speed3450 RPM
Seal TypeDouble
Pump Housing MaterialCast iron
Impeller MaterialCast iron
Impeller TypeNon-clogging vortex
Maximum Solids Handling2"
Discharge Connection2" NPT flanged vertical
Maximum Flow195 GPM
Maximum Head62 ft
Cord Length20 ft
Maximum Fluid Temperature130°F

Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order

Inspector Pumphead & Our Customer Service Representatives Are Available

Mon-Fri 8 am to 5:30 pm EST
Sat 8 am to 4:30 pm EST

Call Toll Free: 800-429-0800

"Ask Inspector PumpHead"


*Note: Picture is illustrative and may not reflect the actual product.*