Zoeller 651-0025, Model JX651, X600 Series, Explosion Proof Sewage-Waste Pump, 5 HP, 200 Volts, 3 Phase, 3" NPT Vertical Discharge, 533 GPM Max, 54 ft Max Head, 25 ft Cord, Manual

SKU #: 651-0025
Brand: Zoeller
Available For Order! ((Usually Ships 3-5 Days))This product  is direct shipped from the manufacturer. The estimated shipping time may vary depending on the manufacturers stock, backlog or delay. If you would like to confirm the manufacturers lead time for this item, call our Pump Products sales team at 800-429-0800 between the hours of 7:30 A.M. - 4:30 P.M. E.S.T.
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
$6,767.74
Call Sales Counter !
Order By Phone
Calculate Shipping Ship Weight (295.00 lbs)

FEATURES

Zoeller JX651 Explosion Proof Sewage Pump

This submersible pumps is designed for use in residential or commercial wastewater applications in Class I, Division 1, Group C and D environments. Each pump is FM/CSA approved and features an innovative motor and electrical enclosure that is designed to reduce the risk of vapor ignition both inside and outside the pump. Should vapors inside the electrical enclosure become ignited, the enclosure is engineered to contain the event and prevent escalation. Each pump is constructed of hardware that will allow it to operate safely and efficiently in extreme conditions.

Features

  • FM and cCSAus rated Class I, Division 1, Group C & D environments
  • Non-clogging semi-open ductile iron impeller
  • Class 30 cast iron construction
  • Double seal for extra motor protection
  • Corrosion-resistant, powder coated epoxy finish
  • Stainless steel screws, washers, tags and seal assembly
  • Explosion proof motor - 1750 RPM, hermetically sealed and oil-filled for added heat dissipation
  • Thermal sensor
  • Continuous duty operation in submerged conditions
  • Maximum temperature for sewage or dewatering - 104°F
  • 416 stainless steel motor shaft
  • Tandem stainless steel fitted shaft seals with carbon and ceramic seal faces
  • Seal leak probes
  • Oversized upper and lower ball bearings running in oil bath
  • Buna N square rings and seals
  • Passes 2-1/2" spherical solids
  • 25' UL listed power and sensor cord
  • Major width: 17-9/16"
  • Major height: 33-1/4"
  • 100% computerized tested
  • Nonsparking rail systems available for all models
  • Extra cord lengths available in 35 and 50 feet

Control Panel Options

Below are Zoeller control panels that can be used with this pump.

Please see the manuals for specifications on this item

This series of submersible pumps is designed for use in residential, commercial or industrial wastewater applications in Class I, Division 1, Group C and D locations. Each pump is FM/CSA approved and features innovative motor and electrical enclosures that are designed to reduce the risk of vapor ignition both inside and outside the pump. Should vapors inside the electrical enclosures become ignited, the enclosures are engineered to contain the event and prevent escalation. Each pump is constructed of hardware that will allow it to operate safely and efficiently in extreme conditions. As with every Zoeller pump, each one is 100% factory tested to ensure quality and reliability for years of trouble free performance! This attention to detail is an inherent feature of every pump in this series, making it one of the most reliable in the industry.

Features

  • All units require a control panel with intrinsically safe relays and a moisture indicator.
  • Surface temperature code T5 (1 Ph) or T6 (3 Ph).
  • An optional lifting bail is available for easy installation and removal.
  • All models are hermetically sealed to be watertight, dust-tight, and completely submersible.
  • Reserve Powered Design: For unusual conditions, a reserve safety factor is engineered into the design of every pump.

APPLICATIONS

  • Pumping Station.
  • Storm Water Removal.
  • All Wastewater Removal.
  • Industrial Waste.
  • Warning: Not for use in acidic atmospheres.
ZOELLER X600 SERIES SEWAGE PUMPS

Model Comparison Chart

Model Discharge (NPT) HP Voltage Phase GPM Max. Head
611-0024 3" Vertical 1 230 3 250 22'
611-0025 3" Flange Horizontal 1 230 3 250 22'
611-0022 3" Horizontal 1 200 3 250 22'
611-0029 4" Flange Horizontal 1 460 3 250 22'
611-0026 4" Flange Horizontal 1 230 3 250 22'
611-0027 3" Vertical 1 460 3 250 22'
611-0021 3" Vertical 1 200 3 250 22'
611-0023 4" Flange Horizontal 1 200 3 250 22'
611-0028 3" Flange Horizontal 1 460 3 250 22'
621-0029 3" Vertical 1-1/2 460 3 320 29'
621-0025 4" Flange Horizontal 1-1/2 200 3 320 29'
621-0028 4" Flange Horizontal 1-1/2 230 3 320 29'
621-0027 3" Flange Horizontal 1-1/2 230 3 320 29'
621-0030 3" Flange Horizontal 1-1/2 460 3 320 29'
621-0024 3" Flange Horizontal 1-1/2 200 3 320 29'
621-0026 3" Vertical 1-1/2 230 3 320 29'
621-0031 4" Flange Horizontal 1-1/2 460 3 320 29'
621-0023 3" Vertical 1-1/2 200 3 320 29'
631-0029 4" Flange Horizontal 2 230 3 390 34'
631-0025 3" Flange Horizontal 2 200 3 390 34'
631-0028 3" Flange Horizontal 2 230 3 390 34'
631-0030 3" Vertical 2 460 3 390 34'
631-0024 3" Vertical 2 200 3 390 34'
631-0027 3" Vertical 2 230 3 390 34'
631-0032 4" Flange Horizontal 2 460 3 390 34'
631-0031 3" Flange Horizontal 2 460 3 390 34'
631-0026 4" Flange Horizontal 2 200 3 390 34'
641-0030 3" Vertical 3 200 3 460 44'
641-0034 3" Flange Horizontal 3 230 3 460 44'
641-0037 3" Flange Horizontal 3 460 3 460 44'
641-0033 3" Vertical 3 230 3 460 44'
641-0031 3" Flange Horizontal 3 200 3 460 44'
641-0038 4" Flange Horizontal 3 460 3 460 44'
641-0035 4" Flange Horizontal 3 230 3 460 44'
641-0036 3" Vertical 3 460 3 460 44'
611-0020 4" Flange Horizontal 1 230 1 250 22'
611-0018 3" Vertical 1 230 1 250 22'
611-0019 3" Flange Horizontal 1 230 1 250 22'
641-0032 4" Flange Horizontal 3 200 3 460 44'
621-0020 3" Vertical 1-1/2 230 1 320 29'
621-0022 4" Flange Horizontal 1-1/2 230 1 320 29'
621-0021 3" Flange Horizontal 1-1/2 230 1 320 29'
631-0021 3" Vertical 2 230 1 390 34'
631-0023 4" Flange Horizontal 2 230 1 390 34'
631-0022 3" Flange Horizontal 2 230 1 390 34'
641-0028 3" Flange Horizontal 3 230 1 420 39'
641-0029

Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order

Inspector Pumphead & Our Customer Service Representatives Are Available

Mon-Fri 7:30 am to 5:00 pm EST

Call Toll Free: 800-429-0800

"Ask Inspector PumpHead"

*Note: Picture is illustrative and may not reflect the actual product.*