Zoeller 912-1116, Preassembled Simplex Sewage Package W/ Alarm, M266 Pump, 1/2 HP, 115 Volts, 2" NPT Discharge, (24" x 24") Poly-Molded Basin, 2" Vent
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Zoeller 912 Preassembled Simplex Sewage Package
This preassembled Simplex Sewage package is job-ready for a quick and easy installation, saving labor and reducing installation errors. No assembly required. Just drop it in the hole-and-go!
Package includes:
- Automatic sewage pump model M266
- 24" x 24" barrel basin
- One piece PSF cover with 2" vent, 2" discharge
- Internal 2" PVC discharge pipe, 24" long
- 4" pipe seal hub
- Indoor alarm model 10-1494
Package Features
- 2" solids handling pump
- Polyethylene molded basin
- 3/16" vent hole drilled
- All units are properly secured with a 2" PVC discharge pipe in the basins to avoid shifting or upsetting the pump and switch mechanism
Pump M266 Features
- Automatic, 1/2 HP, 115V, single phase/60 Hz
- Oil filled
- Float operated, submersible (NEMA 6) 2-pole mechanical switch
- Durable cast construction
- Non-clogging vortex impeller design
- Engineered plastic impeller with metal inserts
- Not affected by materials normally found in drainage and sewage sumps
- Stainless steel screws, bolts, handle, guard, and arm and seal assembly
- Passes 2-inch spherical solids
- 2” NPT Discharge.
- On point: 12"
- Off point: 4"
Basin Features
- 24" depth for easier installation in troublesome areas
- 41-gallon capacity (exceeds 18 x 30)
- 25-gallon capacity below 4" inlet
- Vertical support ribs help eliminate stuck float switches
- Anti-flotation device helps to eliminate basin from "floating"
- 360° molded handle (acts as secondary AFD)
- (1) 4" pre-drilled inlet (flex-coupling provided by others)
- (7) additional flat areas for inlet installation (field drilled)
- Molded torque stops for added pump support
- One-piece molded PSF cover with integrated molded foam seal
- Ribbed reinforced cover to provide additional strength and stability
- Threaded 2" vent and 2" discharge piping connections
- Stainless steel cover bolts and hardware
- High water alarm available on certain packages
- Stackable for storage/shipping
Please note that this package requires a check valve (sold separately) in order to reduce unnecessary cycling of pump. Check valve options include: 30-0151, 30-0020, 30-0021, 30-0101 or 30-0103.
Photo is illustrative and may not reflect the actual product.
The Zoeller 912 series of preassembled sewage systems is job-ready and provides for quick and easy installation, saving labor and reducing installation errors. No assembly required. Just drop it in the hole-and-go!
Systems include
- (1) 2” (50 mm) solids sewage ejector
- (1) 24” x 24” (61 x 61 cm) poly-molded basin
- (1) PSF cover with 2V2D
- Internal 2” (DN50) PVC discharge pipe
Pump Features
- Cast iron construction (models 264/266)
- Thermoplastic construction (model 211)
- Automatic or piggyback configuration available
- Full 2” (50 mm) spherical solids capacity
- Thermal overload protection
- Non-clogging vortex impeller
Basin Features
- 24" (61 cm) depth for easier installation in troublesome areas
- 41 gallon (155 liter) capacity (exceeds 18 x 30)
- 25 gallon (95 liter) capacity below 4" inlet
- Vertical support ribs help eliminate stuck float switches
- Anti-flotation device (AFD) helps to eliminate basin from "floating”
- 360° molded handle (acts as secondary AFD)
- (1) 4" pre-drilled inlet (flex-coupling provided by others)
- (7) additional flat areas for inlet installation (field-drilled)
- Molded torque stops for added pump support
- One-piece molded PSF cover with integrated, molded foam seal
- Ribbed, reinforced cover to provide additional strength and stability
- Threaded 2" vent and 2" discharge piping connections
- Stainless steel cover bolts and hardware
- High water alarm available on certain packages
- Stackable for storage/shipping
ZOELLER 912 SERIES PREASSEMBLED SEWAGE SYSTEMS |
Model Comparison Chart
Model | Discharge (NPT) | HP | Voltage | Pump Model | GPM | Max. Head |
912-0112 | 2" | 4/10 | 115 | M211 | 82 | 19' |
912-1112 | 2" | 4/10 | 115 | M211 | 82 | 19' |
912-0113 | 2" | 4/10 | 115 | BN211 | 82 | 19' |
912-1113 | 2" | 4/10 | 115 | BN211 | 82 | 19' |
912-0114 | 2" | 4/10 | 115 | M264 | 90 | 18' |
912-1114 | 2" | 4/10 | 115 | M264 | 90 | 18' |
912-0115 | 2" | 4/10 | 115 | BN264 | 90 | 18' |
912-1115 | 2" | 4/10 | 115 | BN264 | 90 | 18' |
912-0116 | 2" | 1/2 | 115 | M266 | 115 | 20' |
912-1116 | 2" | 1/2 | 115 | M266 | 115 | 20' |
912-0117 | 2" | 1/2 | 115 | BN266 | 115 | 20' |
912-1117 | 2" | 1/2 | 115 | BN266 | 115 | 20' |
PERFORMANCE CURVES |
DIMENSIONS |
TDH FLOW PER MINUTE |
CHECK VALVE OPTIONS |
BROCHURE |
Zoeller 912 Series Preassembled Sewage Systems Brochure |
PACKAGE CATALOG |
Zoeller 912 Series Preassembled Sewage Systems Package Catalog |
PACKAGE SPECIFICATIONS |
Zoeller 912 Series Preassembled Sewage Systems Package Specifications |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*