Blog

The Sta-Rite ProJet SL series convertible jet pumps are corrosion resistant pumps built for water and sprinkling systems in homes, farms and cottages. Each pump is made of rugged cast iron and a built-in regulator offers easy priming and a better range of performance. Package Includes: Pump Motor Pressure switch (pre-set at 30-50 psi) Features Close-grained cast iron pump body is a rugged one-piece unit, specially treated to resist corrosion Drain port provided for easy winterizing Noryl impeller is precision-molded for perfect balance and ultra-smooth for highest performance and efficiency Multiport and precision-molded polypropylene diffuser allows pump to prime faster and handle more air Superior insulation materials protect against excessive moisture and contaminants and assure prolonged motor life Shielded and permanently lubricated heavy-duty ball bearings are extensively tested to ensure extended life and smooth, quiet operation High quality pressure switch with cut-in adjustable pressure setting is adjustable. Fixed 20 psi differential Mechanical shaft seal is precision-lapped and constructed with highly polished carbon-ceramic and stainless steel. Internal design guarantees continuous water lubrication for maximum protection Dynamically balanced rotor is diecast under high pressures for uniform performance and greater efficiency 416 stainless steel pump and motor shaft for maximum corrosion resistance One-piece threaded shaft for positive impeller drive and alignment Dustproof canopy protects all electrical components from dirt, dust and insects; ventilating air cannot contaminate vital switching components Suction port: suction-over-drive Notes: Pumps installed with a Pro-Source tank require a 100 psi relief valve Pumps installed with a conventional tank require a 75 psi relief valve A Jet package is required in order to "complete" a convertible jet pump so that it functions properly in the given application Relief valve must be capable of relieving entire flow of pump at relief pressure Please note that if using this pump for NEW INSTALLATIONS, a jet assembly package must be purchased separately (see brochure in Manuals tab for choosing the appropriate jet assembly). STA-RITE SL/SLJ PROJET SERIES CONVERTIBLE JET PUMPS Model Comparison Chart Model Discharge Suction Drive HP Voltage Phase Approx. Weight SLC-L 1" NPT 1-1/4" NPT 1" NPT 1/2 115/230 1 40 lbs. SLD-L 1" NPT 1-1/4" NPT 1" NPT 3/4 115/230 1 42 lbs. SLE-L 1" NPT 1-1/4" NPT 1" NPT 1 115/230 1 60 lbs. SLF-L 1" NPT 1-1/4" NPT 1" NPT 1-1/2 115/230 1 65 lbs. PERFORMANCE RATINGS TYPICAL INSTALLATION DIMENSIONAL DATA REPAIR PARTS BROCHURE Sta-Rite SL ProJet Series Brochure MANUAL Sta-Rite HL ProJet Series Owner's Manual INSTRUCTIONS Sta-Rite Well Pump Pressure Switch Instructions Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

The Sta-Rite ProJet HL series convertible jet pumps are corrosion resistant pumps built for water and sprinkling systems in homes, farms and cottages. Each pump is made of rugged cast iron and offers easy priming and a better range of performance. Features: Close-grained cast iron pump body is a rugged one-piece unit, specially treated to resist corrosion Drain port provided for easy winterizing Noryl impeller is precision-molded for perfect balanc and ultra-smooth for highest performance and efficiency Multiport and precision-molded polypropylene diffuser allows pump to prime faster and handle more air High quality pressure switch with cut-in and differential pressure setting are adjustable Mechanical shaft seal is precision-lapped and constructed with highly polished carbon-ceramic and stainless steel. Internal design guarantees continuous water lubrication for maximum protection Superior insulation materials protect against excessive moisture and contaminants and assure prolonged motor life Dynamically balanced rotor is diecast under high pressures for uniform performance and greater efficiency Shielded and permanently lubricated heavy-duty ball bearings are extensively tested to ensure extended life and smooth, quiet operation 416 stainless steel pump and motor shaft for maximum corrosion resistance One-piece threaded shaft for positive impeller drive and alignment Dustproof canopy protects all electrical components from dirt, dust and insects; ventilating air cannot contaminate vital switching components Suction port: suction-over-drive Please note that if using this pump for NEW INSTALLATIONS, a jet assembly package must be purchased separately (see brochure in Manuals tab for choosing the appropriate jet assembly). Notes: Pumps installed with a Pro-Source tank require a 100 psi relief valve Pumps installed with a conventional tank require a 75 psi relief valve A Jet package is required in order to "complete" a convertible jet pump so that it functions properly in the given application STA-RITE HL PROJET SERIES CONVERTIBLE JET PUMPS Model Comparison Chart Model Discharge Suction Drive HP Voltage Phase Approx. Weight HLC-L 1-1/4" NPT 1" NPT 1" NPT 1/2 115/230 1 42 lbs. HLD-L 1-1/4" NPT 1" NPT 1" NPT 3/4 115/230 1 60 lbs. HLE-L 1-1/4" NPT 1" NPT 1" NPT 1 115/230 1 65 lbs. PERFORMANCE RATINGS TYPICAL INSTALLATION DIMENSIONAL DATA REPAIR PARTS BROCHURE Sta-Rite HL ProJet Series Brochure MANUAL Sta-Rite HL ProJet Series Owner's Manual INSTRUCTIONS Sta-Rite Well Pump Pressure Switch Instructions Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

The Sta-Rite PL series convertible jet pumps are corrosion resistant pumps built for water systems, sprinkling systems and various applications in homes, farms and cottages. Each pump is made of durable fiberglass reinforced thermoplastic, ensuring years of trouble-free installation. Features Pump rustproof constructed body is Dura-Glas fiberglass reinforced thermoplastic—lightweight, rustproof and exceptionally strong. All components in contact with water are resistant to the corrosive and abrasive forces found in the most aggressive water conditions Precision-molded Noryl impeller gives perfect balance and ultra-smoothness for highest performance and efficiency Noryl Nozzle Noryl Venturi Buna-N O-ring Stainless steel heat sink provides maximum cooling of the mechanical shaft seal Heavy-duty motor has a dustproof canopy which completely encloses electrical components and provides dust, dirt and insect protection. Ventilating air cannot contaminate vital switching components. Permanently lubricated, heavy-duty ball bearings ensure smooth, quiet operation and extended motor life Precision Diffuser has a multi-port, reinforced polypropylene with brass wear ring design, primes faster and handles more air Shallow well jet is sold separately Pressure Switch Pre-Set at 30–50 PSI Suction-over-drive suction ports Performance-proven, simple, built-in pressure regulator is adjustable for best performance on all deep well installations. Pressure gauge included. Easy Serviceability: PL pumps are disassembled by removing the stainless steel clamp. Piping does not have to be disturbed. Seal replacement takes only a few minutes. “Control room” motor design makes all components easily accessible Please note that if using this pump for NEW INSTALLATIONS, a jet assembly package must be purchased separately (see brochure in Manuals tab for choosing the appropriate jet assembly). STA-RITE PL SERIES CONVERTIBLE JET PUMPS Model Comparison Chart Model Discharge Suction Drive HP Voltage Phase Shut-Off Pressure Approx. Weight PLC-2L 1" NPT 1-1/4" NPT 1" NPT 1/2 115/230 1 62-72 PSI 27 lbs. PLD-2L 1" NPT 1-1/4" NPT 1" NPT 3/4 115/230 1 52-62 PSI 28 lbs. PLE-2L 1" NPT 1-1/4" NPT 1" NPT 1 115/230 1 52-62 PSI 30 lbs. PLF-2L 1" NPT 1-1/4" NPT 1" NPT 1-1/2 115/230 1 54-64 PSI 36 lbs. PERFORMANCE RATINGS TYPICAL INSTALLATION DIMENSIONAL DATA REPAIR PARTS SPECIFICATIONS Sta-Rite PL Series Specifications MANUAL Sta-Rite PL Series Manual Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

The Sta-Rite HMS Series pumps are horizontal, multi-stage jet pumps primarily used for water and sprinkling applications in homes, farms and cottages. These convertible pumps can be used as shallow well, deep well or centrifugal pumps. Features Close-grained cast iron pump body is rugged, one-piece unit, specially treated to resist corrosion Drain port provided for easy winterizing Precision-machined diffusers assure faster priming Precision-lapped and highly polished carbon-ceramic mechanical shaft seal with stainless steel construction. Internal design guarantees continuous water lubrication for maximum protection Precision molded polycarbonate impeller for perfect balance and ultrasmooth for highest performance and efficiency Motor windings with superior insulation materials protect against excessive moisture and contaminants to ensure prolonged motor life All electrical components are protected from dirt, dust and insects by a dustproof canopy. Ventilating air cannot contaminate vital switching components eliminating the most common cause of motor failure Dynamically balanced rotor is diecast under high pressures for uniform performance and greater efficiency Heavy-duty ball bearings are shielded and permanently lubricated, extensively tested to ensure extended life and smooth, quiet operation Pump and motor shaft are made of stainless steel for maximum corrosion resistance; one-piece threaded shaft for positive impeller drive and alignment Suction port: drive-over-suction Notes Pumps installed with a Pro-Source tank require a 100 psi relief valve Pumps installed with a conventional tank require a 75 psi Relief valve must be capable of relieving entire flow of pump at relief pressure Please note that if using this pump for NEW INSTALLATIONS, a jet assembly package and an automatic pressure regulator PKG 107 must be purchased separately (see brochure in Manuals tab for choosing the appropriate jet assembly). STA-RITE HMS SERIES HORIZONTAL MULTI-STAGE CONVERTIBLE JET PUMPS Model Comparison Chart Model Discharge Suction Drive HP Voltage Phase Stages Approx. Weight HMSD-1FL 1" NPT 1-1/4" NPT 1" NPT 3/4 115/230 1 2 50 lbs. HMSE-1FL 1" NPT 1-1/4" NPT 1" NPT 1 115/230 1 2 80 lbs. HMSF-1FL 1" NPT 1-1/4" NPT 1" NPT 1-1/2 115/230 1 2 85 lbs. PERFORMANCE RATINGS TYPICAL INSTALLATION DIMENSIONAL DATA REPAIR PARTS BROCHURE Sta-Rite HMS Series Technical Brochure MANUAL Sta-Rite HMS Series Owners Manual INSTRUCTIONS Sta-Rite HMS Series Pressure Switch Instructions Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

The Sta-Rite FL series convertible jet pumps are self-priming pumps used for water systems, sprinkling applications and various water transfer applications in homes, farms and cottages. The same convertible jet can be attached to pump for use on shallow well installation, or be utilized in 4" or larger wells for use as a double pipe deep well jet. FL Series pumps provide high capacities up to 11 GPM and depths to 90 feet. They are rated for 30–50 PSI operation. Features Body and Base: Close-grained cast iron Lexan Impeller is precision-molded for perfect balance and ultra-smooth for highest performance and efficiency Precision-molded diffuser allows pump to prime faster, handle more air, with multi-port 416 Stainless steel pump and motor shaft for maximum corrosion resistance; one-piece threaded shaft for positive impeller drive and alignment Drive-over-suction ports Quality close-grained cast iron pump body and base are rugged one-piece unit, specially treated to resist corrosion. Drain port provided for easy winterizing Mechanical shaft seal is precision-lapped and highly polished carbon-ceramic, stainless steel construction. Internal design guarantees continuous water lubrication for maximum protection Motor windings are made of superior insulation materials protect against excessive moisture and contaminants, assuring prolonged motor life Dynamically balanced rotor is diecast under high pressures for uniform performance and greater efficiency Heavy-duty ball bearings are shielded, permanently lubricated bearings, extensively tested to ensure extended life and smooth, quiet operation Dustproof canopy protects all electrical components from dirt, dust and insects; ventilating air cannot contaminate vital switching components. Eliminates the most common cause of motor failure Simple, built-in pressure regulator is performance proven. Adjustable for best performance on all deep well installations Pressure switch pre-set to30–50 PSI Please note that if using this pump for NEW INSTALLATIONS, a jet assembly package must be purchased separately (see brochure in Manuals tab for choosing the appropriate jet assembly). STA-RITE FL SERIES CONVERTIBLE JET PUMPS Model Comparison Chart Model Discharge Suction HP Voltage Phase Max. GPM Shut-Off Pressure FLC-L 1" NPT 1-1/4" NPT 1/2 115/230 1 11 54-84 PSI FLD-L 1" NPT 1-1/4" NPT 3/4 115/230 1 11 54-96 PSI PERFORMANCE RATINGS TYPICAL INSTALLATION DIMENSIONAL DATA MANUAL Sta-Rite FL Series Installation Manual SPECIFICATIONS Sta-Rite FL Series Specifications Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.