Blog

The Sta-Rite ProJet SN series pumps are corrosion and abrasion-resistant and are ideal for wells with pumping levels of 25' or less. These pumps are ideal for water and sprinkling systems in homes, farms and cottages. Self-priming after the pump housing is initially filled with water. Features: Quality constructed close-grained cast iron body. Drain port provided for easy winterizing Built-in Jet: High-strength Lexan nozzle and venturi for maximum resistance to corrosion and abrasion. Cleanout plug provided for ease of service Precision-molded, Noryl impeller for perfect balance and ultra-smooth for highest performance and efficiency Pump primes faster, handles more air, with multi-port, precision-molded, reinforced polypropylene diffuser Mechanical shaft seal is precision lapped and highly polished carbon-ceramic, 416 grade stainless steel construction. Internal design guarantees continuous water lubrication Motor windings are made of superior insulation materials protect against excessive moisture and contaminants, assuring prolonged motor life Rotor is diecast under high pressures for uniform performance and greater efficiency, dynamically balanced Heavy-duty ball bearings are shielded, permanently lubricated bearings, extensively tested to ensure extended life and smooth, quiet operation Pump and Motor Shaft: Stainless steel for maximum corrosion resistance; one-piece threaded shaft for positive impeller drive and alignment All electrical components are protected from dirt, dust and insects by a dustproof canopy; ventilating air cannot contaminate vital switching components Professional quality pressure switch, allows cut-in adjustments Max. Liquid Temperature: 140°F Max. Inlet Pressure: 50 PSI Average Priming Time (in minutes) at 15 Feet: SNC = 2.3; SND = 1.7 SNE = 1.3; SNF = 1.1 Average Priming Time (in minutes) at 25 Feet: SNC = 6.4; SND = 4.4< SNE = 4.4; SNF = 2.6 Steel, 12 gauge base STA-RITE SN SERIES SHALLOW WELL JET PUMPS Model Comparison Chart Model Discharge Suction HP Voltage Phase Approx. Weight Switch Setting SNC-5L 1" NPT 1-1/4" NPT 1/2 115/230 1 45 lbs. 30-50 PSI SNC-L 1" NPT 1-1/4" NPT 1/2 115/230 1 45 lbs. 30-50 PSI SNC-HF25L 1" NPT 1-1/4" NPT 1/2 115/230 1 45 lbs. 20-40 PSI SND-L 1" NPT 1-1/4" NPT 3/4 115/230 1 47 lbs. 30-50 PSI SNE-L 1" NPT 1-1/4" NPT 1 115/230 1 55 lbs. 30-50 PSI SNF-L 1" NPT 1-1/4" NPT 1-1/2 115/230 1 60 lbs. 30-50 PSI PERFORMANCE RATINGS TYPICAL INSTALLATION DIMENSIONAL DATA REPAIR PARTS BROCHURE Sta-Rite SN Series Brochure MANUAL Sta-Rite SN Series Owner's Manual INSTRUCTIONS Sta-Rite Well Pump Pressure Switch Instructions Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

The Sta-Rite ProJet HN series pumps are corrosion and abrasion-resistant and are ideal for wells with pumping levels of 25' or less. These pumps are ideal for water and sprinkling systems in homes, farms and cottages. Self-priming after the pump housing is initially filled with water. Features Quality Construction: Close-grained cast iron body, specially treated for corrosion resistance. Drain port provided for easy winterizing. Built-in Jet: High-strength Lexan nozzle and venturi for maximum resistance to corrosion and abrasion. Cleanout plug provided for ease of service. Noryl impeller: Precision-molded for perfect balance...ultra-smooth for highest performance and efficiency. Precision-Molded Diffuser: Pump primes faster, handles more air, with multi-port, precision-molded, reinforced polypropylene diffuser. Mechanical Shaft Seal: Precision lapped and highly polished carbon-ceramic, stainless steel construction. Internal design guarantees continuous water lubrication. Motor Windings: Superior insulation materials protect against excessive moisture and contaminants ensure prolonged motor life. Balanced Rotor: Diecast under high pressures for uniform performance and gr eater efficiency, dynamically balanced. Heavy-Duty Ball Bearings: Shielded, permanently lubricated bearings, extensively tested to ensure extended life and smooth, quiet operation. Pump and Motor Shaft: Stainless steel for maximum corrosion resistance; one-piece threaded shaft for positive impeller drive and alignment. Pressure Switch: Professional quality, allows cut-in and differential adjustment STA-RITE HN SERIES SHALLOW WELL JET PUMPS Model Comparison Chart Model Discharge Suction HP Voltage Phase Approx. Weight HNC-L 1" NPT 1-1/4" NPT 1/2 115/230 1 47 lbs. HND-L 1" NPT 1-1/4" NPT 3/4 115/230 1 65 lbs. HNE-L 1" NPT 1-1/4" NPT 1 115/230 1 70 lbs. PERFORMANCE RATINGS TYPICAL INSTALLATION DIMENSIONAL DATA REPAIR PARTS BROCHURE Sta-Rite HN Series Brochure MANUAL Sta-Rite HN Series Owner's Manual INSTRUCTIONS Sta-Rite Well Pump Pressure Switch Instructions Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

The Sta-Rite PN series pumps are corrosion and abrasion-resistant and are ideal for wells with pumping levels of 25' or less. These pumps can also be used in water systems, mist sprayer systems, poultry fountains, water features and booster applications. Self-priming after the pump housing is initially filled with water. Features Fiberglass-reinforced thermoplastic polypropylene body provides total corrosion resistance and high resistance to abrasion. Built-in Jet: Shallow-well jet has corrosion-resistant polypropylene nozzle and venturi. Impeller: Precision-molded for perfect balance...ultra-smooth for highest performance and efficiency. Precision-Molded Diffuser: Polypropylene diffuser allows pump to prime faster, handle more air. Heavy-Duty Motor: Stainless steel shaft and dual heavy-duty ball bearings. Heavy-Duty Ball Bearings: Shielded, permanently lubricated bearings, extensively tested to ensure extended life and smooth, quiet operation. Dual Voltage Capability: Dual voltage motors are shipped at the 230-volt setting. Professional Quality, Pre-set 30-50 PS i : Allows for cut-in pressure adjustments. New Nozzle Cleanout: Easy plug removal and access for ease of service. New Drain Plug: Bottom-mounted for easy draining and winterization. This item has a 1 year limited warranty. STA-RITE PN SERIES SHALLOW WELL JET PUMPS Model Comparison Chart Model Discharge Suction HP Voltage Phase Approx. Weight PNC-10 1" NPT 1-1/4" NPT 1/2 115/230 1 21 lbs. PND-10 1" NPT 1-1/4" NPT 3/4 115/230 1 24 lbs. PNE-10 1" NPT 1-1/4" NPT 1 115/230 1 26 lbs. PERFORMANCE RATINGS TYPICAL INSTALLATION DIMENSIONAL DATA REPAIR PARTS BROCHURE Sta-Rite FN Series Brochure MANUAL Sta-Rite PN Series Owner's Manual INSTRUCTIONS Sta-Rite Well Pump Pressure Switch Instructions Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

Sta-Rite's FN Series shallow well jet pump provides strong performance with good pressure for wells to 25 ft. deep. Features: Quality Construction: Close-grained cast iron body and base, specially treated for corrosion resistance. Drain port provided for easy winterizing. Built-in Jet: High-strength polycarbonate nozzle and venturi for maximum resistance to corrosion and abrasion. Cleanout plug provided for ease of service. Noryl Impeller: Precision-molded for perfect balance…ultra-smooth for highest performance and efficiency. Precision-Molded Diffuser: Pump primes faster, handles more air, with multiport, precision-molded, reinforced polypropylene diffuser. Mechanical Shaft Seal: Precision lapped and highly polished carbon-ceramic, stainless steel construction. Internal design guarantees continuous water lubrication. Motor Windings: Superior insulation materials protect against excessive moisture and contaminants…assure prolonged motor life. Balanced Rotor: Diecast under high pressures for uniform performance and greater efficiency, dynamically balanced. Heavy-Duty Ball Bearings: Sealed, permanently lubricated bearings, extensively tested to ensure extended life and smooth, quiet operation. Pump and Motor Shaft: Stainless steel for maximum corrosion resistance; one-piece threaded shaft for positive impeller drive and alignment. Dustproof Cover: All electrical components are protected from dirt, dust and insects by a dustproof canopy; ventilating air cannot contaminate vital switching components. Pressure Switch: Adjustable cut-in and ordering information fixed differential (20 PSI). Applications Water systems and sprinkling for homes, farms and cottages This item has a 1 year limited warranty. STA-RITE FN SERIES SHALLOW WELL JET PUMPS Model Comparison Chart Model Discharge Suction HP Voltage Switch Setting Approx. Weight FNC-L 1" 1-1/4" 1/2 115/230 30-50 PSI 46 lbs. FND-L 1" 1-1/4" 13/4 115/230 30-50 PSI 47 lbs. PERFORMANCE RATINGS TYPICAL INSTALLATION DIMENSIONAL DATA REPAIR PARTS BROCHURE Sta-Rite FN Series Brochure MANUAL Sta-Rite FN Series Owner's Manual INSTRUCTIONS Sta-Rite Well Pump Pressure Switch Instructions Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

The Sta-Rite ClearJet (CJ) series shallow well jet pumps provide excellent performance with good pressure for wells to 25' deep in homes, farms and cottages. These pumps are self-priming after the priming chamber has been filled with water. Features Corrosion Free - Stainless steel pump body provides maximum resistance to corrosion Built-in Jet - High strength thermoplastic components are corrosion resistant. Mechanical Shaft Seal - Highly polished carbon-ceramic and stainless steel construction. Motor Windings - Superior insulation materials protect against excessive moisture and contaminants --assure prolonged motor life. Balanced Rotor: Diecast under high pressures for uniform performance and greater efficiency, dynamically balanced. Heavy-Duty Ball Bearings: Shielded, permanently lubricated bearings, extensively tested to ensure extended life and smooth, quiet operation. Pump and Motor Shaft: Stainless steel for maximum corrosion resistance; one-piece threaded shaft for positive impeller drive and alignment. Dustproof Cover: All electrical components are protected from dirt, dust and insects by a dustproof canopy; ventilating air cannot contaminate vital switching components. Pressure Switch: Quality, fixed differential (20 PSI). This item has a 1 year limited warranty. STA-RITE SERIES SHALLOW WELL JET PUMPS Model Comparison Chart Model Discharge Suction HP Voltage Phase Max. GPM Max. Head Shut-Off Pressure CJ90E 1" NPT 1-1/4" NPT 1 115/230 1 18 150' 64 PSI CJ90F 1" NPT 1-1/4" NPT 1-1/2 115/230 1 18 195' 80 PSI PERFORMANCE RATINGS TYPICAL INSTALLATION DIMENSIONAL DATA REPAIR PARTS BROCHURE Sta-Rite CJ Series Brochure MANUAL Sta-Rite CJ Series Owner's Manual INSTRUCTIONS Sta-Rite Well Pump Pressure Switch Instructions Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.