Blog

The Myers MVPH series of vertical jet pumps are the industry standard deep well jet pumps for over-the well “bolt-on” installations. The MVPH series jet pumps include the pre-plumbed external automatic regulator, pressure gauge, pressure switch, and a complete line of casing adapters for 4" double pipe, 2" or 3" single pipe jet packages. Features Rugged cast iron body 416 Stainless Steel pump body and motor shaft Noryl impeller Close-grained cast iron diffuser Automatic pressure regulator has a faster-acting and quieter, design eliminates “hunting” for correct drive pressure. New improved stem and guide are precisely molded to assure efficient, trouble-free performance on all deep wells Precision machined, close-grained cast iron pump body and base are specially treated to resist corrosion Precision molded noryl impellers for perfect balance, and ultra-smooth for highest performance and efficiency High quality pressure switch; differential and cut-in/cut-out pressure settings are adjustable Motor windings have superior insulation materials to protect against excessive moisture and contaminants to ensure prolonged motor life Mechanical shaft seal has precision lapped and highly polished carbon-ceramic, stainless steel construction Internal design guarantees continuous water lubrication for maximum protection All electrical components are protected from dirt, dust and insects by a dustproof canopy. Ventilating air cannot contaminate vital switching components. This eliminates the most common cause of motor failure Rotor is die cast under high pressures for uniform performance and greater efficiency; dynamically balanced Permanently lubricated sealed bearings are extensively tested to ensure extended life and smooth, quiet operation One piece threaded shaft for positive impeller drive and alignment. Shaft is stainless steel for maximum corrosion resistance Applications Supply water systems and sprinkling systems: Homes Farms Cottages MYERS MVPH SERIES VERTICAL DEEP WELL JET PUMPS Model Comparison Chart Model Discharge (NPT) HP Voltage Phase Shut Off Pressure @ Reg. Setting MVPH-100 1" 1 115/230 1 60 PSI MVPH-200 1" 2 230 1 95 PSI PUMP PERFORMANCE DIMENSIONS JET PACKAGES REPAIR PARTS TROUBLESHOOTING SPECIFICATIONS Myers MVPH Series Vertical Deep Well Jet Pump Specifications MANUAL Myers MVPH Series Vertical Deep Well Jet Pump Manual Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

The Sta-Rite SSJ Series Vertical single stage deep well jet pumps are the industry standard deep well jet pumps for over-the-well “bolt-on” installations. Built for water systems and sprinkling in homes, farms and cottages. Features: Quality Construction - Precision-machined, close-grained cast iron pump body and base are specially treated to resist corrosion. Automatic Pressure Regulator: Faster- acting, quieter design eliminates “hunting” for correct drive pressure. New, improved stem and guide are precisely molded to assure efficient, trouble-free performance on all deep wells. Noryl impellers: Precision-molded for perfect balance, and ultra-smooth for highest performance and efficiency. Pressure Switch: High quality. Differential and cut-in/cut-out pressure settings are adjustable. Dustproof cover: All electrical components are protected from dirt, dust and insects by a dustproof canopy. Ventilating air cannot contaminate vital switching components. This eliminates the most common cause of motor failure. Motor Windings: Superior insulation materials protect against excessive moisture and contaminants to ensure prolonged motor life. Balanced Rotor: Diecast under high pressures for uniform performance and greater efficiency; dynamically balanced. Heavy-Duty Ball Bearings: Shielded, permanently lubricated bearings are extensively tested to ensure extended life and smooth, quiet operation. Pump and Motor Shaft: Stainless steel for maximum corrosion resistance; one-piece threaded shaft for positive impeller drive and alignment STA-RITE SSJ SERIES VERTICAL DEEP WELL JET PUMPS Model Comparison Chart Model Suction Discharge Drive HP Voltage Approx. Weight SSJC 1-1/4" 1" 1" 1/2 115/230 53 lbs. SSJD 1-1/4" 1" 1" 3/4 115/230 63 lbs. SSJE 1-1/4" 1" 1" 1 115/230 65 lbs. PERFORMANCE RATINGS TYPICAL INSTALLATION DIMENSIONAL DATA REPAIR PARTS BROCHURE Sta-Rite SSJ Series Brochure MANUAL Sta-Rite SSJ Series Owner's Manual Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

The Sta-Rite MS series vertical jet pumps are the industry standard deep well jet pumps for over-the-well “bolt-on” installations. The MS series jet pumps include the pre-plumbed external automatic regulator, pressure gauge, and pressure switch. Built for water systems and sprinkling systems in homes, farms and cottages. A complete line of casing adapters to drive the 4" double pipe or 2" and 3" single pipe jet packages are available. A jet package should be ordered with every MS series pump. All installations require an appropriate size adapter flange or casing adapter if bolt-on feature is desired. Features: Automatic pressure regulator: has a faster acting and quieter, design eliminating “hunting” for correct drive pressure. New, improved stem and guide are precisely molded to assure efficient, trouble-free performance on all deep wells Quality, precision machined, close-grained cast iron pump body and base are specially treated to resist corrosion Noryl impellers are precision-molded for perfect balance, and ultra-smooth for highest performance and efficiency Pressure switch is high quality. Differential and cut-in/cut-out pressure settings are adjustable Motor windings have superior insulation materials protect against excessive moisture and contaminants to ensure prolonged motor life Mechanical shaft seal has precision-lapped and highly polished carbon-ceramic, stainless steel construction. Internal design guarantees continuous water lubrication for maximum protection All electrical components are protected from dirt, dust and insects by a dustproof canopy. Ventilating air cannot contaminate vital switching components. This eliminates the most common cause of motor failure Dynamically balanced rotor is diecast under high pressures for uniform performance and greater efficiency Heavy-duty ball bearings are permanently lubricated sealed bearings, extensively tested to ensure extended life and smooth, quiet operation Pump and motor shaft is stainless steel for maximum corrosion resistance. One-piece threaded shaft for positive impeller drive and alignment STA-RITE MS SERIES VERTICAL DEEP WELL JET PUMPS Model Comparison Chart Model Suction Discharge Drive HP Voltage Max. Press. Reg. Setting Approx. Weight MSD-7 1-1/4" 1" 1" 3/4 115/230 40 PSI 67 lbs. MSE-7 1-1/4" 1" 1-1/4" 1 115/230 60 PSI 73 lbs. MSF-7 1-1/4" 1" 1-1/4" 1-1/2 230 85 PSI 120 lbs. MSG-7 1-1/4" 1" 1-1/4" 2 230 95 PSI 125 lbs. PERFORMANCE RATINGS TYPICAL INSTALLATION DIMENSIONAL DATA REPAIR PARTS ACCESSORY PARTS BROCHURE Sta-Rite MS Series Brochure MANUAL Sta-Rite MS Series Owner's Manual Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.