Barnes 104924, Model 2SEV524DS, 2SEV Series, Sewage Pump, 1/2 HP, 240 Volts, 1 Phase, 2" NPT Vertical Flanged Discharge, 135 GPM Max, 28 ft Max Head, 20 ft Cord, Manual, Double Seal
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
Call Toll Free: 800-429-0800
FEATURES
Barnes 2SEV-DS Submersible Non-Clog Sewage Pump
This is a submersible, non-clog sewage pump designed for typical raw sewage applications. This pump has a double seal and can handle spherical solids up to 2 inch in diameter. It has a torque curved, oil filled, squirrel cage induction motor.
Features
- 2" NPT, female, vertical, bolt-on flanged discharge
- Volute, motor housing, impeller and seal plate are cast iron
- Impeller has a vortex open design with pump out vanes on back side
- 416 stainless steel shaft
- Buna-N square rings
- 300 series stainless steel hardware
- Tandem mechanical seal design made of Carbon/Ceramic/Buna-N with oil filled reservoir
- Single row, oil lubricated upper and lower ball bearings
| Brand | Barnes |
| Mfg. Number | 104924 |
| Model | 2SEV524DS |
| Series | 2SEV-DS |
| Product Type | Sewage pump |
| Application | Raw sewage |
| Operation | Manual |
| Horsepower | 1/2 HP |
| Voltage | 240 Volts |
| Phase | 1 |
| Frequency | 60 Hz |
| Speed | 1750 RPM |
| Max. Solid Size | 2" |
| Motor Insulation | Class B |
| Impeller Type | Vortex; open |
| Pump Housing Material | Cast iron |
| Discharge Connection | 2" NPT female, vertical bolt-on flange |
| Impeller Material | Cast iron |
| Seal Type | Double |
| Maximum Flow | 135 GPM |
| Maximum Head | 28 ft |
| Paint | Air dry enamel |
| Thermal Protection | Yes |
| Max. Temperature | 104°F |
| Power Cord Length | 20 ft |
| Motor Casing Material | Cast iron |
| Motor Shaft Material | 416 stainless steel |
| Shaft Seal | Carbon/Ceramic/Buna-N |
| Motor Design | NEMA L |
| Motor Type | Permanent Split Capacitor (PSC) |
| Full Load Current | 6.3 Amps |
| Locked Rotor Current | 14.9 Amps |
| Power Cord Size | 14/3 |
| Cord Type | SOW |
The Barnes 2SEV series of submersible, non-clog sewage pumps are designed for typical raw sewage applications. Th 2SEV series has a single seal and can handle spherical solids up to 2 inches in diameter. This series also has torque curved, oil filled, squirrel cage induction motors. Barnes solids handling pumps are constructed of durable cast iron with oil-filled motors to provide a pump tough enough to meet almost any application need. Features
- 2" NPT, female, vertical, bolt-on flanged discharge
- Volute, motor housing, impeller and seal plate are cast iron
- Impeller has a vortex open design with pump out vanes on back side
- 416 stainless steel shaft
- Buna-N square rings
- 300 series stainless steel hardware
- Tandem mechanical seal design made of Carbon/Ceramic/Buna-N with oil filled reservoir
- Single row, oil lubricated upper and lower ball bearings
| BARNES 2SEV SERIES SEWAGE PUMPS |
Barnes 2SEV Series Sewage Pumps
Model Comparison Chart
| Model | Discharge (NPT Vertical) | HP | Voltage | Phase | GPM | Max. Head |
| 2SEV524DS | 2" | 1/2 | 240 | 1 | 135 | 28' |
| 2SEV594DS | 2" | 1/2 | 200/240 | 3 | 135 | 28' |
| 2SEV544DS | 2" | 1/2 | 480 | 3 | 135 | 28' |
| 2SEV554DS | 2" | 1/2 | 600 | 3 | 135 | 28' |
| 2SEV724DS | 2" | 3/4 | 240 | 1 | 160 | 30' |
| 2SEV1024DS | 2" | 1 | 240 | 1 | 185 | 36' |
| 2SEV794DS | 2" | 3/4 | 200/240 | 3 | 160 | 30' |
| 2SEV744DS | 2" | 3/4 | 480 | 3 | 160 | 30' |
| 2SEV754DS | 2" | 3/4 | 600 | 3 | 160 | 30' |
| 2SEV1044DS | 2" | 1 | 480 | 3 | 185 | 36' |
| 2SEV1054DS | 2" | 1 | 600 | 3 | 185 | 36' |
| 2SEV1094DS | 2" | 1 | 200/240 | 3 | 185 | 36' |
| PERFORMANCE CURVES |
| DIMENSIONS |
| SPECIFICATIONS |
| REPAIR KITS |
| TROUBLESHOOTING |
| SPECIFICATIONS |
| Barnes 2SEV Series Sewage Pump Specifications |
| INSTALLATION MANUAL |
| Barnes 2SEV Series Sewage Pump Installation Manual |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*
