Zoeller 185-0040, Model DX185, X180 Series, Explosion Proof High Head Effluent Pump with Mechanical Float Switch, 1 HP, 230 Volts, 1 Phase, 1-1/2" NPT Flange Vertical Discharge, 85 GPM Max, 73 ft Max Head, 20 ft Cord, Automatic
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
Call Toll Free: 800-429-0800
FEATURES
- Corrosion-resistant, powder-coated epoxy finish
- Durable cast iron constructed cover, motor adapter and pump housing
- Stainless steel plate, bolts, handle, guard and float rod guide, switch arm and actuator assembly
- Shaft seal: stainless steel wetted parts, carbon and ceramic rotary face seal
- Includes a stainless steel lifting bracket for easy installation and removal
- FM listed motor for Class I, Division 1, Group C and D locations
- Oil-filled, hermetically-sealed motor, automatic reset thermal overload protected
- Moisture sensors pre-wired in motor housing (functionality requires indicator circuit in panel)
- Non-clogging bronze vortex impeller design
- Upper ball bearing and lower ball bearing running in bath of oil
- Stainless steel rotor shaft
- Neoprene square ring seals
- UL listed 5-wire SOOW cord
- Sensor leads and power leads in one cord for easy installation
- Maximum temperature for effluent or dewatering is 104°F
- Passes 3/4" spherical solids
- Major width: 13-5/16"
- Major height: 23-9/32"
- On Point: 19-1/2"
- Off Point: 9-3/4"
- 100% submerged and computerized tested
- This model is also available with 25, 35, and 50 ft cord lengths
- Use (P/N l0-1031) seal failure panel to enable moisture sensor circuit
| Brand | Zoeller |
| Mfg. Number | 185-0040 |
| Series | X180 |
| Model | DX185 |
| Product Type | Explosion proof high head effluent pump |
| Application | Effluent/Dewatering |
| Operation | Automatic |
| Switch type | Mechanical float switch |
| Horsepower | 1 HP |
| Voltage | 230 Volts |
| Phase | 1 |
| Frequency | 60 Hz |
| Speed | 3450 RPM |
| Pump Casing | Cast iron |
| Maximum Flow | 84 GPM |
| Maximum Total Head | 72 ft |
| Discharge Connection | 1-1/2" NPT vertical flange |
| Maximum Current | 9.8 Amps |
| Impeller Design | Non-clogging, vortex |
| Power Cord Length | 20 ft |
| Impeller Material | Bronze |
| Maximum Temperature (Continuos) | 104°F |
| Overload Protection | Yes |
The X180 and X190 series of submersible pumps are designed for use in residential or commercial dewatering or effluent applications in Class I, Division 1, Group C and D locations. Each pump is FM/CSA approved and features innovative motor and electrical enclosures that are designed to reduce the risk of vapor ignition both inside and outside the pump. Should vapors inside the electrical enclosures become ignited, the enclosures are engineered to contain the event and prevent escalation. Each pump is constructed of hardware that will allow it to operate safely and efficiently in extreme conditions. As with every Zoeller pump, each one is 100% factory tested to ensure quality and reliability for years of trouble free performance!
WARNING: Not for use in acidic, methanol, or ethyl acetate atmospheres.
Features
Automatic models are available with an optional seal failure panel (P/N 10- 1031).
Nonautomatic units require a Zoeller control panel with intrinsically safe relays and a moisture indicator.
Surface temperature code T5 (1 Ph) or T6 (3 Ph).
Includes a stainless steel lifting bracket for easy installation and removal.
All models are hermetically sealed to be watertight, dust-tight, and completely submersible.
| ZOELLER X180 & X190 SERIES EFFLUENT PUMPS |
Model Comparison Chart
| Model | Discharge (NPT Flange Vertical) | HP | Voltage | Phase | GPM | Max. Head |
| EX185 | 1-1/2" | 1 | 230 | 1 | 85 | 73' |
| IX185 | 1-1/2" | 1 | 200-208 | 1 | 85 | 73' |
| JX185 | 1-1/2" | 1 | 200-208 | 1 | 85 | 73' |
| GX185 | 1-1/2" | 1 | 460 | 3 | 85 | 73' |
| FX185 | 1-1/2" | 1 | 230 | 1 | 85 | 73' |
| EX186 | 1-1/2" | 1-1/2 | 230 | 1 | 58 | 114' |
| EX188 | 1-1/2" | 1-1/2 | 230 | 1 | 145 | 91' |
| IX186 | 1-1/2" | 1-1/2 | 200-208 | 1 | 58 | 114' |
| IX188 | 1-1/2" | 1-1/2 | 200-208 | 1 | 145 | 91' |
| EX191 | 1-1/2" | 2 | 230 | 1 | 45 | 137' |
| EX189 | 1-1/2" | 2 | 230 | 1 | 145 | 110' |
| GX186 | 1-1/2" | 1-1/2 | 460 | 3 | 58 | 114' |
| FX186 | 1-1/2" | 1-1/2 | 230 | 3 | 58 | 114' |
| JX186 | 1-1/2" | 1-1/2 | 200-208 | 3 | 58 | 114' |
| IX189 | 1-1/2" | 2 | 200-208 | 1 | 145 | 110' |
| GX188 | 1-1/2" | 1-1/2 | 460 | 3 | 145 | 91' |
| FX188 | 1-1/2" | 1-1/2 | 230 | 3 | 145 | 91' |
| JX188 | 1-1/2" | 1-1/2 | 200-208 | 3 | 145 | 91' |
| GX189 | 1-1/2" | 2 | 460 | 3 | 145 | 110' |
| FX189 | 1-1/2" | 2 | 230 | 3 | 145 | 110' |
| JX189 | 1-1/2" | 2 | 200-208 | 3 | 145 | 110' |
| DX185 | 1-1/2" | 1 | 230 | 1 | 85 | 73' |
| DX186 | 1-1/2" | 1-1/2 | 230 | 1 | 58 | 114' |
| DX188 | 1-1/2" | 1-1/2 | 230 | 1 | 145 | 91' |
| DX189 | 1-1/2" | 2 | 230 | 1 | 145 | 110' |
| HX188 | 1-1/2" | 1-1/2 | 200-208 | 1 | 145 | 91' |
| HX189 | 1-1/2" | 2 | 200-208 | 1 | 145 | 110' |
| DX191 | 1-1/2" | 2 | 230 | 1 | 45 | 137' |
| PERFORMANCE CURVES |
| DIMENSIONS |
| SERVICE CHECKLIST |
| SPECIFICATIONS |
| TDH FLOW PER MINUTE |
| OWNER'S MANUAL |
| Zoeller X180 & X190 Series Effluent Pumps Owners Manual |
| SPECIFICATIONS |
| Zoeller X180 & X190 Series Effluent Pumps Specifications |
| TECHNICAL DATA |
| Zoeller X180 & X190 Series Effluent Pumps Technical Data |
| WIRING DIAGRAM |
| Zoeller X180 & X190 Series Effluent Pumps Wiring Diagram |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*
