Goulds 3AVN310HM03, Aquavar e-ABII, Booster System with Outdoor Controller (3 HP, 208-230V, 1 Phase Input) and eHM Pump, 3 HP, 208-230/460 Volts, 3 Phase, 1-1/2" NPT Suction, 1-1/4" NPT Discharge, 3 Stages, 75 GPM Max, 168 ft Max Head

FEATURES

Buy Goulds 3AVN310HM03, Aquavar e-ABII, Booster System @ PumpProducts.com

This AB2 variable speed pump controller and complete booster package provides an economical answer for municipal water district customers with low water pressure. Both domestic and light commercial applications can benefit. As water use increases, the controller changes pump speed to maintain pressure. Large supply tanks are eliminated and less wear and tear on your pump and motor.  Think of it as “Cruise Control” for your pump! 

Package includes:

• Pump, model e-HM, 3 stages
• 3 HP intelligent controller, NEMA 3R, model Aquavar IPC
• Transducer, (tank not included)

Aquavar IPC Controller Features

• Input power  200V to 240V ±10%, single phase (low input voltage may affect motor operation)
• Output power up to 230V three phase (based on input voltage)
• Maximum output current is 10.6 amps
• Keypad, LCD graphical display
• Signal lights when power on, inverter stopped, standby, warning/alarms; auto ON
• Over 95% at full load electrical efficiency
• Motor protection against ground fault, motor stall, over temperature, condensation, overload
• Pump protection against  no-flow, under pressure, no water / loss of prime, short-cycle
• Ambient temperature is 34º F to 114º F
• Maximum humidity is 93% at 114º F, non-condensing
• Avoid mounting in areas with excessive dust, acids, corrosives and salts
• Outdoor, NEMA 3R, enclosure
• Wall mounted
• Convection with cast aluminum heat sink, with temperature fan
• Transducer is 4-20 mA power supply, 300 psi range, 16-foot shielded cable

Pump e-HM Features

• 3 HP,  three phase, 208-230/460 volts
• Flows up to 75 GPM
• Heads up to 168 ft
• Close-coupled horizontal multi-stage design with NPT threaded inlet and outlet connections
• High-efficiency motor coupled with an innovative hydraulic design allowing less pump for more performance
• Built to withstand heavy-duty applications in industry
• Made of 316 stainless steel and construction incorporating a 20% increase in the pump body thickness to ensure enhanced durability and reliability
• Offers a potential of 30% in energy savings versus the competition
• Standard TEFC (IP55) motor enclosure can be paired with Goulds variable speed drives such as Hydrovar
• Almost silent, even when it’s working at its peak due to high-efficiency hydraulics, motor and thick metal pump body

Applications

• Low water pressure applications
• Domestic and light commercial applications
• Homes with multiple showers/baths
• Irrigation

Photo is illustrative and may not reflect the actual product.