Goulds 3SD52F1DA, 3SD Series, Sewage Pump, 1-1/2 HP, 230 Volts, 1 Phase, 13.5 Amps, 3" Flanged Horizontal Discharge, 322 GPM Max, 38 ft Max Head, 20 ft Cord, Manual

FEATURES

Goulds 3SD Series Non-Clog Submersible Sewage Pump Dual Seal With Seal Sensor Probe

This pump is designed for sewage, effluent, and wastewater application and is capable of handling sewage containing non-abrasive 2-1/2 inch maximum solids.

Features

• Cast iron, two vane semi-open, non-clog impeller with pump-out vanes for mechanical seal protection. Balanced for smooth operation. Silicon bronze impeller available as an option.
• Heavy duty cast iron, volute type casing for maximum efficiency. 3" flange conforms to 125 # ANSI standard. Connects to A10-30 guide rail system.
• Dual Mechanical Seals: Silicon carbide vs. silicon carbide outer seal and ceramic vs. carbon inner seal, stainless steel metal parts, BUNA-N elastomers. Upper and lower shaft seals are positioned independently and are separated by an oil-filled chamber.
• Seal Sensor Probe located in oil-filled chamber. If pumpage should begin to leak past lower seal it indicates to pump control panel a fault has occurred. Requires optional Seal Fail Circuit in the control panel.
• 300 series stainless steel keyed design shaft.
• 300 series stainless steel fasteners.
• Capable of running dry without damage to components.

• Sewage systems
• Hospitals
• Flood and pollution control
• Trailer courts
• Dewatering/Effluent
• Motels
• Farms