Goulds 4SD52F2EA, 4SD Series, Sewage Pump With Seal Sensor Probe, 1-1/2 HP, 200 Volts, 3 Phase, 11.5 Amps, 4" Flanged Horizontal Discharge, 345 GPM Max, 20 ft Max Head, 20 ft Cord, Manual, Dual Seal

FEATURES

Goulds 4SD Dual Seal Sewage Pump

Heavy duty cast iron pump capable of handling sewage containing up to 3-inch non-abrasive solids.  Designed for use on guide rail systems and base elbow disconnect systems fitted with vertical 125# ANSI flanges for horizontal discharge.

Features

• Cast iron, two vane semi-open, non-clog impeller with pump-out vanes for mechanical seal protection and balanced for smooth operation
• Volute type casing for maximum efficiency
• 4" flange conforms to 125 # ANSI standard.  Connects to A10-40 or A10-60 guide rail system
• Dual mechanical seal with silicon carbide vs. silicon carbide outer seal and ceramic vs. carbon inner seal stainless steel metal parts
• BUNA-N elastomers
• Upper and lower shaft seals are positioned independently and are separated by an oil-filled chamber
• Seal sensor probe located in oil-filled chamber. If pumpage should begin to leak past lower seal it indicates to pump control panel a fault has occurred (Requires optional seal fail circuit in the control panel)
• Shaft constructed with 300 series stainless steel keyed design
• Fasteners made of 300 series stainless steel
• Capable of running dry without damage to components
• Motor is rated for continuous duty when fully submerged
• Class F insulation
• O-ring assures positive sealing against contaminants and oil leakage
• Class 10 overload protection must be provided in control panel
• Tested to UL 778 and CSA 22.2 108 standards
• CSA listed

Applications

Ideal for use in a variety of residential, commercial and industrial applications such as:

• Sewage systems
• Flood and pollution control
• Dewatering/Effluent
• Farms
• Hospitals
• Trailer courts
• Motels