Goulds 4XD13L3AC, 4XD Series, Explosion Proof Sewage Pump, 10 HP, 230 Volts, 3 Phase, 4" ANSI Flanged Discharge, 1160 GPM Max, 140 ft Max Head, 25 ft Cord
SKU #: 4XD13L3AC
Brand: Goulds
Available For Order! ((Usually Ships 3-5 Days))This product is direct shipped from the manufacturer to our distribution center where it is checked, packaged and processed by our quality control team. The estimated shipping time of 7 to 21 days may vary depending on the manufacturer stock, backlogs or delays. To confirm manufacturer lead time for this item, call our Pump Products sales representatives at 800-429-0800 between the hours of 7:30 A.M. - 4:30 P.M. E.S.T. FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
Some manufacturers require internet retailers to display a price at or above manufacturers established MAP ("Minimum Advertised Price").
Since our price for this product is lower than MAP, the manufacturer does not allow us to display our lowest price until you place the product in the shopping cart. This allows us to continue offering our lowest prices while staying consistent with product manufacturers policy.
This process does not require you to purchase the product - it can be easily removed from shopping cart if needed.
Mon-Fri 7:00 am to 6:00 pm EST
Sat 8:00 am to 4:30 pm EST
Call Toll Free: 800-429-0800
"Ask Inspector PumpHead"
Our Friendly Staff At PumpProducts.com Can Assist You In Placing Your Order.
Sales Representatives Available!
Mon-Fri 7:00 am to 6:00 pm EST
Sat 8:00 am to 4:30 pm EST
This is a non-clog, explosion proof, submersible sewage pump used in hazardous locations. This pump is designed for continuous duty use submerged in water that is 104º F or below. Maximum runtime with pump unsubmerged is 15 minutes. Motor is suitable for 10 starts per hour. This pump can handle a maximum solid size of 3 inches.
Features
Cast iron, two vane closed design impeller for high efficiency and maximum wear life
Replaceable bronze wear ring to renew the running clearances and efficiencies to original conditions
Heavy duty cast iron casing, volute type for maximum efficiency. 4" 125# ANSI cast iron flanged. Adaptable to guide rail mounting system
Two independently mounted mechanical face type seals are separated by an oil filled chamber. The oil chamber acts as a barrier to trap moisture and provide time for a planned shutdown and maintenance. The oil provides lubrication to the internal (upper) seal
Carbon rotating and ceramic stationary faces are standard on both internal (upper) and external (lower) seals. Optional materials are available for the lower seals. These are recommended for applications containing fine solids or abrasives as found in parking lot/garage drainage and construction dewatering jobs
Two-wire, dual moisture sensing probes are located in the oil filled chamber between the inner and outer seals. When connected to a control panel with an optional moisture detection system and an alarm it will detect the presence of moisture should the outer seal fail. It will also detect moisture in the motor chamber and provide a warning prior to water levels reaching the bearing or stator
Single-row, angular contact, Conrad type bearings with a class 3 internal fit conforming to AFBMA standard 20 are used. The bearings are greased for life with a premium moisture resistant polyurea thickened grease containing rust inhibitors and suitable for operation over a range of – 13º F to + 248º F
Impeller mounting screw is 300 series stainless steel with anti-rotational locking patch
Applications
Heavy duty design features for a wide range of commercial and industrial applications such as:
Sewage systems
Flood and pollution control
Industrial dewatering
Wastewater treatment plants
Municipal and subdivision lift stations
Note: Class 10 quick trip overload protection must be provided in control panel.
"Ask Inspector PumpHead"
