Goulds AGS1012, AGS Series, Grinder Pump, 1 HP, 230 Volts, 1 Phase, 2" NPT Discharge, 54 GPM Max, 66 ft Max Head, 20 ft Cord
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Goulds AGS Axial Grinder Pump
The AGS grinder pump features a powerful axial grinder and semi-open impeller technology to easily slice through the solids, flushables and trash found in the modern wastewater stream without roping or clogging. This technology reduces waste to a fine slurry, resulting in minimal downtime and service issues.
Features
- Stainless steel, axial lobe-cutter design with 8-hole cutting plate
- Cast Iron semi open 2 vane impeller
- Cast iron, volute type for high efficiency. Adaptable for guide rail system
- Motor is designed for continuous operation without damage when fully submerged
- Upper and lower single row sealed ball bearings for precision positioning of parts and to carry all radial and thrust loads
- Mechanical seal made of hardfaced silicon carbide on silicon carbide for longer life, stainless steel metal parts, BUNA-N elastomers
- Severe duty power cable for oil and water resistance allows connection to a piggyback float switch.
- O-Ring assures positive sealing against contaminants and oil leakage
- Electro-coat paint process protects all casting surfaces
- Designed for manual operation. Use piggyback float (sold separately) for automatic operation
Applications
- Residential sewage where a gravity system is not practical
- Pressure sewage systems
Brand | Goulds |
Mfg. Number | AGS1012 |
Series | AGS |
Product Type | Grinder pump |
Application | Residential sewage |
Horsepower | 1 HP |
Voltage | 230 volts |
Phase | 1 |
Frequency | 60 Hz |
Speed | 3500 RPM |
Pump Casing | Cast iron |
Discharge Connection | 2" NPT |
Maximum Flow | 54 GPM |
Maximum Total Head | 66 ft |
Impeller Design | Semi open 2 vane |
Impeller Material | Cast iron |
Impeller Diameter | 4.25" |
Motor Design | NEMA 48 frame |
Motor Insulation | Class F |
Overload Protection | Yes |
Maximum Current | 5.5 Amps |
Minimum Casing Thickness | 5/16" |
Casing Corrosion Allowance | 1/8" |
Maximum Working Pressure | 50 psi |
Maximum Submergence | 50 ft |
Maximum Temperature (Continuos) | 104°F |
Power Cable Type | SJTOW with NEMA plug |
Power Cord Length | 20 ft |
Goulds AGS series axial Grinder Pumps use cutting edge grinder technology to meet the demands of modern residential wastewater applications. The AGS series was built for use in residential and small office new construction wastewater applications, applications where modern wastewater flushables create clogging issues and as a 2" sewage pump replacement pump. These pumps are also ideal for residential sewage systems where a gravity system is not practical, as well as pressure sewage systems. The key feature of the AGS series Grinder Pump is the axial grinder coupled with the balanced semi-open impeller that reduces downtime caused by clogging or roping. The axial grinder pairs an eight-hole cutter plate that receives the material and passes it to a three blade cutter that can generate up to 4.9 million biter per hour (at a head of 66' TDH). Waste is thus reduced to a fine slurry, ensuring reduced downtime and smooth operation. The entire cutter is stainless steel, non-clogging design. Other top of the line construction features include a uni-body cast iron volute that can be adaptable for guide rail systems, an AISI 300 series stainless steel motor shaft and upper and lower ball bearings for precise parts positioning, as well as radial and thrust load containment. The mechanical seal is comprised of hardface silicon carbide faces and stainless steel metal parts encased in BUNA-N elastomers. The motor is fully submerged in high grade turbine oil for heat dissipation, permanent lubrication and protection. The severe duty rated power cord is also oil and water resistant. A fixed balance handle makes installation a headache-free process. Goulds Pumps proudly stands by these pumps and offers a three year warranty, as opposed toe the standard one year warranty.
GOULDS AGS SERIES GRINDER PUMPS |
Model Comparison Chart
Model | Discharge | HP | Voltage | Phase | GPM | Max. Head | Cord |
AGS0511 | 2" NPT | 1/2 | 115 | 1 | 46 | 42' | 20' |
AGS0512 | 2" NPT | 1/2 | 230 | 1 | 46 | 42' | 20' |
AGS1012 | 2" NPT | 1 | 230 | 1 | 54 | 66' | 20' |
AGS1011 | 2" NPT | 1 | 115 | 1 | 54 | 66' | 20' |
PERFORMANCE CURVE |
BREAKDOWN DIAGRAMS |
TYPICAL INSTALLATION |
DIMENSIONS |
BROCHURE |
Goulds AGS General Brochure |
TECHNICAL BROCHURE |
Goulds AGS Technical Brochure |
SPECIFICATIONS |
Goulds AGS Specifications |
MANUAL |
Goulds AGS Instruction Manual |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*