Goulds GWP2142, Preassembled Simplex Sewage Package With PV52P1F Pump, 0.5 HP, 230 Volts, 1 Phase, 2" NPT Discharge, (18" x 30") Polyethylene Basin, 18" Structural Foam Cover, 2" Rubber Sleeve Check Valve
SKU #: GWP2142
Brand: Goulds
Available For Order! (Ships Direct From Manufacturer)This product is direct shipped from the manufacturer. The estimated shipping time may vary depending on the manufacturers stock, backlog or delay. If you would like to confirm the manufacturers lead time for this item, call our Pump Products sales team at 800-429-0800 between the hours of 7:30 A.M. - 4:30 P.M. E.S.T.
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Goulds GWP (18" x 30") Sewage Pump Package
Fully assembled at the factory for simplified installation and designed for dewatering wastewater containing solids up to 2", this pump package is ideal for:
- Homes
- Rural water districts
- Parks
- Sewage lift stations
- Waste drainage in new additions below sewer line
- Anywhere waste or drainage must be disposed of quickly, quietly and efficiently
Package includes:
- Pump, model PV52P1F with piggyback wide angle float switch
- Basin (18" diameter x 30" high) with 4" inlet grommet and pump torque stop insert
- Cover with bolts, sealing tape, (2) 2", (1) 3" vent and discharge grommets
- 2" rubber sleeve check valve, model A9-2PH
- Discharge pipe, (2" diameter x 30" long) schedule 40 PVC
Package Features
- Structural foam cover is strong and corrosion resistant
- Vent grommets for both 2" and 3" vent provided to add system flexibility and reduce inventory
- Thermoplastic 4" uniseal inlet grommet
- Factory preset mechanical float switch for dependable automatic operation
- Torque stop insert to stabilize the pump
- Schedule 40, 2" PVC discharge pipe with 1/8" bleed hole is factory installed
- Roll top polyethylene basin with 14 gallons capacity and 4" inlet grommet
Pump PV52P1F Features
- 0.5 HP, 230 Volts, single phase
- 2" NPT discharge
- Passes up to 2" spherical solids
- Maximum capacity is 100 GPM
- Maximum head is 22 feet
- Corrosion resistant construction
- Cast iron body
- Thermoplastic impeller and cover
- Upper sleeve and lower heavy duty ball bearing construction
- Motor is permanently lubricated for extended service life
- Powered for continuous operation
- Vortex impeller
- All ratings are within the working limits of the motor
- Replaceable power cord, heavy duty 16/3 SJTW with NEMA three prong
- Mechanical seal is carbon, ceramic, BUNA and stainless steel
- Stainless steel fasteners
- Built-in thermal overload protection with automatic reset
- Oil-filled design motor
Note: Photo is illustrative and may not reflect the actual product.
Mfg. Number | GWP2142 |
Model Number | GWP |
Product Type | Sewage pump package |
Application | Sewage, sump, dewatering |
Pump Model | PV52P1F |
Operation | Automatic |
Float Switch Style | Piggyback wide angle |
Maximum Head | 22 ft |
Maximum Solids Handling | 2" |
Basin Material | Roll top polyethylene |
Basin Diameter | 18" |
Basin Height | 30" |
Cover Material | Structural foam |
Cover Diameter | 18" |
Check Valve Model | A9-2PH |
Check Valve Type | 2" rubber sleeve |
Discharge Pipe Diameter | 2" |
Discharge Pipe Length | 30" |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
"Ask Inspector PumpHead"
*Note: Picture is illustrative and may not reflect the actual product.*