Goulds SIMRGSKT, Simplex Sewage Grinder Package With RGS2012 Pump (2 HP, 208/230 Volts, 1 Phase, 1-1/4 NPT Discharge), Indoor Control Panel and Float Switches
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Goulds SIMRGSKT Simplex Grinder Package
This simplex sewage grinder package is designed for high head residential sewage applications where a gravity system is not practical. Ideal for pressure sewage systems. Basin not included.
Package includes:
- (1) Grinder pump, model RGS2012
- (1) Simplex indoor control panel, model S10020N1
- (3) Mechanical level float switches, model A2D23W
- (1) Cast iron pump leg (set of 3), model 4K639
Note: For a complete sewage simplex installation, a basin must be purchased separately.
Optional Basins: With guide rail Non-guide rail
- S4UGR48 S4NGRD48
- S4UGR84 S4NGRD84
- D4UGR48 S2NGRD48
- D4UGR84 S2NGRD84
Pump RGS2012 Features
- 2 HP, 208/230 Volts, single phase
- 1-1/4" NPT discharge
- Maximum flow is 41 GPM
- Maximum head is 95 feet
- Maximum submergence is 50 feet
- Temperature: 104º F continuous, 140º F intermittent
- Single mechanical seal: silicon carbide rotary/silicon carbide stationary, 300 series stainless steel metal parts, BUNA-N elastomers.
- Capable of grinding domestic sewage in individual residential applications
- Anti-roping design cutter system with two blade rotary cutter threaded to shaft. Stationary cutter ring is reversible for extended service
- Silicon bronze semi-open impeller with non-overloading two vane design and pump-out vanes for mechanical seal protection
- Cast iron volute type casing for high efficiency
Control Panel S10020N1 Features
- Indoor, no modification available
- Single phase with a range of 0 - 20 Amps
- High level alarm circuit includes spring loaded through door-mounted silence switch for manual silence of alarm horn
- Through door mounted alarm test switch insures proper operation of the alarm circuit without the need to open the panel
- Through door mounted pump run light
- Top mounted high intensity flashing red light provides 360° visibility
- Pulsating, corrosion proof alarm horn
- Color coded wiring, screw type terminals and plug in sockets, insure ease of field servicing
- Field wiring diagram, panel schematic and installation instructions included
- Entire unit is UL and CUL listed
Brand | Goulds |
Mfg. Number | SIMRGSKT |
Series | RGS |
Product Type | Grinder package |
Application | Sewage |
Horsepower | 2 HP |
Voltage | 208/230 volts |
Phase | 1 |
Frequency | 60 Hz |
Speed | 3450 RPM |
Full Load Current | 15 Amps |
Locked Rotor Amps | 59 Amps |
Start Resistance | 2.47 Ohms |
Line-Line | 1.1 |
Fuse/Circuit Breaker | 30 |
Design | Grinder |
Discharge Connection | 1-1/4 NPT |
Maximum Capacity | 41 GPM |
Maximum Head | 95 ft. |
Max. Submergence | 50ft. |
Impeller Material | Silicon bronze |
Pump Housing Material | Cast iron |
Motor Shaft Material | Stainless steel |
Cutter/Cutter Ring Material | Stainless steel |
Shaft Seal | Sil-Carbide-Rotary/Sil-Carbide-Stationary/300SS/BUNA-N |
Motor Insulation | Class F |
Max. Working Pressure | 50 PSI |
Max. Temperature (Continuous) | 104°F |
Max. Temperature (Intermittent) | 140°F |
Power Cord Size | 14/3 |
Cord Length | 20 ft. |
Control Panel | S10020N1 |
Contol Design | Simplex/Indoor |
Max Current (Panel) | 20 Amps |
Switch | A2D23W |
Switch Design | Mechanical level switch |
Goulds RGS series grinder system packages are all-in-one units designed for use in high head sewage applications where a gravity system is not practical, as well as for pressure sewage systems. Both simplex (single pump) and duplex (dual pump) models are available. Control panels and float switches rated for either indoor or outdoor use are available for pairing with both simplex and duplex units. Each package includes:
- RGS2012 grinder pump (2x for duplex)
- Control panel (indoor/outdoor; simplex/duplex)
- Mechanical level float switches
- A cast iron pump leg (set of 3)
The RGS2012 pumps operate at 2 HP, 208/230 volts, single phase power. The maximum flow is 41 GPM, the maximum TDH is 95' and the maximum submergence level is 50'. The grinder uses an anti-roping cutter system with a two blade rotary cutter threaded to the shaft, while the stationary cutter ring is reversible for extended service. The cutter is paired with a silicon bronze semi-open impeller with non-overloading two vane design and pump out vanes for mechanical seal protection. Control panel features vary by indoor/outdoor and simplex/duplex. Each panel does include a high level alarm circuit, a through door mounted pump run light, a top mounted high intensity flashing red light and a corrosion proof alarm horn. The panel may also include color coded components (wiring, screw type terminals), a field wiring diagram and a panel schematic for easy installation and field servicing. Auxiliary alarm contacts for remote connection may also be available. Duplex panels include an alternator selector switch which allows the user the choice of either automatic alternation or a single pump operation, which can be useful if one pump is down for maintenance. A built-in lag delays the pump starting lag for five seconds if both pumps attempt to start simultaneously after a power outage. Optional basins may be purchased separately. Guide rail and non-guide rail basins are available - check specific product listings for compatible basin listings. You can use the below chart to help make your choice:
GOULDS RGS SERIES GRINDER SYSTEM PACKAGES |
Model Comparison Chart
Model | Simplex or Duplex | Discharge | HP | Voltage | Phase | Indoor or Outdoor |
SIMRGSKT | 1-1/4" NPT | Simplex | 2 | 208/230 | 1 | Indoor |
SIMRGSKTN4 | 1-1/4" NPT | Simplex | 2 | 208/230 | 1 | Outdoor |
DUPRGSKT | 1-1/4" NPT | Duplex | 2 | 208/230 | 1 | Indoor |
DUPRGSKTN4 | 1-1/4" NPT | Duplex | 2 | 208/230 | 1 | Outdoor |
PERFORMANCE CURVE |
REPAIR PARTS |
TYPICAL PLUMBING AND INSTALLATION |
GUIDE RAIL EQUIPPED BASIN KIT INSTALLATION |
NON-GUIDE RAIL EQUIPPED BASIN KIT INSTALLATION |
BROCHURE |
Goulds RGS Series Kit Brochure |
INSTALLATION MANUAL |
Goulds RGS Series Kit Manual |
REPAIR PARTS |
Goulds RGS Series Kit Repair Parts |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*