Goulds WS0732B, Model 3886, WS_B Series, Sewage Pump, 3/4 HP, 230 Volts, 3 Phase, 2" NPT Vertical Discharge, 166 GPM Max, 30 ft Max Head, 20 ft Cord, Manual
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Goulds 3886 Submersible Sewage Pump
This pump is capable of handling sewage containing non-abrasive 2 inch maximum solids.
Features
- Cast iron, semi-open, non clog impeller is dynamically balanced with pump out vanes for mechanical seal protection
- Cast iron volute type for maximum efficiency
- Designed for easy installation on A10-20 guide rail or base elbow rail systems
- Mechanical seal with SILICON CARBIDE VS. SILICON CARBIDE sealing faces for superior abrasive resistance, stainless steel metal parts, BUNA-N elastomers
- Corrosion-resistant stainless steel shaft. Threaded design. Locknut on all models to guard against component damage on accidental reverse rotation
- 300 series stainless steel fasteners
- Capable of running dry without damage to components
- Designed for continuous operation when fully submerged
- Single phase models feature capacitor start motors for maximum starting torque
- Built-in overload with automatic reset
- Severe duty oil and water resistant power cords
- Supplied with NEMA three prong grounding plugs
- 2" NPT threaded casing with a vertical discharge
Applications
- Homes
- Sewage systems
- Dewatering / effluent
- Water transfer
Brand | Goulds |
Mfg. Number | WS0732B |
Model Number | 3886 |
Series | WS B |
Product Type | Sewage pump |
Application | Sewage/Effluent/Dewatering |
Operation | Manual |
Horsepower | 3/4 HP |
Voltage | 230 Volts |
Phase | 3 |
Frequency | 60 Hz |
Speed | 1750 RPM |
Impeller Type | Non-clog; semi open |
Discharge Connection | 2" NPT vertical |
Impeller Diameter | 5.38" |
Maximum Flow | 166 GPM |
Maximum Head | 30 ft |
Flow at 10 ft | 145 GPM |
Maximum Solids Handling | 2" |
Thermal Protection | Control panel required |
Flow at 15 ft | 116 GPM |
Flow at 20 ft | 86 GPM |
Power Cord Length | 20 ft |
Flow at 25 ft | 48 GPM |
Flow at 30 ft | N/A |
Flow at 35 ft | N/A |
Locked Rotor Current | 17.3 Amps |
Resistance Start/ Line-Line | NA / 5.6 |
Maximum Current | 3.6 Amps |
KVA Code | J |
Full Load Motor Efficiency | 76% |
Maximum Temperature (Continuos) | 104°F |
Maximum Temperature (Intermittent) | 140°F |
Goulds WS_B Series Model 3886 pumps are rugged cast iron sewage pumps. These pumps were specifically designed for residential or light commercial usage in sewage systems and can also be used for dewatering/effluent and general water transfer applications. Constructed with a semi-open, dynamically balanced non-clog impeller with pump out vanes, this expertly engineered pump can handle waste solids up to 2” in diameter. The volute is cast iron and can easily be installed on the A10-20 guide rail or base elbow rail system. The fasteners and shaft are corrosion resistant stainless steel. The pump can run dry without damage to the main components but is meant to run continuously while submerged. Each pump can withstand 140° F temperatures intermittently and 104° F temperatures continuously. All models featured here are manual and come with a 20 ft. power cord. An option for a bronze impeller is also available.
Goulds WS_B Sewage Pumps Series |
-WS0511B
Model Comparison Chart
Model Number | Discharge | Horsepower | Voltage | Phase | GPM | Max. Head |
WS0311B | 2" NPT | 1/3 | 115 | 1 | 105 | 18 |
WS0312B | 2" NPT | 1/3 | 230 | 1 | 105 | 18 |
WS0318B | 2" NPT | 1/3 | 208 | 1 | 105 | 18 |
WS0511B | 2" NPT | 1/2 | 115 | 1 | 160 | 25 |
WS0512B | 2" NPT | 1/2 | 230 | 1 | 160 | 25 |
WS0518B | 2" NPT | 1/2 | 208 | 1 | 160 | 25 |
WS0532B | 2" NPT | 1/2 | 230 | 3 | 160 | 25 |
WS0534B | 2" NPT | 1/2 | 460 | 3 | 160 | 25 |
WS0538B | 2" NPT | 1/2 | 200 | 3 | 160 | 25 |
WS0712B | 2" NPT | 3/4 | 230 | 1 | 166 | 30 |
WS0718B | 2" NPT | 3/4 | 208 | 1 | 166 | 30 |
WS0732B | 2" NPT | 3/4 | 230 | 3 | 166 | 30 |
WS0734B | 2" NPT | 3/4 | 460 | 3 | 166 | 30 |
WS0738B | 2" NPT | 3/4 | 200 | 3 | 166 | 30 |
WS1012B | 2" NPT | 1 | 230 | 1 | 185 | 38 |
WS1032B | 2" NPT | 1 | 230 | 3 | 185 | 38 |
WS1034B | 2" NPT | 1 | 460 | 3 | 185 | 38 |
WS1018B | 2" NPT | 1 | 208 | 1 | 185 | 38 |
WS1038B | 2" NPT | 1 | 200 | 3 | 185 | 38 |
Performance Curve |
TECHNICAL BROCHURES |
Goulds WS_B Technical Brochure |
INSTALLATION/OPERATION MANUALS |
Goulds WS_B Instruction Manual |
PARTS LISTS |
Goulds WS_B Repair Parts List |
SPECIFICATIONS |
Goulds WS_B Specifications |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, availability and shipping information. Call our toll free number 1-800-429-0800.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*