Liberty LSGV503M-3, LSG500 Series, Manual Submersible Grinder Pump, 5 HP, 200/230 Volts, 3 Phase, 17.5/16.5 Amps, 2", 2-1/2" & 3" Horizontal Flange Discharge, 220 GPM Max, 90 ft Max Head, 35 ft Cord

FEATURES

Liberty Pump LSG500 Series Sewage Grinder pump

This submersible pump shall be capable of handling residential and commercial sewage and grinding it to a fine slurry, enabling it to be pumped over long distances.

Features

• Cast iron construction with durable powder coat finish
• Stainless steel hardware
• System voltages: 208 and 240 volts with utilization voltages: 200 and 230 volts 
• Buna-N O-ring seals
• 2", 2-1/2" & 3" horizontal flange discharge with 2" NPT
• 35 ft. quick-connect cord. Also available in 50 ft. lengths upon request
• V-Slice cutter technology
• Dual seal with seal leak detection
• MidTherm cooling provides more efficient motor cooling
• Balanced stainless steel impeller
• 104°F (40°C) Continuous duty maximum fluid temperature
• Optional 4" ANSI discharge kit K002016 (sold separately)

Control Panel Options

Below are Liberty control panels that can be used with this pump.

• SXS34=3-621
• AES34=3-621
• AES34=4-621

Warranty Disclaimer:

Liberty Pumps, Inc. warrants that pump of its commercial sales are free from all factory defects in material and workmanship for a period of 18 months from date of installation, or 24 months from the date of manufacture, whichever occurs first, and provided that such products are used in compliance with their intended applications as set forth in the commercial sales technical specifications and manuals. The date of installation shall be determined by a completed pump start-up report and warranty registration form. A pump start-up report, filled out by a qualified installer, is required for the warranty to take effect. The report must be submitted within 30 days from the installation date and submitted through the Liberty Pumps website.

Note: The start-up report is under the Manual's tab.