Zoeller 145-0013, Model BN145, Series 140, Flow-Mate Sump & Effluent Pump, 3/4 HP, 115 Volts, 1 Phase, Automatic With Automatic Float, 1-1/2 Inch Discharge
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Zoeller BN145 Effluent Pump
The "Flow-Mate" series of submersible pumps is designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent. These durable cast iron pumps include a powder coated epoxy finish to prevent corrosion and are designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance! This attention to detail is an inherent feature of every pump in this series, making it one of the most reliable in the industry.
Ideal for use in septic systems, low pressure pipe (LPP) and enhanced flow STEP systems.
Features
- Durable, cast iron construction
- Model 145 features an engineered thermoplastic, single vane impeller design and passes 3/4" (19 mm) spherical solids
- Oil-filled and hermetically-sealed, automatic reset thermal overload protection
- Single shaft seal design
- Carbon/ceramic mechanical shaft seals
- Stainless steel bolts and lifting handle
- Upper sleeve and lower ball bearing running in bath of oil
- 1-1/2" NPT vertical discharge
- Operates at 130° F (54° C) in effluent or dewatering applications
- BN and BE models include a variable level float switch and 1-1/2" x 2" PVC adapter fitting
- Corrosion-resistant, powder coated epoxy finish
-
For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump
This series of residential or light commercial effluent or dewatering submersible pumps are used for groundwater, septic tank, low pressure pipe (LPP) and enhanced flow STEP systems. The durable 140 series includes a powder coated epoxy finish to prevent corrosion and is designed to provide great heat dissipation from the motor, ensuring a long service life. Each unit is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance.
- Durable, cast iron construction
- Model 140 features a non-clogging, engineered thermoplastic, vortex impeller design and passes 1/2" (13 mm) spherical solids.
- Model 145 features an engineered thermoplastic, single vane impeller design and passes 3/4" (19 mm) spherical solids.
- Oil-filled and hermetically-sealed, automatic reset thermal overload protection
- Available in both single and double shaft seal designs
- Carbon/ceramic mechanical shaft seals
- Stainless steel bolts and lifting handle
- Upper sleeve and lower ball bearing running in bath of oil
- 1-1/2" NPT vertical discharge
- Operates at 130 °F (54 °C) in effluent or dewatering applications
- BN and BE models include a variable level float switch and 1-1/2” x 2” PVC adapter fitting
- Corrosion-resistant, powder coated epoxy finish
Consult Factory for Special Applications
- Electrical alternators for duplex systems are available and supplied with an alarm
- Mechanical alternators for duplex systems are available with or without alarms
- Control alarm systems are available for 1 Ph pumps used in simplex systems, see FM0732
- Variable level control switches are available for controlling 1 Ph systems
- Double piggyback, variable level float switches are available for variable level long cycle controls
- Sealed Qwik-Box available for outdoor installations, see FM1420
- Consult factory for applications over 130 °F (54 °C)
ZOELLER 140 SERIES EFFLUENT PUMPS |
Zoeller 140 Series Effluent Pump
Model Comparison Chart
Model | Discharge (NPT) | HP | Voltage | Phase | GPM | Max. Head |
E145 | 1-1/2" | 3/4 | 230 | 1 | 61 | 74' |
N140 | 1-1/2" | 1 | 115 | 1 | 86 | 50' |
N145 | 1-1/2" | 3/4 | 115 | 1 | 61 | 74' |
BN145 | 1-1/2" | 0.7 | 115 | 1 | 61 | 74' |
E140 | 1-1/2" | 1 | 230 | 1 | 86 | 50' |
BN145 | 1-1/2" | 3/4 | 115 | 1 | 61 | 74' |
BE145 | 1-1/2" | 3/4 | 230 | 1 | 61 | 74' |
BE140 | 1-1/2" | 1 | 230 | 1 | 86 | 50' |
N4140 | 1-1/2" | 1 | 115 | 1 | 86 | 50' |
N4145 | 1-1/2" | 3/4 | 115 | 1 | 61 | 74' |
BN4140 | 1-1/2" | 1 | 115 | 1 | 86 | 50' |
BN4145 | 1-1/2" | 3/4 | 115 | 1 | 61 | 74' |
E4140 | 1-1/2" | 1 | 230 | 1 | 86 | 50' |
E4145 | 1-1/2" | 3/4 | 230 | 1 | 61 | 74' |
BE4140 | 1-1/2" | 1 | 230 | 1 | 86 | 50' |
PERFORMANCE CURVES |
DIMENSIONS |
REPLACEMENT PARTS |
SERVICE CHECKLIST |
TDH PER MINUTE |
BROCHURE |
Zoeller 140 Series Effluent Pump Brochure |
INSTALLATION INSTRUCTIONS |
Zoeller 140 Series Effluent Pump Installation Instructions |
SPECIFICATIONS |
Zoeller 140 Series Effluent Pump Specifications |
REPAIR PARTS |
Zoeller 140 Series Effluent Pump Repair Parts |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*